1. Globetrotter.zip Driver
2. OptnGprsCard.inf File Contents

OptnGprsCard.inf Driver File Contents (Globetrotter.zip)

;GprsCard.INF
;
;OPTION GPRS PC card Modem
;
; Copyright (c) 2002 OPTION
;
;supported features:
; power management disabled (XP and 98)
; 2 seconds delay before start of configuration
; tone dialing only (no need for pulse dialing)
; detection of caller id
; link protocols analog transparent/non transparent, V.110 at 1200, 2400, 4800, 9600, 14400 bps


[Version]
Signature = "$Chicago$"
Class = Modem
ClassGUID = {4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider = %Option%
DriverVer = 12/05/2003, 1.0.5

[Manufacturer]
%Option% = OptionModels
%Vodafone% = VodafoneModels
%ChinaPutian% = ChinaPutianModels
%EE% = EEModels
%Panda% = PandaModels

[OptionModels]
%GprsCard% = GprsCard, "PCMCIA\Option_International-GSM/GPRS_GlobeTrotter-0013-0000"
%GprsCard% = GprsCard, "PCMCIA\Option-GSM/GPRS_GlobeTrotter-0013-0000"
%GprsCard% = GprsCard, "PCMCIA\Option_International-0013-0000"
%GprsCard% = GprsCard, "PCMCIA\Option-0013-0000"
%GprsCard% = GprsCard, "PCMCIA\Option_International-GSM/GPRS_GlobeTrotter-0314-0001"
%GprsCard% = GprsCard, "PCMCIA\Option-GSM/GPRS_GlobeTrotter-0314-0001"
%GprsCard% = GprsCard, "PCMCIA\Option_International-0314-0001"
%GprsCard% = GprsCard, "PCMCIA\Option-0314-0001"
%GprsCard% = GprsCard4, "PCMCIA\Option_International-GSM/GPRS_GlobeTrotter-0314-0004"
%GprsCard% = GprsCard4, "PCMCIA\Option-GSM/GPRS_GlobeTrotter-0314-0004"
%GprsCard% = GprsCard4, "PCMCIA\Option_International-0314-0004"
%GprsCard% = GprsCard4, "PCMCIA\Option--0314-0004"

[VodafoneModels]
%VodafoneGprsCard% = GprsCard, "PCMCIA\Vodafone-GPRS_Card-0013-0000"
%VodafoneGprsCard% = GprsCard, "PCMCIA\Vodafone-0013-0000"
%VodafoneGprsCard% = GprsCard, "PCMCIA\Vodafone-GPRS_Card-0314-0001"
%VodafoneGprsCard% = GprsCard, "PCMCIA\Vodafone-0314-0001"
%VodafoneGprsCard% = GprsCard4, "PCMCIA\Vodafone-GPRS_Card-0314-0004"
%VodafoneGprsCard% = GprsCard4, "PCMCIA\Vodafone-0314-0004"

[ChinaPutianModels]
%ChinaPutianGprsCard% = GprsCard, "PCMCIA\China_Putian-CPWAA01-0013-0000"
%ChinaPutianGprsCard% = GprsCard, "PCMCIA\China_Putian-0013-0000"
%ChinaPutianGprsCard% = GprsCard, "PCMCIA\China_Putian-CPWAA01-0314-0001"
%ChinaPutianGprsCard% = GprsCard, "PCMCIA\China_Putian-0314-0001"
%ChinaPutianGprsCard% = GprsCard4, "PCMCIA\China_Putian-CPWAA01-0314-0004"
%ChinaPutianGprsCard% = GprsCard4, "PCMCIA\China_Putian-0314-0004"

[EEModels]
%EEGprsCard% = GprsCard, "PCMCIA\E&E-EE828-0013-0000"
%EEGprsCard% = GprsCard, "PCMCIA\E&E-0013-0000"
%EEGprsCard% = GprsCard, "PCMCIA\E&E-EE828-0314-0001"
%EEGprsCard% = GprsCard, "PCMCIA\E&E-0314-0001"
%EEGprsCard% = GprsCard4, "PCMCIA\E&E-EE828-0314-0004"
%EEGprsCard% = GprsCard4, "PCMCIA\E&E-0314-0004"

[PandaModels]
%PandaGprsCard% = GprsCard, "PCMCIA\Panda-PM828-0013-0000"
%PandaGprsCard% = GprsCard, "PCMCIA\Panda-0013-0000"
%PandaGprsCard% = GprsCard, "PCMCIA\Panda-PM828-0314-0001"
%PandaGprsCard% = GprsCard, "PCMCIA\Panda-0314-0001"
%PandaGprsCard% = GprsCard4, "PCMCIA\Panda-PM828-0314-0004"
%PandaGprsCard% = GprsCard4, "PCMCIA\Panda-0314-0004"

[Strings]
Option = "Option"
Vodafone = "Vodafone"
ChinaPutian = "China Putian"
EE = "E&E"
Panda = "Panda"

GprsCard = "WCM GPRS Card"
VodafoneGprsCard = "Vodafone GPRS Card"
ChinaPutianGprsCard = "China Putian CPWAA01 Card"
EEGprsCard = "E&E EE828 Card"
PandaGprsCard = "Panda PM828 Card"

;-------------------------------------------
[GprsCard.nt]
AddReg = Settings, GsmProtocols

[GprsCard.nt.HW]
AddReg = NtHwSettings

[GprsCard]
DriverVer = 12/05/2003, 1.0.5
AddReg = Settings

[GprsCard.HW]
AddReg = HwSettings

;-------------------------------------------
[GprsCard4.nt]
AddReg = Settings, GsmProtocols

[GprsCard4.nt.HW]
AddReg = NtHwSettings, DeviceParameters4

[GprsCard4]
DriverVer = 12/05/2003, 1.0.5
AddReg = Settings

[GprsCard4.HW]
AddReg = HwSettings, DeviceParameters4

;-------------------------------------------
[NtHwSettings]
HKR,, EnablePowerManagement, 0x10001, 01,00,00,00

[HwSettings]
HKLM, System\CurrentControlSet\Services\VxD\VCOMM, EnablePowerManagement, 0x10001, 00,00,00,00

[DeviceParameters4]
HKR,, RxFIFO, 0x10001, 08,00,00,00

;-------------------------------------------
[Settings]
HKR,, DeviceType, 1, 03
HKR,, PortDriver,, "serial.vxd"
HKR,, FriendlyDriver,, "unimodem.vxd"
HKR,, DevLoader,, "*vcomm"
HKR,, PortSubClass, 1, 02
HKR,, ConfigDialog,, "modemui.dll"
HKR,, EnumPropPages,, "modemui.dll,EnumPropPages"
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 10,02,00,00, 00,C2,01,00, 00,00,04,00
HKR,, DCB, 1, 1c,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,, Reset,, "ATZ<cr>"
HKR,, PowerDelay, 0x10001, 1000  ;ms
HKR,, ConfigDelay, 0x10001, 2000  ;ms

HKR, Init, 1,, "AT&F<cr>"
HKR, Init, 2,, "ATE0V1&D2&C1S0=0<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, Blind_On,, "X3"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, FlowControl_Off,, " " ;required, but no command available
HKR, Settings, FlowControl_Hard,, " "

HKR, Responses, "<cr><lf>OK<cr><lf>", 1,              00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1,         02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT <cr><lf>", 1,        02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1,           03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1,      04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1,     05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1,            06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1,       07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1,            08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "0<cr>", 1,                           00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "2<cr>", 1,                           08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "3<cr>", 1,                           04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>", 1,                           03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "6<cr>", 1,                           05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>", 1,                           06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>", 1,                           07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "<cr><lf>CONNECT 300<cr><lf>", 1,     02, 00, 2C,01,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 1200<cr><lf>", 1,    02, 00, B0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1,    02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1,    02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1,    02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>", 1,   02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1,   02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1,  02, 00, 00,C2,01,00, 00,00,00,00

HKR, Responses, "<cr><lf>+CLIP: ", 1,                 95, 00, 00,00,00,00, 00,00,00,00
HKR, EnableCallerID, 1,, "AT+CLIP=1<cr>"
HKR,, VariableTerminator,, "<cr><lf>"

[GsmProtocols]
HKR, Protocol\GSM\ANALOG_RLP, 1,, "AT+CBST=0,,1<cr>"
HKR, Protocol\GSM\ANALOG_NRLP, 1,, "AT+CBST=7,,0<cr>"
HKR, Protocol\GSM\V110_1DOT2K, 1,, "AT+CBST=66<cr>"
HKR, Protocol\GSM\V110_2DOT4K, 1,, "AT+CBST=68<cr>"
HKR, Protocol\GSM\V110_4DOT8K, 1,, "AT+CBST=70<cr>"
HKR, Protocol\GSM\V110_9DOT6K, 1,, "AT+CBST=71<cr>"
HKR, Protocol\GSM\V110_14DOT4K, 1,, "AT+CBST=75<cr>"