SiS900 Fast Ethernet Adapters Linux Driver Install Documentation Jun 6, 2002 **Before install this driver, you should make sure that your kernel had enable " SiS 900/7016 PCI Fast Ethernet Adapter support " ! This driver is for kernel RedHat kernel 2.4.x or 2.5.x. You can install this driver follow steps descributed below. In following case, we use kernel 2.4.19 for example 1> Copy sis900.c and sis900.h to /usr/src/2.4.19/drivers/net/ and replace old ones 2> Compile the driver module: [root@/usr/src/2.4.19]# make modules;make modules_install The binary will be installed as: /lib/modules/2.4.19/kernel/drivers/net/sis900.o 3> Reboot your computer 4> Install the module: [root@/lib/modules/2.4.19/kernel/drivers/net]# insmod sis900.o 5> Assign an IP address to the interface by entering the following, where <x> is interface number: ifconfig ethx <IP_address> 6> Verify that the interface works. Enter the following, where <IP_address> is the IP address for another machine on the same subnet as the interface that is being tested: ping <IP_address> Additional Configurations ========================= Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves adding an alias line to /etc/modules.conf as well as editing other system startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to your distribution documentation. If during this process you are asked for the driver or module name, the name for the Linux Driver for SiS Fast Ethernet adapters is sis900. 1> Modify the file "/etc/modules.conf" by entering the following, where <x> is interface number: alias ethx sis900 Then SiS900 driver will be loaded automaticallyDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.