1. WT2DNT4Z.ZIP Driver
2. ELSA_T2D.INF File Contents

ELSA_T2D.INF Driver File Contents (WT2DNT4Z.ZIP)

; elsa_t2d.INF
;
; Installation inf for the ELSA WINNER 1000/T2D display driver.
;
; 10/15/97 SKuklik: created this file for WHQL submission

[Version]
Signature="$CHICAGO$"
Provider=%ELSA%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display

[DestinationDirs]
DefaultDestDir  = 11
ELSA_T2D.Miniport  = 12  ; drivers
ELSA_T2D.Display   = 11  ; system32
ELSA_T2D.ConfigFile= 12  ; config files to the drivers directory
COLORcopy.sys   = 11
COLORcopy.hlp   = 18

;
; Driver information
;

[Manufacturer]
%ELSA%   = ELSA.Mfg

;
; This section should be modified to reflect the chip strings the
; user will see in the Displays applet when the new driver is being
; installed from the driver diskette.
;
[ELSA.Mfg]
%ELSA% WINNER 1000/T2D = ELSA_T2D

;
; General installation section
;

[ELSA_T2D]
CopyFiles=ELSA_T2D.Miniport, ELSA_T2D.Display, ELSA_T2D.ConfigFile, COLORcopy.sys, COLORcopy.hlp

;
; File sections
;

[ELSA_T2D.Miniport]
elsat2dm.sys      ; miniport driver

[ELSA_T2D.Display]
elsat2dd.dll      ; standard display driver

[ELSA_T2D.ConfigFile]
;%ELSAConfigFile%     ; **** copy config file ****

[COLORcopy.sys]

[COLORcopy.hlp]


;
; Service Installation
;

[ELSA_T2D.Services]
AddService = ELSA_T2D, 0x00000002, ELSA_T2D_Service_Inst, ELSA_T2D_EventLog_Inst

[ELSA_T2D_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 1                  ; SERVICE_SYSTEM_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary  = %12%\elsat2dm.sys

[ELSA_T2D_EventLog_Inst]
AddReg = ELSA_T2D_EventLog_AddReg

[ELSA_T2D_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\elsat2dm.sys"
HKR,,TypesSupported,0x00010001,7


;
; Software Installation
;

[ELSA_T2D.SoftwareSettings]
AddReg = ELSA_T2D_SoftwareDeviceSettings
AddReg = ELSA_T2D_Configuration   ; mode/refresh config file section
AddReg = ELSACOLOR.AddReg

;
; This section is used to place the mode/refresh configuration filename
; in the Registry. (See [ELSA_T2D.ConfigFile] section above)
;

[ELSA_T2D_Configuration]
;HKR, , ModeCfgFile, %REG_EXPAND_SZ%, \SystemRoot\system32\drivers\%ELSAConfigFile%


[ELSA_T2D_SoftwareDeviceSettings]
HKR,, InstalledDisplayDrivers,     %REG_MULTI_SZ%, elsat2dd
HKR,, VgaCompatible,               %REG_DWORD%,    0

;
; Source file information
;

[SourceDisksNames.x86]
1 = %DiskId%,,,""

[SourceDisksFiles]
elsat2dm.sys      = 1     ; all files on Disk 1
elsat2dd.dll      = 1

[ELSACOLOR.AddReg]
HKLM,Software\ELSA\ELSACOLOR
HKLM,Software\ELSA\ELSACOLOR,Installed,0,1


[Strings]

;
; Non-Localizable Strings
;

REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001
SERVICEROOT    = System\CurrentControlSet\Services

;
; Localizable Strings
;

DiskId      = "ELSA GmbH Installation DISK (VIDEO)"
GraphAdap   = "Graphics Adapter"
ELSA          = "ELSA"

;
; Add the name of the mode/refresh configuration file here. (See the
; [ELSA_T2D.Configuration] section above.  If no configuration file is used,
; set ELSAConfigFile = "".
;
; ex.   ELSAConfigFile = "modes765.cfg"
;
ELSAConfigFile = ""