4D Mouse important notices CAUTION - Class 1 LED DO not look into the LED ! Looking into the LED may harm your eyes! Read the details included at the bottom of this document. NOTE - 4D mouse may not function properly on all surfaces. Surfaces that are too bright, or reflective may cause the mouse/cursor to not track properly or the mouse/cursor may not move at all. If this occurs try using the mouse on another surface. Note2 - You can define the 3rd, 4th, 5th button on Dexxa 4D mouse control panel. Check www.dexxaweb.com for the latest software and additional product information for your new mouse. 1. Hardware Installation 1-1.Installing the Dexxa 4D Mouse with Mouse Port (PS/2) Connector If you have a mouse with a round mouse port connector, you must turn off the computer before connecting or disconnecting your mouse. 2. Dexxa 4D Mouse Driver Installation 2-1. Mouse Driver for Windows NT 3.51 To install Mouse Driver for Windows NT 3.51, insert the floppy into the drive, click on File in Program Manager, select Run, and type A:\SETUP.EXE if you insert the Mouse Driver Disk in drive A. or type B:\SETUP.EXE if you insert the Mouse Driver Disk in drive B. Follow the instructions on the screen. 2-2.Dexxa 4D Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0 To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the floppy into the drive, click on the Start button, select Run, and type A:\SETUP.EXE Where "A:" is the drive number you have. You may type "B:" if you use drive B. Follow the instructions on the screen. A new folder and application will be added to your system tray. 2-3.To remove the Dexxa 4D Mouse Driver In the Dexxa 4D Mouse Driver folder, Click the "Uninstall" icon, and follow the instructions on the screen. 3. Trouble Shooting Symptom 1 : No mouse movement. Solution : - Make sure you have installed the latest software. - Check that mouse is plugged into PS2 port at the back of computer. - Ensure that mouse driver is installed into system. Symptom 2 : The cursor on the screen remains at one spot or moves erratically. Solution : Check the mouse cable for any breaks or sharp twists. Examine the cable closely where it connects to the mouse. Symptom 3 : The cursor movement stops at a corner and no longer responds to the mouse movement. Solution : Run the mouse driver to check which mode the mouse is operating in. Symptom 4 : Mouse movement does not produce corresponding cursor movement or there is a brief pause during movement. Solution : Clean the silicon rubber-coated ball and rollers. Symptom 5 : After had selected mouse type for Windows 95 ,the mouse would be disable when you clicked "OK" . Solution : Using keyboard to close the current window and wait for Windows 95 to give any instruction to restart your computer. After restart Windows 95 the mouse will work normally. Symptom 6 : Displayed error number -115 on screen when install mouse driver software. Solution : The error usually occurs because a virus-checking program is being used on the System to prevent files from being renamed. Please shutdown any virus checking software running on the system and then run the setup again. Symptom 7 : Detection Problems with PS/2 Pointing Devices Solution : If your mouse is connected to the mouse port and is not detected by the system, attempt the following step(s): 1) Your mouse port might need to be enabled through the SETUP menu of your computer. Please check your computer documentation regarding the SETUP menu. 2) If you have a mouse with both serial and mouse port adaptors, connect the mouse to the computer through the PS2 port. Reboot and check if the mouse is detected properly. 3) If adaptor(s) were not included in your package, your mouse was designed to work on only one type of port (Serial OR PS/2). Refer to your package for the type of port your mouse supports. If the problem persists, please check for a possible computer BIOS ROM upgrade from your computer manufacturer. Some notebook systems, such as IBM Thinkpad, have both an external Mouse Port and an integrated Pointing Stick, which is connected to the Mouse Port. If your mouse is having difficulty running on the Mouse Port of this type of system, try using the serial port instead. Symptom 8 : Problems Operating the Wheel Solution : If your mouse is equipped with a wheel and the wheel does not scroll, verify the following: 1) Verify that the latest driver application is installed properly. If you do not find your new mouse icon in the system tray, you need to reinstall mouse software. 2) Some other applications with mouse scrolling function may conflict with this mouse function. Remove these applications before install this mouse software. CAUTION - Class 1 LED DO not look into the LED ! Looking into the LED may harm your eyes! No serviceable parts included. User-observable light is 15 microwatts in normal operation. This device is reated as a commercial product for operation at 40°C (104°F) to 5°C (41°F). This product is tested to comply with FCC standards. For home and office use. Model number. : 4D Mouse This product was tested and complies with the limits for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) tules, and is subject to these conditions; It may not cause harmful interfernce and must accept any interference received, including any that causes undesireable operation. This product has been tested to comply with the International Standard IEC 825-1; 1993. THe standard requires the following statement: CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.