NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
for Windows NT 3.51
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
Getting Started will describe the installation instructions.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
The Windows NT CD and Service Packs are needed to complete this
installation. The Service Packs can be purchased from Microsoft,
downloaded from the MS Website (www.microsoft.com), MS BBS, or
the Microsoft Network.
From the "Main" window, select "Control Panel" icon.
In the "Control Panel" window, select "Network" icon.
In the "Network", select <Add Adapter> button.
Windows NT will display a list of all available drivers.
Select "OTHERS" for third-party adapter not included in the
list.
The program prompts for the directory containing the Ethernet
drivers.
Insert the driver diskette in Drive A, and then type the
following:
A:\WINNT351
Windows NT will attempt to locate the OEMSETUP.INF file in the
specified path. If it exists there, Windows NT will then copy
the appropriate drivers to the Windows NT system.
The drivers are now properly installed. The installation
procedure will then proceed to the next steps. Please refer to
your Windows NT installation guide for information on these
steps.
A window appears allowing you to specify your network connection
type.
For "Network Type", choose the "AutoSense" option. The driver will
auto-detect the media that is connecting to the adapter.
Other possible connection type selections are "10Base-T", "10Base-T
full_duplex", "100Base-TX", and "100Base-TX full_duplex".
After the initial installation, the drivers will be permanently
installed to the Windows NT system. Subsequent accesses to the
network driver list will include these drivers as options.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.