dgapcc32.inf Driver File Contents (bts109xp.exe)

; DGAPCC32.INF
;
; This is the Setup information file for the
; Digianswer Demo PC card v1.0
; 
; Copyright 1999, Digianswer A/S

[version]
signature="$CHICAGO$"
Class=Bluetooth
provider=%P_Digianswer%
LayoutFile=layout.inf

[Manufacturer]
%M_Digianswer%=Digianswer

[DIGIANSWER]
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044210]-5EEB
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044210]-DF7A
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044230]-5409
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044230]-C284
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044250]-83EB
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044251]-953F
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER_-_BLUETOOTH_PC_CARD_[8044250]-9B36
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER-BLUETOOTH_PC_CARD-2772
%DigiMCL.DeviceDesc%=DigianswerDev,PCMCIA\DIGIANSWER-BLUETOOTH_DEMO_CARD_II-DAB0

[DigianswerDev]
AddReg=Standard.Reg,NewDriver.Reg,Overrides.Reg
CopyFiles=Sys.CopyFiles,Inf.CopyFiles

[Standard.Reg]
HKR,,DevLoader,,*CONFIGMG
HKR,,Enumerator,,*CONFIGMG
HKR,,CMDrivFlags,1,03,00,00,00

[NewDriver.Reg]
HKR,,DevLoader,0,DGAPCC32.VXD

[Overrides.Reg]
;
HKR,Override,0000,1, \
;
; CONFIGMG_VERSION
;
00,04,00,00, \
;
; PRIORITY
;
00,20,00,00, \
;
; I/O Resource Descriptor
;
24,00,00,00, \ ; Total length of I/O Resource Descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
01,00, \       ; IOD_Count;
0C,00, \       ; IOD_Type;         // IOType_Range = 0x000C
00,00, \       ; IOD_Alloc_Base;
00,00, \       ; IOD_Alloc_End;
00,00, \       ; IOD_DesFlags;
00, \          ; IOD_Alloc_Alias;
00, \          ; IOD_Alloc_Decode;
F8,FF, \       ; IOR_Align;        // Mask for base alignment E0/F0
08,00, \       ; IOR_nPorts;       // Number of ports,
00,01, \       ; IOR_Min;	   // Min port address
FF,FF, \       ; IOR_Max;          // Max port address
00,00, \       ; IOR_RangeFlags;   // Flags
00, \          ; IOR_Alias;        // Alias offset
00, \          ; IOR_Decode;       // Address specified
E5,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \ ; Total length of IRQ Resource Descriptor
04,00,00,00, \ ; ResType_IRQ = 0x00000004
00,00, \       ; IRQD_Flags;
00,00, \       ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \       ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       ; IRQD_Reserved;
30,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts
;
; MEM Resource Descriptor
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;
14,00, \       ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,F0,FF,FF, \ ; MR_Align;         // Mask for base alignment
00,10,00,00, \ ; MR_nBytes;        // Count of bytes
00,00,00,00, \ ; MR_Min;      // Min Address
FF,FF,FF,FF, \ ; MR_Max;      // Max Address
00,00, \       ; MR_Flags;         // Flags
00,00, \       ; MR_Reserved;
02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
               ;         0x08 = 16-bit common mem
00,00,00,00, \ ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \       ; Socket;
02,00, \       ; Attributes;
32, \          ; Vcc;
32, \	       ; Vpp1; 78
32, \	       ; Vpp2; 78
02, \          ; IntType;
00,04,00,00, \ ; ConfigBase. COR0 = 0x400;
08, \	       ; Status;
00, \          ; Pin;
00, \          ; Copy;
41, \	       ; ConfigIndex;
03, \	       ; Present;
;
; TERMINATOR
;
00,00,00,00

;******************************************************************************
; Files to copy
;******************************************************************************

[Sys.CopyFiles]
dgapcc32.vxd
dgahci.vxd
dgal2cap.vxd
dganat.vxd
dgarfcom.vxd
dgavcomm.vxd
dgasdp.vxd
dgandis.sys

[Inf.CopyFiles]
dgapcc32.inf
dganet.inf

[SourceDisksFiles]
dgapcc32.vxd=1
dgahci.vxd=1
dgal2cap.vxd=1
dganat.vxd=1
dgarfcom.vxd=1
dgavcomm.vxd=1
dgasdp.vxd=1
dgandis.sys=1
dgapcc32.inf=1
dganet.inf=1

[SourceDisksNames]
1 = "PC Card Installation Disk", dgapcc32.inf, 0

;******************************************************************************
; Destination Directories
;******************************************************************************

[DestinationDirs]
Inf.CopyFiles=17 ; LDID_INF
Sys.CopyFiles=11 ; LDID_SYS

;******************************************************************************
; Localizable Strings
;******************************************************************************

[strings]
P_Digianswer="Digianswer"
M_Digianswer="Digianswer"
DigiMCL.DeviceDesc="Bluetooth PC Card"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.66