***************************************************************************** * * * ISA PnP Ethernet Adapter * * * * NDIS Driver for Windows NT v3.51 * * * ***************************************************************************** Contents of the Subdirectory: ============================= PNPWNT.SYS The NDIS3 driver for Windows NT. PNPWNT.HLP The help file. OEMSETUP.INF The setup information file. WINNT351.TXT This file. Installation: ============= Before starting with the installation process, make sure that the adapter is properly installed and configured. 1. Open "Control Panel" -> "Networks",and choose the "Add Adapter" button. The Add Noetwork Adapter dialog box appears. Select "<other> Requires disk from manufacturer" in the list of Network Adapters, and then press <Enter>. 2. Insert the driver diskette into your floppy drive, and specify the path of the driver in the diskette(i.e. A:\WINNT351) if necessary. 3. Select "ISA Plug & Play Ethernet Adapter", and start to copy the driver files to your system. 4. After all the driver files have been copy to your system, a property dialog box appear in the screen. You can enable the specail properties if you want to.Please refer to the next section to setup the properties. 5. When the driver installation is completed, restart your PC. Configuration Parameters: ========================= Configuration: -------------- 1) Open "Control Panel" -> "Networks", Press "Configure.." in the Netork Settings dialog box, and a property dialog box appear in the screen. 2) You will see the following properties: EarlyReceive,EarlyTransmit,FullDuplex, and PNPID. Turn the properties on if you want to enable the functions. Custom Keywords: ---------------- PNPID = hhhhhhhhhhhh This keyword is the Ethernet Address of the adapter you want to drive. If there are more than one ethernet adapters in your system , you have to use this keyword to let driver locate the right adapter. However, you don't have to use this keyword or let the value to be zero (i.e. PNPID = 0) if there is only one adapter in your system. EARLYTRANSMIT This keyword is used to enable turbo transmission mode for accelerating data transmission. EARLYRECEIVE This keyword is used to enable turbo receiption mode for accelerating data receiption. FULLDUPLEX This keyword is used to enable full duplex mode.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.