README.TXT 1. HOW CAN UPDATE BIOS ? STEP 1 : Make a Boot Diskette , You Can Download Awdflash.exe and BIOS (*.BIN) File To Diskette From Website STEP 2 : Boot From Diskette , Run Awdflash.exe file Update Your Mother Board BIOS Device=Awdflash [driver:] [path] [filename (*.bin)] /SN /PY /CC /R Example : Awdflash a:\tx98-a22.bin /SN /PY /CC /R PS : /SN (No Save) , /PY (Program BIOS) , /CC (Clear CMOS) , /R (Restart) STEP 3 : Finish Auto Program BIOS , Going to "BIOS SETUP" , Select "LOAD SETUP DEFAULTS" , SAVE AND EXIT SETUP PS1 : If Appear Any Error Message , Please Check File is Ready or File Type Name is Right PS2 : You Can Use Awdflash /? Know How to Command HOW CAN SAVE BIOS ? STEP 1 : Run Awdflash.exe file Save You Mother Board BIOS Device=Awdflash (Type Awdflash) STEP 2 : When the " File Name to Program " Appear , Type " Enter " Key STEP 3 : When the Ask " Do you want to Save Bios (Y/N) " Appear Select " Yes " STEP 4 : When the " File Name to Save " Appear , Type You Want Save Name Example : File Name to Save : a:\tx98-a22.bin (If You Want Save to A Disk , *.bin File)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.