Installation.txt Driver File Contents (

			Windows 2000 Driver

LSI Logic is providing a special, one-time release version driver for
Windows 2000 only, for use with the SYM204xx ISA SCSI cards. This driver
has been functionally tested using Windows 2000 Professional with HP 
Deskscan II v2.8 software, and Windows 2000 Server using the built-in 
imaging software.

This driver is being provided AS-IS, and without technical support from
LSI Logic (formerly Symbios).

Hewlett-Packard has dropped the SYM204xx ISA SCSI card from their 
scanner packages, and no longer support or provide upgrades for this 
ISA SCSI card. This card has reached the end of its technical life span
and is no longer in production or available for distribution.

The LSI Logic supported solution for Windows 2000, or Windows 98 using
a HP scanner, is to upgrade to a PCI SCSI host adpater card, model 
SYM20810 (currently about $30.00). The Logo'ed driver in Windows 2000,
(symc810.sys), as well as the bundled driver in Windows 98 (symc8xx.mpd) 
support this card.

North American users can call our distributor, Insight Electronics at 
1-888-677-3135, for pricing and ordering, or visit their website at:
Overseas users can find the nearest LSI Logic distributor at:

LSI Logic provides a link to older drivers for HP scanners running
Windows 95 and Windows NT4.0 at:

**********************Installation Instructions************************

1. Install Windows 2000; turn off system, add the SYM204xx ISA SCSI 
card, attach the scanner; reboot.

2. Windows 2000 will prompt "Found New Hardware." 

3. Insert floppy disk with the Windows 2000 driver, click on browse, go
to a:\sym4160.inf; click "ok".

4. Windows 2000 will prompt "Digital Signature Not Found." Click "yes".

5. Next should prompt "Hardware Found," click "Finish."

6. The driver is now installed.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.19