1. 5050g.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (5050g.exe)

README.TXT                                             20 July 1999

Samsung ML-5050G Series Windows Printer Driver v 5.01
For Windows 3.1x, Windows 95/98 and Windows NT 4.0

Contents

-  Features
-  Getting Started


Features

- True 32-bit printing architecture 
All the real printing work is done in fully-preemptive multitasking Win32 
modules, which means you'll be able to work comfortably doing other things 
while your printer prints! SuperPrint 5.0 supports Windows 3.11 using the 
Microsoft Win32s programming specification. 

- Show Status Control
Use this handy checkbox in SuperDriver's Processing tab to cause the 
SuperDriver Status box to open automatically when you start printing.  

- Improving the Appearance of Your Output
Options to improve the appearance of your output are found on the Image and 
Halftoning tabs in your SuperDriver. The driver help file gives information on 
how to use these features.


Getting Started

- First
If you're about to install SuperPrint in Windows 3.1x, please read the section 
below regarding preparing Windows 3.1 for SuperPrint.

- Installation Basics
Insert your "Setup" CD-ROM in the appropriate drive. 

In Windows 95/98 and NT 4.0, click the Start button, choose Run..., and enter 
/Driver/SETUP.EXE (where a is the letter of the drive containing your Samsung Windows 
Printer Driver).

If you are running Windows 3.1x, choose File/Run... from Program 
Manager and enter /Driver/SETUP.EXE (where a is the letter of the drive containing your 
Samsung Windows Printer Driver).

Confirm that you would like to install the ML-5050G Series driver and follow the 
on-screen instructions.

Once you have finished installing printers, click Done.

- After-Installation Issues
If you have questions, driver helpis just a few clicks away. Access the Driver 
options (see table, below) and click the Help tab.

- Uninstall
If you want to uninstall SuperPrint, choose the Uninstall icon from the 
SuperPrint folder (or group).

- Accessing SuperDriver Options
SuperDriver options can be accessed in several ways, with some slight 
differences among the various Windows versions:

Windows NT 4.0
Printers Folder: <right click>/Document Defaults
SuperDriver Status: Setup...
Applications: File/Print/Setup or File/Printer Setup

Windows 95
Printers Folder: <right click>/Properties/32-bit SuperDriver Setup
SuperDriver Status: Setup...
Applications: File/Print/Setup or File/Printer Setup

Windows 3.1x
Control Panel/Printers: Setup
SuperDriver Status: Setup...
Applications: File/Print/Setup or File/Printer Setup


- Preparing to Install in Windows 3.1x Only
To minimize the chance of installation problems, we suggest the following steps 
before you install the Samsung Windows Printer Driver. 

- Set a permanent swap file to equal or double the amount of RAM in your PC.

- If you are installing in a 3.1x version other than Windows for Workgroups, 
you must run SHARE in order to install and use Microsoft's Win32S software. 
SHARE.EXE should be in your DOS directory. Add a line reading SHARE to your 
AUTOEXEC.BAT file, using the full path if necessary (e.g., C:\DOS\SHARE).

- Reboot and install the Samsung Windows Printer Driver.

If you do not already have Microsoft's Win32S installed, the Samsung Windows 
Printer Driver will inform you of this and ask you to run the Setup program for 
Win32S. The system will reboot after the installation. You will need to run the 
Samsung Windows Printer Driver's Setup again to finish installing the Samsung 
Windows Printer Driver.

Application Specific Issues:

- Problem: With some HP LaserJet drivers installed, printing to the Samsung 
driver gives "The requested resources is in use" error message.


- Workaround: Change the port Assignment for the HP LaserJet from LPT1: to 
FILE: when you want to print to the Samsung printer.

- Explanation: The HP LaserJet driver ships with a language monitor which, when 
active, "lock" the parallel port so no other drivers can use the port.  By 
changing the port assignment, the language monitor is temporarily disabled so 
the Samsung driver can print to the Samsung printer.

- How to print with Network printer with Windows 95/98 for MS-Word.
(1)At Server System : Share the Samsung ML-5050G Series printer.
(2)At Client System :
    - First step  : Capture the virtual printer port.
          How to  : Start -->Programs --> Windows Expolorer --> Network Neighborhood
                   --> Entries Network --> Select the shared server Printer
                   --> Click the right mouse button and Capture Printer Port (LPT2:-LPT9:)
    - Second step : Set the port. 
          How to  : Start --> Settings --> Printers --> Samsung ML-5050G Series
                   --> Properties --> Details --> Set the same port with first step.
                   --> OK Click