MP3-Go Host S/W V2.03 ReadMe ========================= Release: V2.03.00 OS Versions ----------- SoulMate Parallel port now supported for Windows 95/98/NT 4/2000. SoulMate & MusicStore USB Windows 98/2000 only. Auto Installation (Recommended) ----------------- N.B. USB devices should not be plugged in before stage 4). If one is: carry out manual installation (below) or 'Cancel' and unplug it. 1) Place CD in drive. 2) Allow to auto-boot (or run 'setup.exe' from CD root directory if auto_boot disabled). 3) Follow on screen instructions. 4) When installation finished plug in USB docking station or MusicStore (USB socket). 5) Wait for Windows to install USB drivers (Guide Windows to CD when asked where files are.). Manual Installation ------------------- Guide Windows to CD whenever you are asked where files are. 1) Plug in USB docking station. 2) Install driver mcld0101.sys (SoulMate only) with inf file using 'Have Disk' or whatever. 3) Install driver SM_USB.sys with inf file using 'Have Disk' or whatever. Re-installation --------------- This should not cause any problems. Driver change will not take effect while the h/w is plugged in, unless the PC is rebooted. Installing over a newer version is not recommended! Configuration ------------- This version is configured to work with either USB or LPT (giving preference to former). If this 'Either' mode causes trouble the mode should be changed using smconfig.exe (available as 'Start Menu/Programs/SoulMate/Configure'). N.B. Once a USB device has been detected the s/w will not look for a LPT one, until MusicMatch is closed and re-run.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.