VERSION 1.6
I. IBM 4076 ExecJet II Printer Driver and Lexmark 4076 Mono Printer
Driver for Microsoft Windows 3.1
----------------------------------------------------------------
II. VERSION HISTORY:
Fixed problems with 32 bit applications under MicroSoft
Windows 95.
III. INSTALLATION INSTRUCTIONS:
WINDOWS 95:
PART 1:
1. Before installing the driver, connect your ExecJet II to your computer
as directed in your User's Guide. Power on the printer and install the
color cartridge. After you start Windows 95, you will see a screen with
the following information:
New Hardware Found
ExecJet 4076 II
Note: If you do not see a screen entitled "New Hardware Found", skip the
rest of this section and go to the next section labeled PART 2.
2. Choose "Driver from disk provided by hardware manufacturer" and click OK.
3. Insert the diskette provided by Lexmark into your diskette drive when
prompted or enter the directory on your hard file where the driver files
are located (ex: C:\LXK4076\ ).
4. Follow the instructions on the next screens to complete the installation
of your printer. When you see the printer name displayed, click "Next>",
and continue through the screens. You may choose to print a Test Page
with information about this driver if you like.
5. Windows 95 will copy the driver files to your system and then print the
test page if you have selected that option. The driver installation is
now complete. You should see the Lexmark 4076 icon in your
Printer folder. Right click this icon and select "properties" to change
any settings in your driver. You do not need to continue to the
section labeled PART 2.
If you see the New Hardware screen that is described above more than
once, click "Do not install a driver (Windows will not prompt you again)",
then click OK.
PART 2:
Complete this procedure only if you did not complete the installation
in PART 1 above.
1. Click START.
2. Choose "Settings", then "Printers".
3. Double-click "Add Printer".
4. Follow the instructions on the next screens to complete the
installation of your printer. Click "Have Disk" and insert a
diskette with this driver or point to the driver's location on your
hard disk when prompted (ex: C:\LXK4076). When you see the printer name
displayed, click "Next>", and continue through the screens. If you want to
print a test page, make sure your printer is powered on and a
print cartridge is installed.
5. Windows 95 will copy the driver files to your system and then print
the test page if you have selected that option. The driver
installation is now complete. You should see the Lexmark 4076
icon in your Printer folder. Right-click this icon and
select "Properties" to change any settings in your driver.
WINDOWS 3.1x Installation
1. Start Windows and select and open the MAIN program group.
2. Select and open the CONTROL PANEL program.
3. On the Control Panel dialog, select and open PRINTERS.
The Printers dialog will appear.
4. On the Printers dialog, select ADD. In the List of Printers box,
select "Install Unlisted or Updated Printer". Then select INSTALL.
5. The Install Driver dialog is displayed. Enter the drive (and
path) that contains the new driver files (examples - A:\ or
C:\LXK4076\) and select OK.
6. The Add Unlisted or Updated Printer dialog will be displayed. In
the List of Printers box, select the "Lexmark 4076 Mono Printer" or
"IBM 4076 ExecJet II Printer", then select OK to install the driver
files.
7. When the driver files have been installed, the Printers dialog
will be redisplayed. Select the "Lexmark 4076 Mono Printer" or
"IBM 4076 ExecJet II Printer" in the Installed Printers box; then
select CONNECT. The Connect dialog will be displayed. Select
the desired printer port, normally LPT1:, and select OK. You will
return to the Printers dialog.
8. Select Setup on the Printers dialog. The Lexmark 4076 Mono
Printer or IBM 4076 ExecJet II Printer dialog will be displayed.
On this dialog, you can select default print job attributes such
as graphics resolution, paper source, and paper size. Acknowledge
your choices by selecting OK. You will return to the Printers
dialog.
9. To make the Lexmark 4076 Mono Printer or IBM 4076 ExecJet II
Printer the currently active printer, select SET AS DEFAULT
PRINTER. Select CLOSE to exit PRINTERS and return to the CONTROL
PANEL.
V. SPECIAL INSTRUCTIONS:
None.
VI. DRIVER SUPPORT:
Lexmark provides technical support for this printer driver. Call
the Lexmark Hotline at (606) 232-3000.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.