WINCE.TXT Driver File Contents (3C589X.zip)

3Com (R) Corporation LAN Installation Disk
for the 3Com Megahertz LAN PC Card Family
WinCE 2.0 Information

You can use the following Windows CE Hand-held PCs 
with the LAN PC Card:

Cassiopeia Model # A11 & A20 (SH3)
LG Phenom (SH3)
Sharp Mobilon Model # HC4100 (MIPS)
Phillips Velo Model # 500 (MIPS)
Compaq C-Series (MIPS)
NEC MobilePRO 750C (MIPS)

These hand-held PCs can browse the Internet but 
cannot connect to the network like a full service 
PC connects. This PC Card supports
Windows CE 2.0 network functionality only.

To connect the LAN PC Card and install the driver, 
follow these steps:

1.  Establish a connection between the hand-held PC 
    and a Windows 98, Windows 95, or Windows NT PC 
    using a serial cable.

2.  Insert the Windows CE CD in your CD-ROM drive.

3.  Click Start and then click Run in the task bar.

3.  Insert LAN Installation Disk 1 in drive a:
    and type:
    
    a:\win_ce\setup.exe
    
    Setup guides you through  the 3c589 series driver 
    and components installation. Setup.exe is located 
    in the WIN_CE directory.

4.  Wait until the installation is complete.

5.  Do a warm reset on your hand-held PC and plug 
    in the LAN PC Card in the PCMCIA slot of the 
    hand-held PC.

6.  Type Yes when prompted to use the PC Card.

7.  Complete the TCP/IP configuration when prompted.

8.  Remove LAN Installation Disk and restart the 
    hand-held PC.
    
    Installation is complete.


%VER 1.000.000
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.93