README.TXT Driver File Contents (16xvws.zip)

Creative WaveSynth Readme File
==============================

This file contains additional information to supplement the manual.
Please read all the sections before you proceed with the installation.

This file contains the following sections:

    1.  Installation
    2.  Full-Duplex Constraints
    3.  Acknowledgments



1. INSTALLATION

   The full installation option requires about 6 MBytes of hard disk
   space for program files and an additional 2 MBytes for working space.
   You might need more if your drive is in compressed form.


2. FULL-DUPLEX CONSTRAINTS

   Your audio card supports full-duplex recording and playback. However, to 
   make full use of this feature, please make sure you observe the following 
   constraints:

   a. Start only one session of simultaneous playback and recording.  
   b. Use the same sampling rate for both operations.
   c. Preferably play back and record audio files which are in uncompressed
      wave format, that is, Pulse Code Modulation (PCM).
   d. Reduce the sampling rate for both operations if your audio playback or
      recording session is too slow.

   NOTE: The Full-Duplex and DirectSound capabilities are mutually exclusive. 
	 If you activate the full-duplex feature, the DirectSound capability
	 cannot be enabled. And vice versa.


3. ACKNOWLEDGMENTS

    MS-DOS, MS-DOS, Windows, and the Windows logo are trademarks of Microsoft
    Corporation.  All other products are trademarks or registered trademarks
    of their respective owners.


            **********  E N D   O F   R E A D M E  **********
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.03