1. LNIC10_100A_driver_v6_0.zip Driver
2. MSLANMAN.TXT File Contents

MSLANMAN.TXT Driver File Contents (LNIC10_100A_driver_v6_0.zip)

LAN Manager Workstation/Server

Introduction:
-------------
This document describes the procedure to setup Microsoft LAN Manager
Workstation/Server driver for LG LNIC-10/100A Series Fast E-NET Card.

Location of Driver: \MSLANMAN.DOS\DRIVERS\ETHERNET\LNICND\LNICND.DOS


Sample Configuration Files:
---------------------------
   CONFIG.SYS :

       DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
       DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\LNICND\LNICND.DOS


Setup Procedures:
-----------------
   Before you start with the installation process, make sure that the
   adapter is properly installed and configured. Make sure your
   Microsoft LAN Manager is properly installed.

   1. Run the appropriate Microsoft Lan Manager SETUP for computer you
      are setting up. Select "Configuration" item, select the
      <Other Driver> item (the LNIC-10/100A Series driver isn't included on the
      LAN Manager disk) and insert the LNIC-10/100A Series driver disk, specify the
      drive name of the driver disk (don't specify the path name),
      and follow the directions.

   2. When completed, reboot your computer .


NOTES:
------

    Sample PROTOCOL.INI for LAN Manager:

        [PROTMAN]
        DRIVERNAME = PROTMAN$
        DYNAMIC = YES
        PRIORITY = NETBEUI

        [NETBEUI_XIF]
        Drivername = netbeui$
        SESSIONS = 6
        NCBS = 12
        BINDINGS = "LNICND_NIF"
        LANABASE = 0

        [LNICND_NIF]
        ;
        ; LNIC-10/100A Series PROTOCOL.INI Sample Adapter
        ;
        DriverName = LNICND$