d1875.ini Driver File Contents (Audio_2K_XP_041001.zip)

# Generated by UJ Circuit Analyzer
# Dienstag, 24. Februar 2004 - 13:54:36
[Models]
PCI\VEN_1039&DEV_7012&SUBSYS_105E1734 = this

[DelRegKeys]

HKCU\Software\Sigmatel\Settings=Yes
HKCU\Software\Sigmatel\JackSense=Yes
HKCU\Software\Sigmatel\JackSense2=Yes
HKLM\Software\Sigmatel\JackSense2=Yes
HKR\Settings=Yes
HKR\JackSense=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes

[Apps]

TinyUJ2                   = YesInvisible
SSWiz                     = No
StacSysTray               = No
StacIt                    = No
PassThru                  = No

[HKLM\Software\SigmaTel\Jacksense2]

RegistryVersionNum        = dword: 0x1
PollingPeriod             = dword: 333
JSOscFreq                 = dword: 16000
DockSupport               = dword: 0
DisableAnalogMixer        = dword: 0

NumSpkrSetups             = dword: 0x4		; The number of setups defined.
SpkrSetup1                = dword: 0x2		; Setup 1 is mode 2 (Headphones)
SpkrSetup2                = dword: 0x4		; Setup 2 is mode 4 (Speakers)
SpkrSetup3                = dword: 0x5		; Setup 3 is Quad
SpkrSetup4                = dword: 0x7		; Setup 4 is mode 7 (5.1)
AlternateDeviceEnable     = dword: 2		; Enable alternate Mic
AlternateDeviceSelected   = dword: 2		;   and select it

#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]

JackColor                 = dword: 6		;Blue
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 0		; 0
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 7		;Pins23/24
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
DefaultSpeakerMode        = dword: 5		;jsSurround
PinConfiguration          = dword: 4		;Line In as default
GpioSwitch                = dword: 1		;JackSwitch GPIO = GPIO 1
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0
SupportedDevices          = dword: 0x75		; - jsLineIn - jsSurround 
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

Setup1                    = dword: 0x4		; In setup 1 this jack is LineIn
Setup2                    = dword: 0x4		; In setup 2 this jack is LineIn also
Setup3                    = dword: 0x5		; In setup 3 this jack is Rear
Setup4                    = dword: 0x5		; In setup 4 this jack is Rear also

#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]

JackColor                 = dword: 5		;Green
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 1		; 1
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 0		;Pins35/36
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
DefaultSpeakerMode        = dword: 3		;jsHeadphone
PinConfiguration          = dword: 2		;LineOut as default
GpioSwitch                = dword: 0		;JackSwitch GPIO = GPIO 0
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0
SupportedDevices          = dword: 0x7D		; - jsHeadphone  - jsPwrSpkr
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: 0		;Will act like first jack from codec pin
OutputCapSize             = dword: 4		;330 uF
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: -1		;True
SameCapOnBothChannels     = dword: 1		;True

Setup1                    = dword: 0x3		; In setup 1 this jack is Headphone
Setup2                    = dword: 0x2		; In setup 2 this jack is LineOut
Setup3                    = dword: 0x2		; In setup 3 this jack is Front
Setup4                    = dword: 0x2		; In setup 4 this jack is Front also

#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]

JackColor                 = dword: 2		;Pink
JackLocation              = dword: 0		;Rear Panel
JackPanelOrder            = dword: 2		; 2
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 5		;Pins21/22
MicBias                   = dword: 2		;Mic Bias GPIO = GPIO 2
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;Normal
DefaultSpeakerMode        = dword: 6		;jsCenterLFE
PinConfiguration          = dword: 1		;MIC as default
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0
SupportedDevices          = dword: 0x77		; - jsMic  - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

Setup1                    = dword: 0x1		; In setup 1 this jack is Mic
Setup2                    = dword: 0x1		; In setup 2 this jack is Mic also
Setup3                    = dword: 0x1		; In setup 3 this jack is Mic also
Setup4                    = dword: 0x6		; In setup 4 this jack is C/LFE

#########################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]

JackColor                 = dword: 2		;Pink
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 4
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 6		;Pins16/17
PinConfiguration          = dword: 1		; Mic
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
bHidden                   = dword: 1
SupportedDevices          = dword: 0x2		;Mic
#Dedicated Mic
AlternateDevice           = dword: 2		; Alternate Mic
Setup1                    = dword: 0x1		; In setup 1 this jack is Mic
Setup2                    = dword: 0x1		; In setup 2 this jack is Mic
Setup3                    = dword: 0x1		; In setup 3 this jack is Mic
Setup4                    = dword: 0x1		; In setup 4 this jack is Mic

#########################################################################################
#[HKLM\Software\Sigmatel\JackSense2\Jack5]          

#JackColor                 = dword: 5		;Green
#JackLocation              = dword: 1		;Front Panel
#JackPanelOrder            = dword: 5
#ParentCodecIndex          = dword: 0		;0
#PinIndex                  = dword: 0		;Pins35/36
#MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
#MicBiasMode               = dword: 0		;Normal
#MicBiasPolarity           = dword: 0		;False
#DaisyChain                = dword: 1		;Will act like 2nd jack b/c has no detection switch
#bHidden		  = dword: 1
##Daisychained

[HKR\Settings]
MasterVolumeFixedLevel    = dword: 0x0
AuxVolumeFixedLevel       = dword: 0x0
MonoVolumeFixedLevel      = dword: 0x0
PCMVolumeFixedLevel       = dword: 0x808
EmulateAllMasters         = dword: 0x1
DisableMicFromPlayback    = hex: 0
DisableLineInFromPlayback = hex: 0
DisableVideoFromPlayback  = hex: 0
DisablePhoneFromPlayback  = hex: 0
MasterControlsAux         = dword: 0x1
MasterControlsMono        = dword: 0x1
MICBoost30dB              = hex: 0
EnableStereoMic           = hex: 1
0_76588384_R64            = dword: 0x0380
0_76588384_R66            = dword: 0x0200
0_76588384_R68            = dword: 0x2000
0_76588384_R74            = dword: 0x0
DisableMICSelect          = hex: 1
EnableNonPCMOnWin2K       = hex: 1
EnableVRA                 = hex: 0
MultiChannelDisable       = hex: 0
EnableExtAmpControl       = hex: 1
ExtAmpPowerDownTimeInMCS  = dword: 0x1388
ExtAmpPowerUpTimeInMCS    = dword: 0x1388
ExtAmpPowerUpOnSystemSuspend = hex: 1
EnableVrefPowerDown       = hex: 1
VrefPowerDownTimeInMS     = dword: 0x1F4
OverridePowerSupplyVoltageAutoDetect = dword: 0x0
PowerSupplyVoltageIs5V    = dword: 0x0
DisablePeakmeters         = hex: 1
DisableEQ                 = hex: 0
ExtAmpPops                = dword: 0x1
CPL_SaveExtraPower        = dword: 0x0
CPL_SecondsAfter          = dword: 0x1E
CPL_MaySwitchExtAmpPowerState = dword: 0x0
CPL_FixedDigitalOutRate   = dword: 0x0
EnableNewVolumeControls   = hex: 1
ConfigurableVolumeMax     = dword: 0x1
MasterOutVolumeMaxVol     = dword: 0x0
HPOutVolumeMaxVol         = dword: 0x0
PhoneVolumeMaxVol         = dword: 0x808
MICVolumeMaxVol           = dword: 0x0
LineInVolumeMaxVol        = dword: 0x0
CDVolumeMaxVol            = dword: 0x808
VideoVolumeMaxVol         = dword: 0x808
AuxVolumeMaxVol           = dword: 0x0
RecGainMinVol             = dword: 0x0
EnablePOPBypass           = hex: 0
EnableSPDIFIn             = hex: 1
SPDIFInSupportVariant     = dword: 0x2
DigitalMasterControlsAnalog = dword: 0x1
EnableLinearVolumes       = hex: 0
BiosInterfaceAddress      = dword: 0x0
BiosInterfaceAddressEnd   = dword: 0x0
EnableSubwooferAtMono     = hex: 0
EnableLevelShiftLock      = hex: 0
EnableAltMicSupport       = hex: 0
Mic1Selector              = dword: 0x1
Mic2Selector              = dword: 0x0
DisablePCBeep             = hex: 1
DisablePhone              = hex: 1
DisableMIC                = hex: 0
DisableLineIn             = hex: 0
DisableCDIn               = hex: 0
DisableVideo              = hex: 0
DisableAux                = hex: 0
Disable3DControl          = hex: 1
DisableStereoVirtual      = hex: 0
DisableMonoVirtual        = hex: 1
DisableStereo2Virtual     = hex: 0
DisableHeadphone          = hex: 1
DisableLnlvl              = hex: 1
DisableWaveIn2            = hex: 1
DisableMonoOut            = hex: 1
DisableSPDIFIn            = hex: 1
DisableSubwooferAtMono    = hex: 1
PCBeepVolume              = dword: 0x0
PCBeepMute                = hex: 1
PhoneVolume               = dword: 0x0
PhoneMute                 = hex: 1
MICSelect                 = dword: 0x0
MICBoost                  = hex: 1
MICVolume                 = dword: 0x60000
MICMute                   = hex: 1
LineInVolume              = dword: 0xFFF20547
LineInMute                = hex: 1
CDVolume                  = dword: 0xFFFA2000
CDMute                    = hex: 1
VideoMute                 = hex: 1
AuxVolume                 = dword: 0x60000
AuxMute                   = hex: 1
3DDepthEnable             = dword: 0x1
MasterVolume              = dword: 0xFFFA2000
MasterMute                = hex: 0
WaveInMux                 = dword: 0x0
MICAtRecMuxVolume         = dword: 0x100000
CDAtRecMuxVolume          = dword: 0x100000
AuxAtRecMuxVolume         = dword: 0xC0ADC
LineInAtRecMuxVolume      = dword: 0x27FFF
StereoMixAtRecMuxVolume   = dword: 0xE8A8C
MainMixer                 = dword: 0x0
PCBeepMixer               = dword: 0x0
CPL_SpdifTransmitterEnabledByUser = dword: 0x1
WaveOutPeakMeter          = dword: 0x0
RecordPeakMeter           = dword: 0x0
MonoMuteInMasterAdvancedDefault = dword: 0x0
SPDIFInAtRecMuxVolume     = dword: 0x0
SPDIFInVolume             = dword: 0x0
SPDIFInMute               = hex: 0
MICVolumeInc              = hex: 01,00,00,00
MICMuteInc                = hex: 01,00,00,00
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 4.40