1. v5091.exe Driver
2. ABVPN2KP.INF File Contents

ABVPN2KP.INF Driver File Contents (v5091.exe)

; -- ABVPN2KP.INF --
;
; AT&T IPSec Protocol INF
;
; Copyright (c) 1999-2002, AT&T Labs
;

[Version]
Signature   = "$Windows NT$"
Class       = NetService
ClassGUID   = {4D36E974-E325-11CE-BFC1-08002BE10318}
Provider    = %ATT%
DriverVer   = 03/18/2002,5.05

[Manufacturer]
%ATT% = ATT

[ControlFlags]

[ATT]
%ABVPN2K_Desc% = ABVPN2K.ndi, att_abvpn2k

[ABVPN2K.ndi]
AddReg = ABVPN2K.ndi.AddReg, ABVPN2K.AddReg
; Note:
; 1. The NCF_* flags are defined in netcfgx.h
; 2. NCF_HAS_UI (0x80) is required only if the filter has a Notify object
;    and it supports custom property pages.
Characteristics = 0x410 ; !NCF_HAS_UI (0x80) | NCF_FILTER | NCF_NO_SERVICE !!--Filter Specific--!!
CopyFiles       = ABVPN2K.CopyFiles.Init, ABVPN2K.CopyFiles.Sys, ABVPN2K.CopyFiles.Inf

; ----------------------------------------------------------------------
; File copy
;
[SourceDisksNames]
1="ATT ABVPN2K IPSEC Driver Disk","",,

[SourceDisksFiles]
;abvpn2k.dll=1
;abvpn2k.sys=1
abvpn2km.inf=1

[DestinationDirs]
DefaultDestDir = 12
ABVPN2K.CopyFiles.Init  = 11   ; %windir%\System32
ABVPN2K.CopyFiles.Sys   = 12   ; %windir%\System32\drivers
ABVPN2K.CopyFiles.Inf   = 17   ; %windir%\inf

; Copying of abvpn2k.dll is required only if the filter has a Notify object
[ABVPN2K.CopyFiles.Init]
;abvpn2k.dll,,,2

[ABVPN2K.CopyFiles.Sys]
;copy done in wise
;abvpn2k.sys,,,2

[ABVPN2K.CopyFiles.Inf]
abvpn2km.inf,,,2

; ----------------------------------------------------------------------
; Filter Install
;
[ABVPN2K.ndi.AddReg]
HKR, Ndi, HelpText, , %ABVPN2K_HELP%

; ----------------------------------------------------------------------
; Keys required if a Notify object is present
; These keys should be omitted if the Filter does not have any Notify object
;
; Note:
; 1. Only include the following lines if your filter has configuration UI
;    that needs to be displayed.  Otherwise, you should not need a notify
;    object.
; 2. If you write your own notifyobject, use a different GUID for ClsID!!
;    (Generate this with uuidgen.exe)
;
;HKR, Ndi, ClsID,        , {df2e4f67-e93a-11d1-bb14-0000f8779051}
;HKR, Ndi, ComponentDll, , "abvpn2k.dll"

; ----------------------------------------------------------------------
; !!--Filter Specific--!!
;
; Note:
; 1. Other components may also have UpperRange/LowerRange but for filters
;    the value of both of them must be noupper/nolower
; 2. The value FilterClass is required.
; 3. The value Service is required
; 4. FilterDeviceInfId is the InfId of the filter device (miniport) that will
;    be installed for each filtered adapter.
;    In this case this is ms_sfiltermp (refer to netsf_m.inf)
;
HKR, Ndi,            FilterClass,         , failover
HKR, Ndi,            FilterDeviceInfFile, , abvpn2km.inf
HKR, Ndi,            FilterDeviceInfId,   , att_abvpn2kmp
HKR, Ndi,            Service,             , ABVPN2K
HKR, Ndi\Interfaces, UpperRange,          , noupper
HKR, Ndi\Interfaces, LowerRange,          , nolower
HKR, Ndi\Interfaces, FilterMediaTypes,    , "wan, ethernet, tokenring"
; 
; based on netpschd.inf, i'm hoping that this will keep our filter driver
; from seeing netbui traffic, but will allow us to see dial-up traffic
;   
HKR, Ndi\Interfaces, LowerExclude,        , "ndisatm, ndiscowan, ndiswan, ndiswanasync, ndiswanipx, ndiswannbf"


; ndis5     - only binds the filter to the network adapter
; ethernet  - only binds the filter to the ethernet adapter
; toeknring - only bind the filter to the tokenring adapter
; original  - HKR, Ndi\Interfaces, FilterMediaTypes,    , "ethernet, tokenring, FDDI"

[ABVPN2K.AddReg]
; The following key is Required
; The following key is filter driver specific
HKR, Parameters, Param1, 0, 4

[ABVPN2K.Ndi.Remove.Services]
DelService = ABVPN2K

; ----------------------------------------------------------------------
[Strings]
ATT          = "AT&T Labs"
ABVPN2K_Desc = "Net Firewall"
ABVPN2K_HELP = "Provides a secure connection through the Internet"