Jan. 1996
DE-620 Ethernet Card
Packet Driver Installation for D-Link's TCP/IP
==============================================
Copyright (c) 1995 by D-Link Corporation. All rights reserved.
****************************************
* Packet Driver Program for D-Link TCP *
****************************************
There are two methods of running the D-Link's TCP/IP program. They are
described below.
METHOD 1:
If you are using the DE620PD.SYS program, the following statement must be
included in your CONFIG.SYS file:
DEVICE = DE620PD.SYS <packet_int_no>
You can place this line anywhere in the CONFIG.SYS file.
METHOD 2:
If you are using the DE620PD.COM program, follow these steps:
1. Modify your AUTOEXEC.BAT file to include the following line:
set HOSTS=<PATH>
<PATH> here is the directory where the D-Link TCP/IP programs reside.
2. Execute DE620PD.COM by typing the following:
>DE620PD <packet_int_no>
3. Execute TCPSTART.EXE to start TCP/IP.
You are now ready to use TCP/IP.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.