[version]
signature = "$Chicago$"
Class = Net
Compatible = 1
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
provider = %PC_CARD%
LayoutFile = layout.inf
[Manufacturer]
%PC_CARD% = PC_CARD
[PC_CARD]
%PC_CARD.DeviceDesc% = le100cc.ndi, PCMCIA\Dual_Speed-10/100_Port_Attached_PC_Card-B5EF
[le100cc.ndi.NT]
Characteristics = 0x4
BusType = 8
AddReg = le100.ndi.reg, common.reg
CopyFiles = le100.ndis5.CopyFiles
Reboot=1
[le100cc.ndi.NT.Services]
AddService = tx100nds, 2, le100.Service, le100.AddEventLog
[Common.reg]
HKR,Ndi\params\ConnectionType,ParamDesc,0,"Connection Type"
HKR,Ndi\params\ConnectionType,default,0,5
HKR,Ndi\params\ConnectionType,type,0,enum
HKR,Ndi\params\ConnectionType\enum,5,0,"Auto Sense "
HKR,Ndi\params\ConnectionType\enum,6,0,"100Mbps Full Duplex"
HKR,Ndi\params\ConnectionType\enum,4,0,"100Mbps "
HKR,Ndi\params\ConnectionType\enum,2,0,"10Mbps Full Duplex "
HKR,Ndi\params\ConnectionType\enum,0,0,"10Mbps "
HKR, , ConnectionType,0,"5"
;HKR, , ACR,0,"1"
;----------------------------------------------------------------------------
; NE2000 Common
;
[le100.ndi.reg]
HKR, Ndi, Service, 0, "tx100nds"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis5"
HKR, , Pcmcia , 0, "2"
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
[le100.ndis5.CopyFiles]
tx100nds.sys,,,2
[le100.Service]
DisplayName = %Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_AUTO_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\tx100nds.sys
LoadOrderGroup = NDIS
AddReg = TextModeFlags.reg
[le100.AddEventLog]
AddReg = le100.AddEventLog.reg
[le100.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000,"%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
[TextModeFlags.reg]
HKR, , TextModeFlags, 0x00010001, 0x0001
;----------------------------------------------------------------------------
; Win 9x main sections
;
[le100cc.ndi]
AddReg=le100X.ndi.reg,ne2000.ndi.reg,Clone.params.reg, common.reg
CopyFiles = le100X.ndis3.CopyFiles
LogConfig=le100cc.LogConfigOverride
Reboot=1
[le100cc.LogConfigOverride]
IRQConfig=3,4,5,7,10,11,12,13,15
IOConfig=20@200-3FF%FFE0(3FF::)
ConfigPriority = HARDRECONFIG
[le100X.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA-Dual_Speed-10/100_Port_Attached_PC_Card-B5EF"
HKR,Ndi,CardType,,"PCMCIA"
;****************************************************************************
; ne2000 Drivers
;****************************************************************************
; Base section for ne2000 users
[ne2000.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,tx100nds.sys
HKR,,Driver,,"tx100nds.sys"
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"tx100nds"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sectioins
;HKR,Ndi\Install,ndis3,,"le100X.ndis3"
;Install NDIS3
[le100X.ndis3]
CopyFiles = le100X.ndis3.CopyFiles
[le100X.ndis3.CopyFiles]
tx100nds.sys,,,2
;extra params for clones
[Clone.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,60,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00
[SourceDisksNames]
1 = "PCMCIA Fast Ethernet PC Card Driver Disk",,
[SourceDisksFiles]
tx100nds.sys = 1
;
;----------------------------------------------------------------------------
; Destination Directories
;
[DestinationDirs]
DefaultDestDir = 11 ; LDID_SYS
le100X.ndis3.CopyFiles = 11
le100.ndis5.CopyFiles = 12
[Strings]
Service.DispName = "LevelOne 10/100Mbps 16bit iPort PCMCIA Adapter NT Driver"
PC_CARD = "Digital Data Communications"
PC_CARD.DeviceDesc = "LevelOne 10/100Mbps 16bit iPort PCMCIA Adapter"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.