dcx12.ini Driver File Contents (Audio_2K_XP_041001.zip)

# Generated by UJ Circuit Analyzer
# Wednesday, November 05, 2003 - 2:22:26 PM
# StacSrv version 4184
# Driver version 4184
#
# 1/19/04 RJL - Hand configured to include DaisyChain, Hidden internal jacks, and Mic priority
# 1/25/04 RJL - Configure Jack5 MB to match J1 MB.  Set mode=0x0f.
#
[Models]
PCI\VEN_8086&DEV_24c5&subsys_001814C0=this

[DelRegKeys]          

HKCU\Software\Sigmatel\Settings=Yes
HKCU\Software\Sigmatel\JackSense=Yes
HKCU\Software\Sigmatel\JackSense2=Yes
HKLM\Software\Sigmatel\JackSense2=Yes
HKR\Settings=Yes
HKR\JackSense=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes

[Apps]          

TinyUJ2                   = No
SSWiz                     = No
StacSysTray               = YesInvisible
StacIt                    = YesInvisible
StacCtrl		  = YesInvisible
PassThru                  = No

[HKLM\Software\SigmaTel\Jacksense2]          

RegistryVersionNum        = dword: 0x1
PollingPeriod             = dword: 333
JSOscFreq                 = dword: 16000
DockSupport               = dword: 0		
PolicyHPMuteSpkrs         = dword: 0xb
PolicySpkrMuteSpkrs       = dword: 0x8
PolicyMicInsertSelect	  = dword: 1
DisableAnalogMixer        = dword: 1
NumSpkrSetups             = dword: 0x0
Mode                      = dword: 0x1f


################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]       ;  0 : 0 - Front Panel Black Jack (Daisy chained)?
JackColor                 = dword: 0		;Black
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 1		;0
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 1		;Pins39/41
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 0		;jsPwrSpkr
GpioSwitch                = dword: 2		;JackSwitch GPIO = GPIO 2
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		;Inverted
MicBias                   = dword: 0		;Mic Bias GPIO = GPIO 0
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;Normal
SupportedDevices          = dword: 0x1F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
AutoConfigure             = dword: 0xF		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
AutoConfigSupport         = dword: 0xF		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
MicLo                    = dword: 1200          ; Set Mic to detect any non-HP impedance
MicHi                    = dword: 64999
SpkrLo                   = dword: 65000
SpkrHi                   = dword: 65001
DaisyChain                = dword: 0		;Direct to Pin
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: -1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: -1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]       ;  0 : 1 - Front Panel Black Jack (not daisy chained?)
JackColor                 = dword: 0		;Black
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 2		;1
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 0		;Pins35/36
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 0		;jsPwrSpkr
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		;Inverted
MicBias                   = dword: 1		;Mic Bias GPIO = GPIO 1
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;Normal
SupportedDevices          = dword: 0x1F		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
AutoConfigure             = dword: 0xF		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
AutoConfigSupport         = dword: 0xF		; - jsNone - jsMic - jsPwrSpkr - jsHeadphone
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
MicLo                    = dword: 1200           ; Set Mic to detect any non-HP impedance
MicHi                    = dword: 64999
SpkrLo                   = dword: 65000
SpkrHi                   = dword: 65001
DaisyChain                = dword: -1		; No daisy chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]       ;0 : 2 - Front Panel Blue Jack (Internal mic)
bHidden			  = dword: 1		;Hide jack in StacIt
lPriority		  = dword: 0		;default mic, low priority
JackColor                 = dword: 6		;Blue
JackLocation              = dword: 2		;Motherboard/Internal
JackPanelOrder            = dword: 3		; 2
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 5		;Pins21/22
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 1		;jsMic
GpioSwitch                = dword: -1		;JackSwitch GPIO = gpioUnassociated
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 1		;gpioUnassociated
MicBias                   = dword: -1		;Mic Bias GPIO = 5 = GPIO V; this is currently broken in stacsrv
MicBiasMode               = dword: 0		;2 = Hardwired
MicBiasPolarity           = dword: 0		;
SupportedDevices          = dword: 0x2		; - jsMic
Notify                    = dword: 0x0		; - jsbmAllOff
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 0		;0.33 uF
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]       ;  0 : 3 - Internal Amp
JackColor                 = dword: 0		;Black
JackLocation              = dword: 2		;Internal Amp
JackPanelOrder            = dword: 4		;3
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 7		;Pins23/24
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 2		;jsPwrSpkr
GpioSwitch                = dword: -1		;JackSwitch GPIO = gpioUnassociated
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0x1		;gpioUnassociated
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x4		; - jsSpeaker
Notify                    = dword: 0x0		; - jsbmAllOff
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 0		;0.33 uF
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True


#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack5]       ; Dock headphone jack (Daisy chained)
bHidden			  = dword: 1		;Hide jack in StacIt
JackColor                 = dword: 0		;Black
JackLocation              = dword: 0		;Rear Panel (s/b Dock = 3)
JackPanelOrder            = dword: 1		;0
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 1		;Pins39/41
MicBias                   = dword: 0		;Mic Bias GPIO = same as Jack1 (daisychain)
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;Normal
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 3            ;jsHeadphone
GpioSwitch                = dword: 4		;JackSwitch GPIO = GPIO E
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 1            ; Inverted
SupportedDevices          = dword: 0x8		; - jsHeadphone
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: 1		; 2nd Jack in Daisy Chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack6]       ; Dock Mic Jack
bHidden			  = dword: 1		;Hide jack in StacIt
JackColor                 = dword: 0		;Black
JackLocation              = dword: 0		;Rear panel (s/b Dock = 3)
JackPanelOrder            = dword: 2		;1
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 6		;Pins16/17
;lPriority		  = dword: 1		;default mic
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 1            ; Mic
GpioSwitch                = dword: 5		;JackSwitch GPIO = GPIO V
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 1            ; Inverted
SupportedDevices          = dword: 0x2		; - jsMic
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff


[HKR\Settings]

EmulateAllMasters         = hex: 1
DigitalMasterControlsAnalog = hex: 1
DockedIfJustCodecReady    = hex: 0
EnableLinearVolumes       = hex: 0
MakeCodecsPlayInParallel  = hex: 0
DisableCDIn               = hex: 1
MuteInactiveDac           = hex: 0
SPDIFInMute               = hex: 0
SPDIFInSharesJackWithAnalogIn = hex: 0
DisableHeadphone          = hex: 1
DisableLnlvl              = hex: 1
DisableWaveIn2            = hex: 1
DisablePCBeep             = hex: 0
DisablePhone              = hex: 0
SPDIFInSupportVariant     = hex: 0
DisableMonoOut            = hex: 1
DisableAux                = hex: 1
DisableVideo              = hex: 1
Disable3DControl          = hex: 1
DisableMonoVirtual        = hex: 1
DisableMICSelect          = hex: 1
DisableLineInFromPlayback = hex: 1
DisableMicFromPlayback    = hex: 1
DisablePeakmeters         = hex: 1
EnableSPDIFIn             = hex: 0
MICBoost                  = hex: 1
MasterControlsAux         = hex: 0
MasterControlsMono        = hex: 0
RecMuxMuteAtFloor         = hex: 0
MICSelect                 = hex: 0
3DDepthEnable             = hex: 0
PCBeepMute                = hex: 1
PhoneMute                 = hex: 1
CDMute                    = hex: 1
VideoMute                 = hex: 1
AuxMute                   = hex: 1
EnableExtAmpControl       = hex: 0
EnableNonPCMOnWin2K       = hex: 1
EnableStereoMic           = hex: 1
MultiChannelEnable        = hex: 0
EnableNewVolumeControls   = hex: 1
DisableStereoVirtual      = hex: 1
DisableMono2Virtual       = hex: 0
DisableStereo2Virtual     = hex: 0

SPDIFOutputDisable 	  = hex: 1
DisableSPDIFControl 	  = hex: 1
MultiChannelDisable	  = hex: 1

0_76588384_R64	=hex:42, 70
0_76588384_R66	=hex:00, 00
;0_76588384_R68	=hex:52, 60
;0_76588384_R3E	=hex:00, 00
;0_76588384_R4C	=hex:0c, 00
;0_76588384_R4E	=hex:ff, ff
;0_76588384_R54	=hex:02, 00

;out-comment EAPD 0_key when daisy chain support is added
####
0_76588384_R74  =hex:00, 80		; EAPD
####

;0_76588384_R6E  =hex:00, 90		; VrefOUt @ .88 AVDD; slots 3/4


;BiosInterfaceAddress      = dword: 0x0		; address in physical memory
;BiosInterfaceAddressEnd   = dword: 0x0		; address in physical memory


WaveInMux           	   =hex: 00, 00, 00, 00
MICAtRecMuxVolume         = hex: 63, D0, 13, 00		; (0-168000)
MICVolume                 = hex: 90, 56, 08, 00		; (ffdd8000-c0000), (5 bit control).
CDVolume                  = hex: 89, F5, FF, FF		; (ffdd8000-c0000), (5 bit controls).
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.07