Caution: This version BIOS(433AUS25) is for HOT-433 motherboard which does
NOT support PS/2 mouse. If your motherboard support PS/2 mouse, please
download different version BIOS other than this one.
To tell if your motherboard will support PS/2 mouse, just verify
if your motherboard has external keyboard BIOS. If it does, it
will support PS/2 mouse. If the keyboard BIOS socket is empty,
it will NOT support PS/2 mouse.
Warning: Apply the wrong BIOS on the HOT-433 motherboard will cause the whole
system malfunction. At that point, restore the BIOS back to the correct
one will become impossible if you do not have the Flash ROM programmer!
************* HOW TO PROGRAM THE FLASH ROM *************
0. Please follow the following rules to select the BIOS upgrade utility
you need:
If your existing BIOS is AMI BIOS:
Use AMIFLASH.COM if your flash ROM is made by SST.
Use FLASH465.COM if your flash ROM is made by Windbond.
If your existing BIOS is AWARD BIOS:
Use AWDFLASH.EXE program.
1. Copy the the BIOS upgrade utility and the file(.ROM or .BIN) you want
to the same directory of the hard drive in your system.
2. Disable both internal and external cache in the CMOS setup.
3. Reboot the system and press F5 during boot-up to bypass "CONFIG.SYS"
and "AUTOEXEC.BAT".
4. Execute the BIOS flash utility.
5. Then it will ask which BIOS file you want to use. You have to type in
the BIOS file name and reply 'yes' to proceed.
6. After the BIOS is updated, the system will reboot automatically.
Contact Technical Support at 408-945-1480 if you have any questions.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.