MOT1180A.INF Driver File Contents (cm14.exe)

[Version]
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%

[Strings]
Mfg   = "Motorola"
BSPC  = "Motorola BitSURFR PC"

[Manufacturer]
%Mfg% = BSPC_MFG

[BSPC_MFG]   ; Motorola BitSURFR PC
%BSPC% = BSPC_Install,ISAPNP\MOT1180

[BSPC_Install]
AddReg=All, MfgAddReg, BSPC_Registry, INTERNAL

[BSPC_Install.PosDup]
*PNP0500

[BSPC_Registry]
HKR,, DeviceType, 1, 02      ; Internal
HKR,, PortDriver,, "serial.vxd"
HKR,, Contention,, *vcd
HKR,, Properties, 1, 00,01,00,00, ff,00,00,00, 00,00,00,00, 07,00,00,00, 00,00,00,00, 30,00,00,00, 00,c2,01,00, 00,fa,00,00
HKR,, FClass, 1, 00,00,00,00

[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00

[INTERNAL]
HKR,, DeviceType, 1, 02

[MfgAddReg]
HKR,, InactivityFormat,, "seconds"
HKR, Init,      2,, "AT &F <cr>"
HKR, Init,      3,, "AT&C1&D2E0S0=0\Q3<cr>"
HKR, Monitor,   1,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, SpeakerVolume_Low,,
HKR, Settings, SpeakerVolume_Med,,
HKR, Settings, SpeakerVolume_High,,
HKR, Settings, SpeakerMode_Off,,
HKR, Settings, SpeakerMode_Dial,,
HKR, Settings, SpeakerMode_On,,
HKR, Settings, SpeakerMode_Setup,,
HKR, Settings, FlowControl_Off,, "\Q"
HKR, Settings, FlowControl_Hard,, "\Q3"
HKR, Settings, FlowControl_Soft,, "\Q1"
HKR, Settings, Modulation_CCITT,,
HKR, Settings, Modulation_Bell,,
HKR, Settings, SpeedNegotiation_Off,,
HKR, Settings, SpeedNegotiation_On,,
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,,
HKR, Settings, Blind_On,,
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,,
HKR, Fax, Class1DTESpeed,, "AUTO"
HKR, Fax, Class1FlowOff,, "\Q"
HKR, Fax, Class1FlowHW,, "\Q3"
HKR, Fax, Class1FlowSW,, "\Q1"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "5<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 3.43