1. nd51xxe1.exe Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (nd51xxe1.exe)

NDC SOHOware PCMCIA/ND51XX Adapter
ARTISOFT LANtastic/AI 4.1 Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Run the LANtastic installation program.

          A:install

2)   Select "Novell NE2000 16-bit ISA bus or Compatible" for
     "Network Adapter Installed:" in the installation menu.

3)   Follow the instructions guided by the Installation program to
     finish the installation process.

4)   Edit "STARTNET.BAT" (usually in C:\LANTASTI) to set the
     "IRQ" and "IOBASE".

          "NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"

     Must match the NDCONF1 settings.

     This completes the installation of LANtastic/AI 4.1.


NDC SOHOware PCMCIA/ND51XX Adapter
ARTISOFT LANtastic 6.0 Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the SOHOware PCMCIA adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Run the LANtastic Installation program.

          A:install

2)   Select the "NEX016 Novell NE2000 16-bit ISA bus or Compatible"
     from the installation menu.

          Note: If you select "Support Novell NetWare", you neither
          have to nor have a chance to select a driver for your adapter
          in this step.  In this condition, you have to skip step
          4 and continue with step 5.

3)   Follow the instructions guided by the Installation program to
     finish the installation process.

4)   Edit the "STARTNET.BAT" (usually in C:\LANTASTI) to set the
     "IRQ" and "IOBASE".

          "NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"

     Must match what you specified in NDCONF1.

     This completes the installation of LANtastic 6.0.

5)   Copy the Novell NE2000 ODI driver "NE2000.COM" to your LANtastic
     directory (usually C:\LANTASTI).

          COPY A:\NETWARE\NE2000.COM C:\LANTASTI

6)   Edit the "STARTNET.BAT" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

            :
          LOADHI LSL
          NRODI
            :

     with:

            :
          LOADHI LSL
          NE2000
            :

7)   Edit the "NET.CFG" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

                 :
          LINK DRIVER NRODI
               FRAME ETHERNET_802.3
               FRAME ETHERNET_802.2
               FRAME ETHERNET_II
               FRAME ETHERNET_SNAP
                 :

     with:

                 :
          LINK DRIVER NE2000
               INT 3
               PORT 300
               FRAME ETHERNET_802.3
               FRAME ETHERNET_802.2
               FRAME ETHERNET_II
               FRAME ETHERNET_SNAP
                 :

     where the values of "INT" and "PORT" must match what you
     specified in NDCONF1.

     This completes the installation of LANtastic 6.0 with "Support
     Novell NetWare".