iosocketnew1.inf Driver File Contents (XP_home_driver_iosocketnew1.zip)

Driver Package File Name: XP_home_driver_iosocketnew1.zip
File Size: 3.4 KB

; Socket DPC and Serial IO CF and PC Cards
; Copyright (c) 1994-1998 Microsoft Corporation
; Copyright (c) 1998-2000 Socket Communications

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MS%

[DestinationDirs]
DefaultDestDir  = 11        ;LDID_SYS
LptPort.NT.Copy = 12        ;DIRID_DRIVERS
ComPort.NT.Copy = 12        ;DIRID_DRIVERS
NonPort.NT.Copy = 12        ;DIRID_DRIVERS

; Install class "Ports"
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg

[PortsClass.AddReg]
HKR,,,,%PortsClassName%

[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg

[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"

[ControlFlags]
ExcludeFromSelect=PCMCIA\Socket-Serial_Port_Card_Rev_2.3-E88F
ExcludeFromSelect=PCMCIA\Socket-Serial_Port_Card_Rev_2.4-8573
ExcludeFromSelect=PCMCIA\DATA_ACQUISITION-SOCKET_COMMUNICATIONS_INC_REV_B-0854
ExcludeFromSelect=PCMCIA\DATA_ACQUISITION-CF-SOCKET_COMMUNICATIONS_INC_REV_A-B6C6
ExcludeFromSelect=PCMCIA\Socket-Data_Acquisition_CF_Adapter_Rev_D_3&5V-201E
ExcludeFromSelect=PCMCIA\Socket-Serial_Port_CF_Adapter_Rev_A_3&5V-6BA6
ExcludeFromSelect=PCMCIA\Socket-CF+_Serial_Port_Card_Rev_2.3-EF12
ExcludeFromSelect=PCMCIA\Socket-LS-2104_BarCode_Rev_A-310C
ExcludeFromSelect=PCMCIA\Socket-LS-4004_BarCode_Rev_A-363E
ExcludeFromSelect=PCMCIA\Socket-Data_Phone_CF_Adapter_Rev_D_3&5V-9BEE
ExcludeFromSelect=PCMCIA\Socket-CF+_CDMA_DPC_Card_Rev_E-30AD
ExcludeFromSelect=PCMCIA\Socket-CF+_DPC_GSM_Card_Rev_2.3-DCC2
ExcludeFromSelect=PCMCIA\Socket-CF+_DPC_CDMA_Card_Rev_2.3-8264
ExcludeFromSelect=PCMCIA\Socket-CF+_ISC_Card_Rev_2.3-B68E
ExcludeFromSelect=PCMCIA\Socket-CF+_DPC_CDMA-6185_Card_Rev_2.3-E64F
ExcludeFromSelect=PCMCIA\Socket-CF+_DPC_Generic_Card_Rev_2.3-F8F6

; Drivers
;----------------------------------------------------------
[Manufacturer]
%Socket%=Socket

[Std]
%*PNP0500.DeviceDesc% = ComPort, *PNP0500           ; Communications Port
%*PNP0501.DeviceDesc% = ComPort, *PNP0501           ; Communications Port
%*PNP0502.DeviceDesc% = MultiComPort, *PNP0502      ; Multi Communications Port

[Socket]
%Socket-E88F.DeviceDesc% = ComPort, "PCMCIA\Socket-Serial_Port_Card_Rev_2.3-E88F"
%Socket-8573.DeviceDesc% = ComPort, "PCMCIA\Socket-Serial_Port_Card_Rev_2.4-8573"
%Socket-0854.DeviceDesc% = ComPort, "PCMCIA\DATA_ACQUISITION-SOCKET_COMMUNICATIONS_INC_REV_B-0854"
%Socket-B6C6.DeviceDesc% = ComPort, "PCMCIA\DATA_ACQUISITION-CF-SOCKET_COMMUNICATIONS_INC_REV_A-B6C6"
%Socket-201E.DeviceDesc% = ComPort, "PCMCIA\Socket-Data_Acquisition_CF_Adapter_Rev_D_3&5V-201E"
%Socket-6BA6.DeviceDesc% = ComPort, "PCMCIA\Socket-Serial_Port_CF_Adapter_Rev_A_3&5V-6BA6"
%Socket-EF12.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_Serial_Port_Card_Rev_2.3-EF12"
%Socket-310C.DeviceDesc% = ComPort, "PCMCIA\Socket-LS-2104_BarCode_Rev_A-310C"
%Socket-363E.DeviceDesc% = ComPort, "PCMCIA\Socket-LS-4004_BarCode_Rev_A-363E"
%Socket-9BEE.DeviceDesc% = ComPort, "PCMCIA\Socket-Data_Phone_CF_Adapter_Rev_D_3&5V-9BEE"
%Socket-30AD.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_CDMA_DPC_Card_Rev_E-30AD"
%Socket-DCC2.DeviceDesc% = ComPort, "PCMCIA\Socket-Serial_Port_HS_Card_Rev_2.5-56B5"
%Socket-8264.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_DPC_CDMA_Card_Rev_2.3-8264"
%Socket-B68E.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_ISC_Card_Rev_2.3-B68E"
%Socket-E64F.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_DPC_CDMA-6185_Card_Rev_2.3-E64F"
%Socket-F8F6.DeviceDesc% = ComPort, "PCMCIA\Socket-CF+_DPC_Generic_Card_Rev_2.3-F8F6"

[*pnp0400.det]
AddReg=Ports.AddReg

[Ports.AddReg]
HKR,,NoSetupUI,,1

[*pnp0401.det]
AddReg=Ports.AddReg

[LptPort.PosDup]
*PNP0401

[EcpPort.PosDup]
*PNP0400


; COM sections
;----------------------------------------------------------
[ComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg, ComPort.W95.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa

[ComPort.Copy]
serial.vxd
serialui.dll

[ComPort.AddReg]
HKR,,PortSubClass,1,01

[ComPort.W95.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"

[ComPort.NT]
CopyFiles=ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa

[ComPort.NT.HW]
;
; BUGBUG--remove this line and re-add the specification of serenum as a device-specific
; upper filter.
;
AddReg=ComPort.NT.HW.AddReg

[ComPort.NT.Copy]
serial.sys
serenum.sys

[ComPort.NT.AddReg]
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[ComPort.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"serenum"

; MultiPort COM Sections;
; -------------------------------------------------------

[MultiComPort.NT]
CopyFiles=ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=cm1,cm2,cm3,cm4,dg1,dga,cma

[MultiComPort.NT.HW]
; Add multiport and normal port into the hardware devnode
AddReg=MultiComPort.NT.HW.AddReg,ComPort.NT.HW.AddReg

[MultiComPort.NT.HW.AddReg]
; Add multiport specific info to the hardware devnode
HKR,,MultiportDevice,0x00010001,1

;-------------- Service installation
; Port Driver (function driver for this device)
[ComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst

[MultiComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst

; -------------- Serial Port Driver install sections
[Serial_Service_Inst]
DisplayName    = %Serial.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
ServiceBinary  = %12%\serial.sys
LoadOrderGroup = Extended base

; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName    = %Serenum.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START 
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\serenum.sys
LoadOrderGroup = PNP Filter

[Serial_EventLog_Inst]
AddReg = Serial_EventLog_AddReg

[Serial_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
HKR,,TypesSupported,0x00010001,7

[*pnp0500.det]
AddReg=Ports.AddReg,DevMap.AddReg

; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)

[c14]                   ; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4

[c1a]                   ; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c23]                   ; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3

[c2a]                   ; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c34]                   ; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4

[c3a]                   ; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[c43]                   ; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5

[c4a]                   ; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

[caa]                   ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15

; The following are multiport configs for DigiBoard (dgxx)
; and Comtrol (cmxx) multiport boards
; Section name format means:
; Char 1,2 = manufacturer abbreviation
; Char 3   = config number, a = no idea, use base setting

[cm1]
ConfigPriority=HARDRECONFIG
IOConfig=7@240-27E%3F8(3FF::)
IOConfig=247-247(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm2]
ConfigPriority=HARDRECONFIG
IOConfig=7@280-2BE%3F8(3FF::)
IOConfig=287-287(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm3]
ConfigPriority=HARDRECONFIG
IOConfig=7@500-5BE%FF8(3FF::)
IOConfig=507-507(FFF::)
IRQConfig=S:2,3,4,5,7,10,11

[cm4]
ConfigPriority=HARDRECONFIG
IOConfig=7@580-5BE%FF8(3FF::)
IOConfig=587-587(3FF::)
IRQConfig=S:2,3,4,5,7,10,11

[cma]
ConfigPriority=HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::)     ; How about here?
IRQConfig=S:2,3,4,5,7,10,11

[dg1]
ConfigPriority=HARDRECONFIG
IOConfig=7@100-17E%3F8(3FF::)
IOConfig=140-140(3FF::)
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15

[dga]
ConfigPriority=HARDRECONFIG
IOConfig=7@100-3FF%3F8(3FF::) ; I suspect we still need alignment here?
IOConfig=1@100-3FF(3FF::)     ; How about here?
IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15

; End COM port LogConfig sections



[ComPort.PosDup]
*PNP0500,*PNP0501,*PNP0502

[DevMap.AddReg]
HKLM,hardware\devicemap\serialcomm,COM1,,COM1
HKLM,hardware\devicemap\serialcomm,COM2,,COM2


; "NoDrv" section: We do not yet support these port devices.
;----------------------------------------------------------
[NoDrv]

; "Non-port" sections: PCMCIA cards that look like COM
; ports, but aren't (excluding modems).
;----------------------------------------------------------
[NonPort]
CopyFiles=NonPort.Copy
AddReg=NonPort.AddReg

[NonPort.Copy]
serial.vxd

[NonPort.AddReg]
HKR,,PortSubClass,1,01
HKR,,DevLoader,,*vcomm
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

[NonPort.NT]
;
; BUGBUG--Unclear whether these devices are presently supported under NT.  For now, leave a blank
; install section so we won't run the Win9x stuff.  The fact that no function driver will be installed
; for this devnode will cause the installation to fail, which is what we want to have happen for now.
;

[Det.DevINFs]
*pnp8215=netxir.inf     ;Xircom PE3
*pnpa01e=scsi.inf       ;Trantor T338
*pnpa01f=scsi.inf       ;Trantor T348
*pnpa02f=scsi.inf       ;Trantor T358

; User readable strings
;----------------------------------------------------------
[Strings]
MS  = "Microsoft"
Std = "(Standard port types)"
PortsClassName = "Ports (COM & LPT)"

*PNP0400.DeviceDesc = "Printer Port"
*PNP0401.DeviceDesc = "ECP Printer Port"
*PNP0500.DeviceDesc = "Communications Port"
*PNP0501.DeviceDesc = "Communications Port"
*PNP0502.DeviceDesc = "Multiport Communications Port"


Socket="Socket Communications"
Socket-56B5.DeviceDesc="Socket Serial HS IO PC Card"
Socket-8573.DeviceDesc="Socket Serial IO PC Card"
Socket-0854.DeviceDesc="Socket Collection I/O PC Card"
Socket-B6C6.DeviceDesc="Socket Collection I/O CF+ Card"
Socket-201E.DeviceDesc="Socket CF+ Bar Code Wand"
Socket-6BA6.DeviceDesc="Socket CF+ Serial Port"
Socket-EF12.DeviceDesc="Socket CF+ Serial Port"
Socket-310C.DeviceDesc="Socket LS2104 Laser Scanner Card"
Socket-363E.DeviceDesc="Socket LS4004 Laser Scanner Card"
Socket-9BEE.DeviceDesc="Socket Digital Phone Card"
Socket-30AD.DeviceDesc="Socket Digital Phone Card"
Socket-DCC2.DeviceDesc="Socket Serial HS IO PC Card"
Socket-8264.DeviceDesc="Socket Digital Phone Card"
Socket-B68E.DeviceDesc="Socket InHand Scanner Card"
Socket-E64F.DeviceDesc="Socket Digital Phone Card Nokia 6185"
Socket-F8F6.DeviceDesc="Socket Digital Phone Card"


Parport.SVCDESC  = "Parallel port driver"
Parallel.SVCDESC = "Parallel class driver"
Serial.SVCDESC   = "Serial port driver"

Serenum.SVCDESC = "Serenum Filter Driver"
server: ftp, load: 0.56