Adjustment Programm for C17-2
===================================
1. Introduction
Analog flat screen monitors such as the C17-2 must be adapted to the
screen controller for each used screen resolution and refresh rate.
The program LCDADJ.EXE generates the test pattern required for precise
calibration.
2. Preparation
Select the screen mode to adjust (e.g. under Windows 9x via
Start - Settings - Control Panel - Display - Settings).
Further information is provided in the operating manual of the monitor.
Allow the unit to warm up for approx.. 20 minutes prior to calibration.
3. Installation of the driver
Plug & Play operating systems (Windows 9x / ME / 2000 and XP) ask for a
driver after connecting the flat screen monitor to the PC and reboot.
Please follow the instructions of the operating system. On other
operating systems please select the screen mode manually.
The optimal resolution for this screen is 1280x1024 and the optimal
refresh rate is 60Hz.
4. Calibration
Start the program LCDADJ.EXE.
The auto adjustment could be performed by the AUTO button. In most cases
the result of the auto adjustment is OK.
It is also recommended that the OSD function AUTO LEVEL is performed
in order to achive the optimum contrast setting.
In seldom cases it is necessary to optimize the image manually and sometimes
a vertical refresh rate higher than 60 Hz would improve the picture.
5. Any problem or other question you need clarified?
Please contact one of our IT Service Shops or your local sales partner
or office for advice.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.