README SUPPLEMENT FOR PS DRIVERS Last Modified: 2003/06/10 1. Note for HP LJ8100 users. The older Hewlett Packard LaserJet 8100 PCL 6 driver may interfere with the PostScript driver. To avoid this problem use LaserJet 8100 PCL6 driver V188.8.131.52 or later. 2. Collation When printing multiple copies, turn off collation in the application and turn "Collate" on, on the "DeviceOption" tab. With some applications, collation may significantly slow down your computer. And, some functions may not work correctly. 3. Collation (Windows 2000/XP) Though "Collated" check box becomes available after setting multiple numbers of copies by "Copy Count:" in "Advanced Options" dialog, be sure to set "Collated" check box OFF in performing printing. Collate function must be set by "Document Options" - "Printer Features"- "Collate" in "Advanced Options" dialog. 4. Sample Print/Locked Print without HDD. (Windows NT4.0/2000/XP, Macintosh) When the HDD is not installed, the printer do not support Sample Print and Locked Print, and these are automatically disabled. The printer will print the job as Normal Print. Even though the HDD is not installed, "Sample Print" and "Locked Print" can be selected in the driver. 5. Sample Print from IE5. When printing multiple copies with "Sample Print" using IE5, all copies are printed instead of any one copy. The document is also stored in the "Sample Print", and it consists of the multiple copies. 6. Printing from NetScape4.7 (Macintosh) In Printing with NetScape 4.7, it may cause gridlock and the termination of the application in use. If you use NetScape, be sure to use NetScape 6 or later. 7. MS Word98 document with mixed orientation. (Macintosh) Printing of Macintosh MS Word98 document with mixed paper orientation may produce unexpected result if multiple copies, staple, or duplex is selected. 8. Staple/Punch (Windows NT4/2000/XP, Macintosh) When setting staple or punch, specify Finisher Tray for the Destiination. If print without setting as above, staple/punch will be cancelled. 9. Staple/Punch Position (Windows NT4/2000/XP, Macintosh) If print with staple/punch setting in landscape document, staple/punch will not be done in the specified position. The position of staple/punch will be different depending on the OS and application in use. 10. Staple Display (Windows 2000/XP) "Staple" display in "Features" group box of "General" tab is constantly "No" regardless of Finisher is installed or not. 11. Printing from PageMaker (Macintosh) When printing a document from Macintosh PageMaker, the printer may show "Load Letter" on the operation panel and wait for letter paper. In order to avoid this wait, set letter paper in one of the input tray, or turn off Macintosh "Background Print". (Note you have to turn off "Background Print" from the Finder.) 12. Paper Type If the Paper Source is set to Auto Select Tray, all Paper Types can be selected. So, if you want to specify one of these paper types which can be fed only from Bypass Tray: Labels, Thick, Transparency, set the Paper Source to Bypass Tray(not Auto Select Tray). 13. Watermark and QuarkXpress 4.1 (Windows 95/98/Me, Macintosh) QuarkXpress 4.1 document may not be printed as expected if Watermark is selected. 14. Custom Size Setup (Windows NT4.0/2000/XP) Warning dialog may be displayed even though entering the values within maximum and minimum available values for custom size specified in custom size setup dialog. In this case, please reduce the values to be less than the entered values even if they are within the available range. 15. Printing Custom Size Document from MS-Word (Windows NT4.0/2000/XP) When printing MS Word document using Custom Size, the document may not as expected. 16. Printing Custom Size Document from Acrobat (Windows 95/98/Me) Neither Acrobat 5 nor Acrobat Reader 5 can not use "Other Custom Paper". Use other custom size selection. 17. Data Format (Windows 95/98/Me/NT4.0/2000/XP) Be sure to select "ASCII" to perform "Data format"(Windows 9x) or "Output Protocol"(Windows NT4/2000/XP). If set to "BCP" or "Binary" to perform above operation, it may cause PS error or incorrect setting of numbers of copies. 18. Separator Page (Windows 95/98/Me/NT4.0/2000/XP) If a Separator Page is selected, some document may not print as expected. 19. Custom Size setting (MacOSX Classic Mode) If click "OK"button without naming Custom Size newly created on MacOSX Classic Mode, application may be terminated. When set Custom Size on MacOSX Classic Mode, be sure to enter the newly created Custom Size name before click "OK" button. 20. Printing from PageMaker (Macintosh) If print with "Sample Print", "Locked Print" or "User Code" with the application except PageMaker and print with PageMaker after that, the previous setting of "Sample Print", "Locked Print" or "User Code" is succeeded to the next printing with PageMaker. 21. Page Count in Duplex Printing If specify Duplex in printing the document ends up with odd page number, blank page may be added in the end automatically depending on the combination of PostScript driver and application. The blank page added automatically is counted as 1 printed page in Black & White. 22.Form To Tray Assignment (Windows NT4.0/2000/XP) Do not select "Form To Tray Assignment" item in "Device setting" tab. 23. Rotate function (Windows 95/98/Me) Rotate function does not work for landscape documents. 24. Page Layout (N-up) function (Windows NT4.0) Page Layout (N-up) function does not work with MS-Word2002. 25. Page Layout (Booklet) function (Macintosh) Booklet printing does not operate properly in printing under Macintosh Acrobat. 26. Disorder when pressing "Stop"button in using MacOSX Classic Mode (Macintosh) If stop printing with "Stop" button in using the printer with MacOSX Classic Mode, sometimes printer freezes with "Waiting..." status. 27. Preprinted, Prepunched and Letterhead paper types If use Preprinted, Prepunched or Letterhead paper types for the printing of Landscape document, it might be printed with the unexpected orientation. 28. Printing the document with the plural Simplified Chinese fonts. (Windows XP) The document with the plural Simplified Chinese fonts might not be printed as expected. 29. Printing from PageMaker If you use PageMaker in the Simplified Chinese environment, please use the English-language version of PPD file. When PageMaker is used for the Simplified Chinese-language version's PPD file, the items of "Destination" may not be displayed. 30. Watermark (Windows NT4.0/2000/XP) Only English can be used in Text of Watermark. 31. Printing from Visio2002 with resolution of 1200dpi Printing from Visio2002 with resolution of 1200dpi may not be performed properly. In such case, set the resolution lower than 600 dpi. 32. Print From Microsoft Word enabling Slip Sheet If print from Microsoft Word enabling Slip Sheet, Slip Sheet feeding may not be conducted properly.In this case, perform printing after selecting "Default Tray" in "Page Setup" -> "Paper Source". 33. Output Protocol When output destination of installed driver is network port, output protocol will be set to binary. If redirect the output to LPT1 or USB port remaining the above setting, PS Error may occur. If redirect the output destination from network port to LPT1 or USB port, please set the output protocol to ASCII.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.