LANTASTI.TXT Driver File Contents (nslan.zip)

           NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
                                 for LANtastic

 Getting Started
 ---------------

    Lantastic 6.0 Install
    ---------------------
        Using NDIS driver
        -----------------
         To install NDIS driver "DP83815.DOS", user can use Lantastic
          6.0 install program, and select "NDIS support for network
          adapters" then type path "A:\NDIS2DOS" (specify by install
          program).
          Install program will search "DP83815.DOS" and "PROTOCOL.INI"
          and copy these two files to target directory.

         If user already installed Lantastic 6.0 and want to install
          Ethernet PCMCIA Adapter, just replace AEXNDIS.DOS with NDIS
          driver "DP83815.DOS" at CONFIG.SYS

          NOTE: "DP83815.DOS" is an NDIS driver supported by Vendor.
                "AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT

                *** CONFIG.SYS ***
                DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
                --------------------------------------------------------
                DEVICE=C:\LANTASTI\AEXNDIS.DOS  -------> By Lantastic

                * please replace to *

                DEVICE=C:\LANTASTI\DP83815.DOS  -------> By NSC
                --------------------------------------------------------

                *** STARTNET.BAT ***
                @echo ===== Begin Lantastic configuration =====
                SET LAN_CFG=C:\LANTASTI
                PATH C:\LANTASTI;%PATH%
                SET LAN_DIR=C:\LANTASTI.NET
                rem Please obtain the NETBEUI.EXE program from Microsoft
                NETBEUI
                --------------------------------------------------------
                C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF

                * please replace to *

                C:\LANTASTI\AI-NDIS BIND_TO=DP83815_NIF
                --------------------------------------------------------
                AILANBIO @STARTNET.CFG
                REDIR  LANTA @STARTNET.CFG
                SERVER C:\LANTASTI.NET @STARTNET.CFG
                NET LOGIN \\LANTA
                @echo ===== End LANtastic configuration =====

                *** PROTOCOL.INI ***
                [NETBEUI_XIF]
                    DriverName = netbeui$
                    Sessions = 6
                    NCBS = 12
                --------------------------------------------------------
                    Bindings = AEXNDIS_NIF

                    * please replace to *

                    Bindings = DP83815_NIF
                --------------------------------------------------------
                    LANABASE = 1
                --------------------------------------------------------
                [AEXNDIS_NIF]
                    DRIVERNAME = AEXNDIS$

                    * please replace to *

                [DP83815_NIF]
                    DRIVERNAME = DP83815$
                --------------------------------------------------------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.55