; ; WFW 3.11 installation file (oemsetup.inf) for V4.15 ; ; NDIS3 driver (enhanced mode) for DE434, DE435, DE450, DE500 ; NDIS2 driver (real mode) for DE500 ; ODI driver (NetWare) for DE500 ; ; For an on-board DC21040-based controller, choose DE435. ; For an on-board DC21041-based controller, choose DE450. ; [data] type=network version=10.4.15 [disks] y=.\ndis2\dos\,"Digital DE500 Fast EtherWORKS PCI 10/100 Driver Disk", disky z=.\wfw\,"Digital EtherWORKS PCI Driver Disk", diskz [netcard] ; ; MSID = 0 (Microsoft ID) ; media = ethernet ; mode = 1 (ndis2) + 2 (ndis3) + 4 (ndis3 via odi mappers) = 7 ; (types of drivers) ; install = adapter_install (file install info for this driver) ; (maps to ndis3 mac section name in protocol.ini) ; protocol = adapter_nif (contains protocol.ini info for this driver) ; (applies only to ndis2 and ndis3) ; dec$de425="DEC DE425 EtherWORKS TURBO EISA",0,ndis,ethernet,0x02,de425_install,de425_nif dec$de434="DEC DE434 EtherWORKS TURBO PCI TP",0,ndis,ethernet,0x02,de434_install,de434_nif dec$de435="DEC DE435 EtherWORKS TURBO PCI",0,ndis,ethernet,0x02,de435_install,de435_nif dec$de450="DEC DE450 EtherWORKS TURBO PCI 10",0,ndis,ethernet,0x02,de450_install,de450_nif dec$de500aa="DEC DE500-AA/XA Fast EtherWORKS PCI 10/100",0,ndis,ethernet,0x07,de500_install,de500aa_nif dec$de500ba="DEC DE500-BA Fast EtherWORKS PCI 10/100",0,ndis,ethernet,0x07,de500_install,de500ba_nif dec$de500fa="DEC DE500-FA Fast EtherWORKS PCI 100 Fiber",0,ndis,ethernet,0x05,de500fa_install,de500fa_nif dec$21142="DEC 21142-based on-board controller",0,ndis,ethernet,0x02,dec21142_install,dec21142_nif ; ; File install information (driver location) ; [de425_install] ndis3=z:dc21x4.386 [de434_install] ndis3=z:dc21x4.386 [de435_install] ndis3=z:dc21x4.386 [de450_install] ndis3=z:dc21x4.386 [de500_install] ndis2=y:de500.dos ndis3=z:dc21x4.386 mlid=*:de500.com [de500fa_install] ndis2=y:de500.dos mlid=*:de500.com [dec21142_install] ndis3=z:dc21x4.386 ; ; protocol.ini information ; [de425_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00021011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"2",,0x20 param=BusNumber,"Enhanced Mode Bus Number",int,"0,2,1",0,0x20 param=BusType,"Enhanced Mode Bus Type",static,"2",,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 ; ; protocol.ini information ; [de434_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00021011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10",4,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"Twisted_Pair,2,TP Full_Duplex,3,TP No_Link_Test,4",2,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",60,0x20 [de435_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00021011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10",4,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"AutoDetect,0,Twisted_Pair,2,TP Full_Duplex,3,TP No_Link_Test,4,BNC,1,AUI,5",0,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",60,0x20 [de450_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00141011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10",4,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"AutoSense,0,AutoSense NoNWay,6,Twisted_Pair,2,TP NWay,7,TP Full_Duplex,3,TP No_Link_Test,4,BNC,1,AUI,5",0,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=NwayProtocol,"Enhanced Mode Nway Protocol",enum,"Disable,0,Enable,1",0,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=SnoozeMode,"Enhanced Mode Snooze Mode",enum,"Disabled,0,Enable,1",0,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",60,0x20 [de500aa_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS2 driver parameters: DRIVERNAME=DE500$,0x10 param=MEDIA,"Real Mode Media Type",enum,"auto,0,10Mb HD,1,100Mb HD,2,10Mb FD,3,100Mb FD,4",0,0x10 param=PCI_CARD,"Real Mode Adapter Instance",int,"1,10,1",1,0x10 param=BURST_LENGTH,"Real Mode DMA BurstSize",enum,"1,1,2,2,4,4,8,8,16,16,32,32",8,0x10 param=CAPTURE_EFFECT,"Real Mode Capture Effect", int,"0,1,1",0,0x10 param=FLAGS,"Real Mode Protocol Stack Implementation",int,"0,1,1",0,0x10 ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00091011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10,32 dwords,20",10,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"AutoSense,0,100Mbps,8,100Mbps Full_Duplex,9,10Mbps,2,10Mbps Full_Duplex,3",0,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=StoreAndForward,"Enhanced Mode Store and Forward",enum,"Cut Through,0,Store and Forward,1",1,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",A0,0x20 param=TransmitThreshold100,"Enhanced Mode 100Mb Transmit Threshold",enum,"128,80,256,100,512,200,1024,400",400,0x20 param=UnderrunThreshold,"Enhanced Mode Underrun Threshold",enum,"10,0A,20,14",0A,0x20 [de500ba_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS2 driver parameters: DRIVERNAME=DE500$,0x10 param=MEDIA,"Real Mode Media Type",enum,"auto,0,10Mb HD,1,100Mb HD,2,10Mb FD,3,100Mb FD,4",0,0x10 param=PCI_CARD,"Real Mode Adapter Instance",int,"1,10,1",1,0x10 param=BURST_LENGTH,"Real Mode DMA BurstSize",enum,"1,1,2,2,4,4,8,8,16,16,32,32",8,0x10 param=CAPTURE_EFFECT,"Real Mode Capture Effect", int,"0,1,1",0,0x10 param=FLAGS,"Real Mode Protocol Stack Implementation",int,"0,1,1",0,0x10 ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00191011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10,32 dwords,20",10,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"AutoSense,0,100Mbps,8,100Mbps Full_Duplex,9,10Mbps,2,10Mbps Full_Duplex,3",0,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=StoreAndForward,"Enhanced Mode Store and Forward",enum,"Cut Through,0,Store and Forward,1",1,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",A0,0x20 param=TransmitThreshold100,"Enhanced Mode 100Mb Transmit Threshold",enum,"128,80,256,100,512,200,1024,400",400,0x20 param=UnderrunThreshold,"Enhanced Mode Underrun Threshold",enum,"10,0A,20,14",0A,0x20 param=SnoozeMode,"Enhanced Mode Snooze Mode",enum,"Disable,0,Enable,1",0,0x20 param=NwayProtocol,"Enhanced Mode Nway Protocol",enum,"Disable,0,Enable,1",0,0x20 [de500fa_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS2 driver parameters: DRIVERNAME=DE500$,0x10 param=MEDIA,"Real Mode Media Type",enum,"100Mb HD,2,100Mb FD,4",2,0x10 param=PCI_CARD,"Real Mode Adapter Instance",int,"1,10,1",1,0x10 param=BURST_LENGTH,"Real Mode DMA BurstSize",enum,"1,1,2,2,4,4,8,8,16,16,32,32",8,0x10 param=CAPTURE_EFFECT,"Real Mode Capture Effect", int,"0,1,1",0,0x10 param=FLAGS,"Real Mode Protocol Stack Implementation",int,"0,1,1",0,0x10 [dec21142_nif] ; ; The 0x20 at the end of the parameter indicates that this applies to ; NDIS3 only. These parameters will not be added for an NDIS2 driver. ; The 0x10 at the end of the parameter indicates that this applies to ; NDIS2 only. These parameters will not be added for an NDIS3 driver. ; ; NDIS3 driver parameters: param=MajorDriverVersion,"Enhanced Mode MajorDriverVersion",static,"4",,0x20 param=MinorDriverVersion,"Enhanced Mode MinorDriverVersion",static,"15",,0x20 param=AdapterCFID,"Enhanced Mode Adapter CFID",static,"00021011",,0x20 param=AdapterType,"Enhanced Mode Adapter Type",static,"5",,0x20 param=BurstLength,"Enhanced Mode Burst Length",enum,"1 dword,1,2 dwords,2,4 dwords,4,8 dwords,8,16 dwords,10,32 dwords,20",10,0X20 param=BusType,"Enhanced Mode Bus Type",static,"5",,0x20 param=ConnectionType,"Enhanced Mode Connection Type",enum,"AutoSense,0,100Mbps,8,100Mbps FD,9,10BaseT,2,10BaseT FD,3,10BaseT No_Link_Test,4,10Base2,1,10Base5,5",0,0x20 param=MapRegisters,"Enhanced Mode Map Registers",enum,"4,4,8,8,16,10",8,0x20 param=MediaType,"Enhanced Mode Media Type",static,"1",,0x20 param=NwayProtocol,"Enhanced Mode Nway Protocol",enum,:Disable,0,Enable,1",0,0x20 param=PciMechanism,"Enhanced Mode Pci Mechanism",enum,"AutoDetect,0,Mechanism 1,1,Mechanism 2,2",0,0x20 param=ReceiveBuffers,"Enhanced Mode Receive Buffers",enum," 8,8,16,10,32,20,48,30,64,40",10,0x20 param=SnoozeMode,"Enhanced Mode Snooze Mode",enum,"Disabled,0,Enable,1",0,0x20 param=StoreAndForward,"Enhanced Mode Store and Forward",enum,"Cut Through,0,Store and Forward,1",1,0x20 param=TransmitThreshold,"Enhanced Mode Transmit Threshold",enum,"72,48,96,60,128,80,160,A0",A0,0x20 param=TransmitThreshold100,"Enhanced Mode 100Mb Transmit Threshold",enum,"128,80,256,100,512,200,1024,400",400,0x20 param=UnderrunThreshold,"Enhanced Mode Underrun Threshold",enum,"10,0A,20,14",0A,0x20Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.