Readme_first.txt Driver File Contents (twwusb_7640335.exe)

Introduction
============
This document describes the procedure to install driver for the 2Wire Wireless USB Adapter under Microsoft Windows, and to run a wireless configuration program to configure your 2Wire Wireless USB Adapter to work with a 2Wire HomePortal or OfficePortal wireless gateway.  These drivers work under Microsoft Windows 98SE, ME, 2000, and XP.


STEP 1 - Driver Installation
============================

1. Make sure your 2Wire Wireless USB Adapter has not been connected to your computer USB port.

2. Double-click on the file to run WinZip Self-Extractor.  The driver installation files will be placed in your hard disk in the C:\TWWUSB_TEMP directory

3. Connect your 2Wire Wireless USB Adapter to an available USB port in your computer.  Windows Found New Hardware Wizard will startup.

4. Select the option to search for driver in specific location.  Specify C:\TWWUSB_TEMP as the location of driver.

5. Follow on-screen instruction to finish driver installation.


STEP 2 - Wireless Configuration
===============================

1. Run the program WirelessCfg.exe in the directory C:\TWWUSB_TEMP.  You can do so by clicking on the Windows Start button and select Run.  The Windows Start button is typically at the lower left corner of the screen.  Type in C:\TWWPC_TEMP\WirelessCfg.exe  to launch the program.

2. Follow on-screen instruction to configure your wireless setting.  Enter the serial number and encryption key as they are printed on the bottom of your 2Wire wireless gateway.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.90