mujdemo.ini Driver File Contents (Audio_2K_XP_041001.zip)

# Generated by UJ Circuit Analyzer
# Friday, September 19, 2003 - 1:53:14 PM
# StacSrv version 4167
# Driver version 4167
#
# RJL Modified - replaced driver settings from 4150h.  Changed R64 and R66 to 6 channel, no inputs.
#
[Models]
;all MODEL files (except perhaps STAC97.ini) should have a self-reference here.
;self-reference:
PCI\VEN_8086&DEV_24c5&subsys_58048384=this

[DelRegKeys]
# Specify the registry keys to be deleted during Uninstall
HKCU\Software\Sigmatel\Settings=Yes		; Delete the current user's settings subkey
HKCU\Software\Sigmatel\JackSense=Yes		; Delete the current user's jacksense subkey
HKCU\Software\Sigmatel\JackSense2=Yes		; Delete new user key
HKLM\Software\Sigmatel\JackSense2=Yes		; both of them
HKR\Settings=Yes		; Delete the driver's settings subkey
HKR\JackSense=Yes		; Delete the driver's jacksense subkey

# The following 2 keys cause the volume settings to be 'forgotten' during Uninstall
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio= Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio= Yes

[Apps]
# Specify the application software to install
TinyUJ2                   = No
SSWiz                     = YesInvisible
StacSysTray               = YesInvisible
StacIt                    = YesInvisible
PassThru                  = YesInvisible
SampleEQ                  = YesInvisible

# The following keys are used by StacSrv.application
[HKLM\Software\SigmaTel\Jacksense2]
RegistryVersionNum        = dword: 0x1		; Newer registry format based on jacks, not pins
PollingPeriod             = dword: 333		; 333 millliseconds
JSOscFreq                 = dword: 16000		; Set jacksense oscillator frequency to 16kHz
DockSupport               = dword: 0		; Bios Interface dock support

# Policies
PolicyHPMuteSpkrs         = dword: 0x1FF		; Plugging in any headphones mutes all speakers
#PolicyDefaultBassMgmt  = dword: 1         ; 1 = Enable 2.1 bass management at startup
#PolicyOnly1Input       = dword: 0x01ff    ; For multiple codecs
PolicySpkrMuteSpkrs       = dword: 0x8

# Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer
# The JackSense registry key "DigitalModel" should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01

DisableAnalogMixer        = dword: 1		; 1 = Dac A, 0 = mixer

# The following keys specify the number of different setups displayed
# by the Jack Sharing applet, and the mode that they support.  This will
# subsequently effect the menu item displayed by the Jack Sharing applet.
# Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1)

#    0 = None
#    1 = Mono Speaker
#    2 = Headphones
#    3 = Stereo Speakers (narrow)
#    4 = Stereo Speakers (wide)
#    5 = Quadraphonic (4 channel)
#    6 = Surround (4 channel)
#    7 = 5.1 Surround (6 channel)
#    All other values are invalid

NumSpkrSetups             = dword: 0x0		; The number of setups defined.

# The following sections define which pins are connected to jacks
# Each pin will have properties associated with it such as the color of the jack,
# where it is located, and which mode (front, rear, center/lfe) to select when a
# speaker is plugged in and autoconfigure is set.

# DefaultSpeakerMode specifies which channels to configure if JackSense is
#  active and AutoConfigure is set and speakers are plugged into the jack

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]          ;  0 : 0 - Rear Panel Gray
JackColor                 = dword: 8		;Gray
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 1		; 0
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 7		;Pins23/24
DefaultSpeakerMode        = dword: 6		;jsCenterLFE
PinConfiguration         = dword: 6		 ; jsCenterLFE
GpioSwitch                = dword: 5		;JackSwitch GPIO = GPIO V
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		; Non-Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x1F5		; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE - jsSpdifIn - jsSpdifOut
Notify                    = dword: 0x0b		; - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsSpdifIn - jsSpdifOut
AutoConfigure             = dword: 0x1E5		; - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsSpdifIn - jsSpdifOut
AutoConfigSupport         = dword: 0x1E5		; - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsSpdifIn - jsSpdifOut
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 10		;10
JSReadingsGood            = dword: 3		;3
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

# JackSense Calibration
;SpkrHi                    = dword: 63000
;SpkrLo                    = dword: 2501
;MicHi                     = dword: 2500
;MicLo                     = dword: 1001
;HPHi                      = dword: 1000
;HPLo                      = dword: 100

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]          ;  0 : 1 - Rear Panel White Jack
JackColor                 = dword: 9		;White
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 2		; 1
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 0		;Pins35/36
DefaultSpeakerMode        = dword: 5		;jsSurround
PinConfiguration         = dword: 5		 ; jsSurround
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		; Non-Inverted
MicBias                   = dword: 1		;Mic Bias GPIO = GPIO 1
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;True
MicBiasChargeDelay        = dword: 30000        ; 30 seconds
SupportedDevices          = dword: 0x7F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x01		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
AutoConfigure             = dword: 0x6F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
AutoConfigSupport         = dword: 0x6F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 10		;10
JSReadingsGood            = dword: 3		;3
# Items directly derived from schematic review
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

# JackSense Calibration
#SpkrHi                    = dword: 63000
#SpkrLo                    = dword: 18501
#MicHi                     = dword: 18500
#MicLo                     = dword: 501
#HPHi                      = dword: 300
#HPLo                      = dword: 100

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]          ;  0 : 2 - Rear Panel White Jack
JackColor                 = dword: 9		;White
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 3		; 2
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 1		;Pins39/41
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration         = dword: 2		 ; jsSpkr
GpioSwitch                = dword: 2		;JackSwitch GPIO = GPIO 2
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		; Non-Inverted
MicBias                   = dword: 0		;Mic Bias GPIO = GPIO 0
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;True
MicBiasChargeDelay        = dword: 30000        ; 30 seconds
SupportedDevices          = dword: 0x7F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x01		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
AutoConfigure             = dword: 0x6F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
AutoConfigSupport         = dword: 0x6F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 10		;10
JSReadingsGood            = dword: 3		;3
# Items directly derived from schematic review
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

# JackSense Calibration
#SpkrHi                    = dword: 63000
#SpkrLo                    = dword: 18501
#MicHi                     = dword: 18500
#MicLo                     = dword: 501
#HPHi                      = dword: 300
#HPLo                      = dword: 100


[HKR\Settings]

#
# The JackSense registry key “DigitalModel” should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01
# unless the DigitalMasterControlsAnalog setting is used

EmulateAllMasters	= hex: 1   ; Digital scaling of master volume

########################################################################
#The following key must be set = 1 when SPDIF support is implemented, and digitalmodel goes away!!!!!!!!!!!
########################################################################

DigitalMasterControlsAnalog = hex: 0   ; can be used along with EmulateAllMasters set to 1
                                       ; DigitalModel must be set to 0 for this to work
#
# EnableLinearVolumes can be used to make the volume curve linear. 
# This affects all analog controls exposed by the driver. ( Needs testing - 07-12-2003 )

EnableLinearVolumes         = hex: 0   ; linear volumes like Sony wants

#note: the following two settings have no effect unless the EnableSPDIFIn key (next section) is set true
SPDIFInSupportVariant		=hex: 2
SPDIFInMute			=hex: 1 ; muted

#
# This section disables sliders in both playback and record panels
#

EnableSPDIFIn             = hex: 1        ; creates analog source ( Video In volume register )
DisableHeadphone          = hex: 1        ; normally disabled
DisableLnlvl              = hex: 1        ; normally disabled
DisableWaveIn2            = hex: 1        ; normally disabled
DisablePCBeep             = hex: 1        ; normally disabled
DisablePhone              = hex: 1        ; only enabled if there is an analog connection to modem
DisableMonoOut            = hex: 1        ; only enabled if there is an analog connection to modem
DisableAux                = hex: 1        ; normally disabled
DisableVideo              = hex: 1        ; normally disabled
Disable3DControl          = hex: 1        ; normally disabled
DisableMonoVirtual        = hex: 1        ; normally disabled
DisableMICSelect          = hex: 1
DisableLineInFromPlayback = hex: 1        ; but leaves it at the recording MUX
DisableMicFromPlayback    = hex: 1        ; but leaves it at the recording MUX
DisablePeakmeters         = hex: 1
PCMVolumeFixedLevel       = hex: 08, 08   ; only meaningful in analog or DigitalMasterControlsAnalog mode

#
# This section sets initial volume levels
#

MICBoost           = hex: 1               ; normally set to 1
WaveInMux          = hex: 00, 00, 00, 00  ; normally Mic
MasterControlsAux  = hex: 1               ; normally disabled for STAC9758
MasterControlsMono = hex: 1               ; normally disabled for STAC9758
RecMuxMuteAtFloor  = hex: 0               ; don't mute rec gain, even at bottom of slider
MICSelect          = hex: 0               ; Mic1 Or Mic2
MICAtRecMuxVolume  = hex: 63, D0, 13, 00  ; (0-168000)
;MICAtRecMuxVolume = hex: 00, 30, 10, 00
MICVolume          = hex: 90, 56, 08, 00  ; (ffdd8000-c0000), (5 bit control).
CDVolume           = hex: 89, F5, FF, FF  ; (ffdd8000-c0000), (5 bit controls).
;CDVolume          = hex: 00, F0, E9, FF
3DDepthEnable      = hex: 0               ; avoid using 3D if possible
PCBeepMute         = hex: 1               ; mute pc beep as default
PhoneMute          = hex: 1               ; mute phone as default
CDMute             = hex: 1               ; mute CD as default
VideoMute          = hex: 1               ; mute video as default
AuxMute            = hex: 1               ; mute aux as default

# EnableExtAmpControl should be set to (binary) 00 or, better yet, 
# excluded from .ini’s for models that implement either SPDIF-in, 
# or StacSrv control of EAPD during JackSense cycles. This setting,
# enabled in several .ini’s I looked at, stands to cause a direct resource
# conflict, as it surely arbitrates codec R74’s state.
#

EnableExtAmpControl          = hex: 0          ; external amp is controlled by a GPIO or EAPD
ExtAmpPops                   = hex: 1          ; tells the driver that the amp pops
ExtAmpPowerUpOnSystemSuspend = hex: 1          ; keep external amp alive in S1
ExtAmpPowerDownTimeInMCS     = dword: 5000     ; wait 5 milliseconds after powering down amp
ExtAmpPowerUpTimeInMCS       = dword: 5000     ; wait 5 milliseconds before powering up amp
CodecPowerUpDelayInMCS       = dword: 1000     ; wait 1 millisecond before powering up codec

#
# Other settings
#
EnableVrefPowerDown          = hex: 1
VrefPowerDownTimeInMS        = dword: 500 ; 1/2 second
EnableNonPCMOnWin2K          = hex: 1
EnableStereoMic              = hex: 1
MultichannelEnabledByUser           = hex: 1
EnableNewVolumeControls      = hex: 1
CPL_SpdifTransmitterEnabledByUser = hex: 0
DisableCDIn			=hex: 1 ;When DisableCDIn=0 (analog CD enabled), CDMute must = 0; When DisableCDIn=1 (analog CD diabled), CDMute should = 1

#
# These settings control the values loaded into the AC97 registers by the driver.
# This allows setting the configuration prior to any applets running.
#
#
# _R64 (etc.) settings *cannot* be carried-over from an arbitrary, model-.ini. 
# These are system specific, hardware-dependant settings that configure a system to a known 
# initial state, independent of StacApp/StacSrv.

0_76588384_R64		=hex: e0, 92	; Was 1c08 in 4150h
0_76588384_R66		=hex: 06, 06	; Was 0305 in 4150h
0_76588384_R68		=hex: 00, 60	; Was 6008 which set DacBSwap.
0_76588384_R6E		=hex: 40, 90
0_76588384_R74		=hex: 00, 00

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.20