README.txt Driver File Contents (

filename: README.txt
description: How to extend the Netware SNMP.NLM module to support the


The iLANSNMP module extends the SNMP agent for Netware. It 
provides information on the Intel Pro Lan adapters (10/100/1000), 
through the adapter drivers (ce100b, ce1000), and additional 
information concerning the server features, such as teaming and vlan, 
throuhg the Advanced Networking Services (ANS) module.

This file describes how to enable the Netware SNMP module to support the


The SNMP agent package will work best when the Intel Pro Lan adapter 
drivers (ce100b, ce1000) and/or the Intel ANS module (ians) 
are installed and loaded on the system. However, the package will work
with any combination of the 3 modules mentioned above.

The SNMP agent package is compliant with the following driver versions:
- CE100b.lan: ver 4.11 and above
- CE1000.lan: ver 3.03 and above
- iANS.lan  : ver 4.14 and above

Installation instructions:

1. Type "Load <path\>iLANSNMP" on the server prompt.

2. Configure the SNMP community name according to Novell documentation.
   (e.g. type "Load SNMP ControlCommunity=" to enable GET and SET for
   any community name)

3. Register to receive Traps by adding the ip address of the management
   station to the list in the file SYS:\ETC\TRAPTARG.CFG.

Available commands:

- "-h" or "help" - view the help description.

- "cache_time=<nn>" - define a time period that the data structure is
  considered to be valid.
  Two consecutive queries within that time will not cause update of the
  data. This value is set in tenths of a second.
  Default value: 50 (5 seconds).

- "trap_time=<nn>" - define the time period between two consecutive trap
  checks. The units are the same as for cache_time.
  Default value: 10 (1 second).

- "status" - view the current values of these variables.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.56