*****************************************************************************
* SMC Networks, Inc. *
* SMC EZ Card 10/100 (SMC1244TX V2) *
* NDIS/5 Driver for Windows 2000 *
* *
* Copyright (C) 2002 SMC Networks, Inc. *
* All Rights Reserved. *
*****************************************************************************
The driver (FastNIC.SYS) conforms to the Network Driver Interface
Specification (NDIS) 5.0, and used with Microsoft Windows 2000.
Installing NDIS5 driver on Microsoft Windows 2000
=================================================
1. Plug SMC EZ Card 10/100 (SMC1244TX V2) into one of the Master
PCI slots of your PCI platform.
2. Turn power ON then boot from Windows 2000.
3. Windows 2000 will prompt "PCI Ethernet Controller" in
"New Hardware Found" dialog box.
4. Select "Search for suitable driver for your device(Recommand)"
from "Found New Hardware Wizard" dialog box, then click "Next"
button.
5. Select "Specify a location" from "Found New Hardware Wizard"
dialog box, then click "Next" button.
6. Insert the SMC EZ Card 10/100 (SMC1244TX V2) Driver Diskette
in your floppy drive.
7. Enter the driver pathname, i.e. A:\win2000 (or B:\), then click
"OK" button from "Found New Hardware Wizard" dialog box.
8. "Found New Hardware Wizard"dialog box will found inf file.
i.e. A:\win2000\FastNIC.INF ,then click "Next" button.
9. Windows 2000 will prompt "SMC EZ Card 10/100 (SMC1244TX V2)"
in "Found New Hardware Wizard" dialog box, then click "Finsh" button.
10. Remove the Adapter Driver Diskette from your floppy drive.
11. Restart your computer to take effect the network function.
Trademarks:
Microsoft Windows 2000 is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.