==================================================================
NOTES ON
Installing D-Link DFE-650TXD Fast Ethernet PC Card
For NetWare Server 3.12 Driver Users
==================================================================
(c) 2000 Copyright D-Link Corporation ALL RIGHTS RESERVED
This document contains DFE-650TXD Fast Ethernet PC Card installation notes,
which is not included in the DFE-650TXD Fast Ethernet PC Card USER'S GUIDE
or onscreen instructions, for NetWare Server 3.12 Driver users.
This document contains information on the following topics:
1.0 Overview
2.0 Installation notes for NetWare Server 3.12 Driver users
___________________________________________________________________
1.0 Overview
------------
Please also refer to the INST_DOS.TXT file on the DFE-650TXD Installation
disk.
2.0 Installation Note for NetWare Server 3.12 Driver users
------------------------------------------------------------
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DFCD.EXE before starting the server. *
* *
* Content of CONFIG.SYS *
* --------------------- *
* Add below item to the CONFIG.SYS *
* *
* DEVICE=<PATH>\DFCD.EXE /iop=300 /irq=11 *
* ; <PATH> is a directory include DFCD.EXE file. *
* ; Please refer to the INST_DOS.TXT for details. *
******************************************************************
Modifying an existing NetWare 3.12 Server
-----------------------------------------
1. Please insert release driver diskette into disk drive.
2. Copy all provided NLM and LAN files into your DOS directory
which will include the SERVER.EXE file.
>COPY <PATH>\*.LAN C:\<SRVPATH>
Example: >COPY A:\NETWARE\32BITLAN\*.LAN C:\SRV312
<PATH> here is the directory where DFE650.LAN reside.
3. Start the NetWare Server.
> CD \SRV312
> SERVER
4. From the Novell Server side, execute "LOAD INSTALL". By typing
:LOAD INSTALL
Select <System Option>
Select <Edit Autoexec.NCF file>
5. Add the item below into the server's AUTOEXEC.NCF file.
LOAD C:\SRV312\NBI31X.NLM
LOAD C:\SRV312\MSM31X.NLM
LOAD C:\SRV312\ETHERTSM.NLM
LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_802.3
NAME=DFE650_1_E83
BIND IPX DFE650_1_E83 NET=xxxx
LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_802.2
NAME=DFE650_1_E82
BIND IPX DFE650_1_E82 NET=xxxx
LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_II
NAME=DFE650_1_EII
BIND IPX DFE650_1_EII NET=xxxx
LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_SNAP
NAME=DFE650_1_ESP
BIND IPX DFE650_1_ESP NET=xxxx
6. Restart the server.
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DFCD.EXE before start server. *
* *
* > DFCD /iop=300 /irq=11 *
******************************************************************
3.0 Keywords supported by DFE650
----------------------------------
TP - This keyword specifies that the UTP port on the
adapter.
TP_FULL_DUPLEX - This keyword selects twisted pair connection to
work in full duplex mode.
LINE_SPEED - This keyword selects line speed between 10Mbps and
100Mbps on network cards.
Allowed values are: 10,100
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.