1.Please save awdflash.exe and 7NFU4A08.bin to floppy Disk 2.Reboot and Press "Del" to enter BIOS Select "Miscellaneous control" ,please Disalbe the item "flash part write protect". Press "F10" to save and exit the BIOS. 2.Then boot the your computer from boot disk. 3.Then replace boot disk with the disk with awdflash.exe & 7NFU4A08.bin. 4.Type awdflash a:\7NFU4A08.bin /sn /py /cc /r /SN (No Save) , /PY (Program BIOS) , /CC (Clear CMOS) , /R (Restart) 5.Finish Auto Program BIOS , Going to "BIOS SETUP" , Select "LOAD SETUP DEFAULTS" , SAVE AND EXIT SETUP PS1 : If Appear Any Error Message , Please Check File is Ready or File Type Name is Right PS2 : You Can Use Awdflash /? Know How to Command ============================================================================================ How To Save BIOS: Run Awdflash.exe file to Save You Mother Board BIOS type awdflash When the " File Name to Program " Appear, press " Enter " Key When the Ask " Do you want to Save Bios (Y/N) " , please Select " Yes " When the " File Name to Save " Appear, Type the file name that You want to Save Example : a:\tx98-a22.bin (If You Want Save to A Disk) ( *.bin File)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.