;--------------------------------------------------------------------------- ; In order to take advantage of the following features, you have to: ; 1) Delete ";" from the first column of each line you want to use. ; 2) Change the right hand side value of "=" to the desired value. ; 3) Open the file "oemsetup.inf" and remove the semicolon (;) ; (un-commenting the line) in the line ";1:config.ini". ; ; ** A line starting with ";" means that the line is commented out. ; ** All(+) = ES1879, ES1869, ES1878, ES1868, ES1887, ES1888 ; ; The settings shown here are the default settings, and do not need to ; be un-commented unless you need to change the settings. ;-------------------------------------------------------------------------- ;EnableAutoInstall=1 ; All(+) (0 = force manual installation) ; (1 = system attempts automatic installation) ;DisableMicGain=1 ; 1878 1869 1879 ;2WireExtHWVol=1 ; 1878 1869 1879 (1=2-wire, 0=3-wire mode selection) ;SingleTransferDMA=0 ; All(+) ;es938installed=0 ; All(+) (1/0 = installed/not installed) ; (ES 1869/1879 default to 1, all others to 0) ;3D-Limit=0 ; 1869 1879 ;SpatializerEnable=0 ; 1869 1879 ;New_Laptop.Sys=1 ; All(+) (new if "Laptop.Sys"'s date is 1/7/98 or later) ;defaultExtMidi=0 ; All(+) (set default to internal/external MIDI) ;DisableAuxB=0 ; All(+) (Gray out AuxB from Mixer GUI) ;RecordMonitorMode=0 ; All(+) (1/0 = Default Record Monitor Mode On/Off) ;MutePhoneInPlayMixer=1 ; 1869 (1 = mute phone, 0 = unmute phone in playback mixer) ; ;-------------------------------------------------------------------------- ; The following will be only used for Manual Installation in which user can ; select resource settings(such as IRQ, DMA, etc) through the dialog box. ; Manual installation will occur if forced (above) or if automatic ; installation fails. ;-------------------------------------------------------------------------- ; ;portchoices=220,230,240,250 ; ;irqchoices=2,5,7,10 ; 1879 1869 1878 1868 1888 ;irqchoices=2,5,7,10,11 ; 1887 only ; ;dmachoices=0,1,3,5 ; 1879 1869 1868 1887 ;dmachoices=0,1,3 ; 1888 1878 ; ;irqchoicesWave2=11,12,15 ; 1888 only ;dmachoicesWave2=0,5,6 ; ;configport=800 ; 1879 1869 1878 1868 ;defaultport=220 ;defaultirq=7 ;defaultdma=1 ;defaultwave2dma=0 ;defaultwave2irq=11 ; 1888 only ;defaultportMPU401=320 ; ;Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.