UDMA100C.txt Driver File Contents (ata245.zip)

UDMA UDMA33/66/100 change Utility for HN14L/PB16 series.
File name:udma100c.exe

0) Copy the udma100c.exe file to MS-DOS FDD.
1) Connect target drive to ATA bus.
2) Turn on drive power and PC by MS-DOS FDD.
3) To start this tool, type following filename at command prompt.
     A:\> UDMA100C 33  (for UDMA33 mode setting)
         or
     A:\> UDMA100C 66  (for UDMA66 mode setting)
         or
     A:\> UDMA100C 100 (for Ultra DMA100 mode setting)

New setting will be valid after power off -> on.


//////////////////////////////////////////////////////////////////////
//                                                                  //
//   UDMA Support Level Revising Utility for fujitsu drive.         //
//        PB16/HN14L Series - UDMA100 supported drive Only.         //
//        Firmware Development, IDE1 project. H.Iima                //
//        Copyright(C) FUJITSU Ltd. 1999-2000, All rights reserved. //
//                                                                  //
//////////////////////////////////////////////////////////////////////

Version 1.17 Feb 06, 2001

Usage : UDMA100C [33 or 66 or 100]
        Option: [/Master or /Slave], [/PRI or /SEC]
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.32