32-bit (NWAY) PCI (Fast) Ethernet Adapter
NDIS/2 DRIVER INSTALLATION FOR LAN MANAGER
===========================================================================
The ETHPCI drivers located in the MSLANMAN.DOS and MSLANMAN.OS2
Directories conform to the Network Driver Interface Specification
(NDIS) 2.0 as defined by Microsoft/3Com.
NDIS Driver Installation on LAN Manager v2.0
============================================
1. Type "Setup" in the LAN Manager directory and press <Enter>.
2. Choose "Import Network Drivers..." in the "Action" field.
Press <Enter> to continue.
3. Insert your Driver Diskette into the floppy diskette drive(A: or B:).
Then press <Enter> and the list of Imported Network Drivers appears
on the screen.
4. Press the <Space> Bar to select the appropriate Network Adapter
(i.e. "32-bit PCI Series (Fast) Ethernet Adapter"), and
then press <Enter> to confirm your choice.
5. Follow screen instructions to continue installation, until the Network
Driver appears on the screen.
6. Identify your Network Adapter if asked. For example, select
"32-bit PCI Series (Fast) Ethernet Adapter"
to confirm any 32-bit PCI Series (Fast) Ethernet Adapter.
7. Select the "Add driver" and the "Add protocol" options.
Then press <OK> to confirm your choices. The Workstation's
primary parameters should appear on your screen.
8. Respond to all prompts issued on the screen.
Select <OK> to confirm a choice.
9. Save all selections. Choose "Save" from the "Action Menu"
10.When the driver is successfully installed, press <F3> to exit.
NDIS Driver Installation on LAN Manager v2.1
============================================
1. Type "lmsetup" in the LAN Manager directory and press <Enter>.
The Microsoft LAN Manager Setup screen will appear.
2. Choose "Network Drivers..." in the "Configuration" field. Press
<Enter> to confirm your choice.
3. Choose "Add New Configuration" and press <Enter> to display a list of
Network Adapter Drivers.
4. Choose "Other Driver" and press <Enter>.
5. Insert the Driver Diskette into the floppy diskette drive(A: or B:).
Indicate the driver location of the diskette and press <OK> to proceed.
6. Select the appropriate Network Adapter Driver from the list.
For example, select
"32-bit PCI Series (Fast) Ethernet Adapter"
Press <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space> bar to highlight
your choice.
8. Select <OK> to confirm your choice. A "Configuration Complete" message
should appear on the screen.
9. Save the configuration by selecting <Save>.
10.When the installation is complete, press <F3> to exit.
NDIS Driver Installation on LAN Manager v2.2
============================================
1. Type "setup" in the LAN Manager directory and press <Enter>.
The Microsoft LAN Manager Setup screen should appear.
2. Choose "Network Drivers" in the "Configuration" field.
Press <Enter> to confirm your choice.
3. Choose "Add New Configuration" and press <Enter> to display a list
of Network Adapter Drivers.
4. Choose "Other Driver" and press <Enter>.
5. Insert the Driver Diskette into the floppy diskette drive(A: or B:).
Indicate the driver location of the diskette and press <OK>.
6. Select the appropriate Network Adapter Driver from the list.
For example, select
"32-bit PCI Series (Fast) Ethernet Adapter"
Press <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space bar> to highlight your
choice. If you have chosen the TCP/IP protocol, you will be prompted to
key in the IP address, the subnet mask, and the default gateway (router).
By default, the workstation number of NetBios session is set to 6.
Please refer to Microsoft LAN Manager Installation Manual for more details,
or check the online help.
8. Select <OK> to confirm your choice. A Configuration Complete message
should appear on the screen.
9. Save the configuration by selecting <Save>.
10.When the installation is complete, press <F3> to exit.
If you are installing the LAN Manager for the first time, you will be prompted
to key in the default user name and domain of the workstation, as well as to
answer the questions concerning Windows environment and memory management. Just
follow the instructions on the screen to complete installation.
Sample Configuration Files
==========================
LAN Manager 2.0
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
DEVICE=C:\HIMEM.SYS
DEVICE=C:\DOS50\SETVER.EXE
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS
PROTOCOL.INI File
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[NETBEUI_XIF]
Drivername = netbeui$
BINDINGS = "ETHPCI_NIF"
[ETHPCI_NIF]
;-----------------------------------------------------------------------
; Sample Protocol.ini file for 32-bit PCI Series (Fast) Ethernet Adapter
NDIS/2 driver
;-----------------------------------------------------------------------
DriverName = ETHPCI$
; Slot = 1 ;; {1-16}
; SIA_Mode = AUTODETECT
;;{SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
; DATA_RATE = MB10 ;; {MB10, MB100}
;-----------------------------------------------------------------------
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS50;C:\NC;
APPEND=C:\PE2;C:\DOS50;
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
NET START WORKSTATION
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
LAN Manager 2.1 or LAN Manager 2.2
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
DEVICE=C:\HIMEM.SYS
REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS -->remark this line
DEVICE=C:\DOS62\SETVER.EXE
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS
PROTOCOL.INI File
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "ETHPCI_NIF"
LANABASE = 0
[ETHPCI_NIF]
;------------------------------------------------------------------------
; Sample Protocol.ini file for 32-bit PCI Series (Fast) Ethernet Adapter
NDIS/2 driver
;------------------------------------------------------------------------
DriverName = ETHPCI$
; Slot = 1 ;; {1-16}
; SIA_Mode = AUTODETECT
;; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
; DATA_RATE = MB10 ;; {MB10, MB100}
;------------------------------------------------------------------------
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS62;C:\NC;
APPEND=C:\PE2;C:\DOS62;
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM=== LANMAN 2.1 ===
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM === LANMAN 2.1 ===
------------------------------------------------------------------------------------
All trademarks or brand names mentioned are properties
of their respective companies.
--- End of File ---
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.