BIOS defulat value for ATX-7308/7332 --- Main --- System Time [xx:xx:xx] <- don't care by load setup default System Date [xx:xx:xx] <- don't care by load setup default Primary Master [Auto] <- HDD Name Primary Slave [Auto] Secondary Master [Auto] <- DVD-RW or DVD Name Secondary Slave [Auto] <- CD or CD-RW Name Supervisor Password [Disabled] User Password [Disabled] Installed Memory 128MB BIOS Version xxxx <- depends on BIOS version --- Advanced --- CPU Speed 1700 MHz <- depends on CPU I/O Device Configuration Onboard AC97 Audio Controller [Enabled] Onboard 1394 Controller [Enabled] Onboard Lan Controller [Enabled] Onboard Serial Port 1 [3F8H/IRQ4] Onboard Parallel Port [378H/IRQ7] Parallel Port Mode [Normal] PCI Configuration Slot 1 IRQ [Auto] Slot 2 IRQ [Auto] Slot 3 IRQ [Auto] VGA BIOS Sequence [PCI/AGP] Onboard LAN Boot ROM [Disabled] --- Power --- Power Up Control AC PWR Loss Restart [Disabled] PWR Up On Modem Act [Disabled] Wake On LAN [Disabled] Hardware Monitor MB Temperature xxC/xxF <- don't care by load setup default CPU Temperature xxC/xxF <- don't care by load setup default CPU Fan Speed xxxxRPM <- don't care by load setup default Power Fan Speed xxxxRPM <- don't care by load setup default VCORE Voltage x.xV <- don't care by load setup default +3.3V Voltage x.xV <- don't care by load setup default +5V Voltage x.xV <- don't care by load setup default +12V Voltage xx.xV <- don't care by load setup default -12V Voltage -xx.xV <- don't care by load setup default --- Boot --- 1.ATAPI CD-ROM [xxxx] <- DVD Name 2.Removable Device [Legacy Floppy] 3.IDE Hard Drive [xxxx] <- HDD Name 4.Other Boot Device [Disabled] Silent Boot [Enabled]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.