Readme-Wireless(e).txt Driver File Contents (Modem.zip)

ÿþManual Installation

To install the driver manually, follow the step-by-step procedures described on each individual section for a more clear installation.

Installing the ActionTec 802MR Combo Card/Realtek 8180 Wireless LAN Driver for WinXP

1. Click the "My Computer" icon and click on the "Control Panel" item to open the Control Panel.

2. Double click on the "System" icon. Click the "Device Manager" tab.

3. Click on the "Other Devices" (denoted by the yellow mark symbol), select the "Ethernet Controller" and click on the "Properties" tab.

4. From the "Ethernet Controller Properties" window, click on the "Driver" tab and select the "Update Driver" button.

5. Click on the "Specify the location of the driver (Advanced)" and again click on the "Next" button.

6. Select the "Specify a location" and click the "Browse" button to locate the disk drive of your DVD-ROM driver.

D:\Driver\MiniPCI\Actiontec802MR\Wireless\WinXP to proceed with the installation.

-----------------------------------------------------------------------------------------------------------------------------------------

Installing the Actiontec Combo/Wireless LAN Driver for WinXP

1. Click the "My Computer" icon and click on the "Control Panel" item to open the Control Panel.

2. Double click on the "System" icon. Click the "Device Manager" tab.

3. Click on the "Other Devices" (denoted by the yellow mark symbol), select the "Ethernet Controller" and click on the "Properties" tab.

4. From the "Ethernet Controller Properties" window, click on the "Driver" tab and select the "Update Driver" button.

5. Click on the "Specify the location of the driver (Advanced)" and again click on the "Next" button.

6. Select the "Specify a location" and click the "Browse" button to locate the disk drive of your DVD-ROM driver.

D:\Driver\MiniPCI\Actiontec\Wireless\WinXP to proceed with the installation.

--------------------------------------------------------------------------------------------------

Installing the Accton Combo/Wireless LAN Driver for WinXP

1. Click the "My Computer" icon and click on the "Control Panel" item to open the Control Panel.

2. Double click on the "System" icon. Click the "Device Manager" tab.

3. Click on the "Other Devices" (denoted by the yellow mark symbol), select the "Network Controller" and click on the "Properties" tab.

4. From the "Network Controller Properties" window, click on the "Driver" tab and select the "Update Driver" button.

5. Click on the "Specify the location of the driver (Advanced)" and again click on the "Next" button.

6. Select the "Specify a location" and click the "Browse" button to locate the disk drive of your DVD-ROM driver.

D:\Driver\MiniPCI\Accton\wireless to proceed with the installation.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.