(C)Copyright 2003 Marvell(R). All rights reserved =========================================================================== SetupVCTwin.txt created 19-Nov-2003 Readme File for SETUPVCTWIN.exe v1.04 Marvell Yukon Gigabit Ethernet Adapter Family This file contains 1 Overview 2 Required Files 3 Installation Instructions 4 Troubleshooting =========================================================== 1 Overview =========== The Virtual Cable Tester(TM) installation package contains the Marvell Virtual Cable Tester(TM) application. This README file explains how to install the Virtual Cable Tester(TM) Package on a machine running Windows 2000 or Windows XP. NOTE: The Marvell Virtual Cable Tester(TM) can only be used with Windows 2000 and Windows XP. 2 Required Files ================= To install the Marvell Virtual Cable Tester(TM), the following file is required: SetupVCTwin.exe 3 Installation Instructions ============================ NOTE: To install the Marvell Virtual Cable Tester(TM) make sure that you are logged in as a user with administrative rights. To install the Marvell Virtual Cable Tester(TM), proceed as follows: 1. Execute the setup file SetupVCTwin.exe . 2. Follow the instructions of the installation procedure. *** 4 Troubleshooting ================== If you should encounter any problems with your Marvell Virtual Cable Tester(TM) Package, please re-read the instructions above and the documentation supplied with the operating system carefully. Additionally refer to your system event log file (using the Event Viewer) and check it for entries from Marvell Virtual Cable Tester(TM). If your particular problem is not listed or the error persists, please send your system event log file or at least the event id number and the logging data (as WORDs) of the entries made by Marvell Virtual Cable Tester(TM) to our technical support. For further information please contact support. *** End of Readme File ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.