Manh D6200, Presence Pro BIOS v1.00.03
FILENAME / PARTNUMBER:
05605031.EXE / 905605-031
SUMMARY
File 05605031.EXE contains version 1.00.03.DMO of the Manhattan
D6200 and Presence Pro system flash BIOS.
This issue applies to the following systems: 503223 and 503224.
CREATING THE DISKETTE
Insert a 3.5" formatted 1.44MB diskette into drive A: and run
the EXTRACT utility. This will transfer the diskette image file
to the floppy diskette.
USING THE SOFTWARE
This is a menu-driven BIOS update. The following instructions
provide a two part process to update the BIOS.
PART ONE
1: Insert the Manhattan D6200 BIOS update
diskette in drive A: and boot the system.
2: The first screen will indicate Flash Memory
Update Utility Release 3.2. Press the [Enter]
key to continue.
3: The Main Menu dialog box will appear: Select
Update Flash Memory Area from a file.
4: The Update Flash Area dialog box will appear:
Select
Update System BIOS + User Area.
5: The Enter Path/Filename dialog box will
appear: Press the [TAB] key which highlights
the file listed under the Files: section. An
example of a file name is: IP03DM0.BIO. Press
the [Enter] key after highlighting the file.
6: The next screen will display the Verify Image
dialog box. It will state: "The following
Flash Data File has been successfully loaded.
If this is the correct file for loading into
Flash Memory then select [Conntinue].
Warning: Continuing will destroy the current
contents of this Flash memory area!!
Data Image Title: IPXXDMO_-Production
Timestamp: 01/09/97 - 19:09
BIOS Reserved String 1.00.03 DMO {version of
BIOS}
Continue with programming.
Highlight the above "Continue with
programming" option and press the [Enter] key.
7: The following message will appear:
Re-programming of the system Flash memory has
completed successfully. Reboot or reset the
system now for the changes to take effect.
Press the [Enter] key. The system will reboot
showing the new version of BIOS as it boots.
PART TWO
The AST Banner will display on the screen after following this
process.
1: Follow steps 1 & 2 from above. At step 3,
select
Update User Data Area.
2: At the Enter Path /Filename dialog box, press
the [Tab] key to highlight the file:
AST_UB.USR
Press the [Enter] key.
3: At the Verify Image dialog box, a warning
message will appear similar to Part One's step
6 message. Select
Continue with programming.
4: A message will appear indicating that the
re-programming has completed successfully.
(See Part One, step 7.) Press the [Enter] key.
The system will reboot showing the current version of BIOS as
well as the AST LOGO.
ADDITIONAL INFORMATION
For additional information about this software, see
0390SB.TXT, which has been included with the download.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.