**** SATO MEMORY CARD MANAGER **** This version is for use with BJR command and a maximum of 10 True Type Fonts can be stored. For more than 10 True Type fonts you must use a newer version and the firmware in your printer must support BJT command. Please contact SATO Technical support for assistance. Be sure to have your printers firmware version identified before you call. Call 408-745-1379 Software Support ********************************************************************** * This program executable, help file and related text files may be * * distributed freely and may be used without fee by any individual * * for non-commercial use and by any United States Government * * organization. This software program may not be distributed as * * a part of any commercial package. * ********************************************************************** !!!! REQUIRES EXTENDED MEMORY OPTION AND ADDITIONAL SRAM CARD !!!! ************************************************************************** USE THESE INSTRUCTIONS FOR SETTING UP THE EXTENDED MEMORY CARD OPTION ON YOUR "RISC" SERIES PRINTERS. IT IS STRONGLY RECOMMENDED THAT YOU HAVE LABEL WIZARD 3.X AND THE MEMORY CARD MANAGER LOADED ON YOUR PC, BEFORE YOU CONTINUE WITH THESE INSTRUCTIONS. IT IS POSSIBLE TO USE THE MEMORY CARD MANAGER WITHOUT LABEL WIZARD 3.X BUT THE LEVEL OF PROGRAMMING IS ESCALATED. ************************************************************************** The Label Wizard Memory Card Manager is a software package developed for preparing and downloading data to PCMCIA memory cards installed in SATO Direct Thermal and Thermal transfer printers. The SATO printer must have the Memory Card Option installed. Your PC must have the Label Wizard, "SATO Generic Driver", installed. The Label Wizard Memory Card Manager program is independent of the Label Wizard label design and production software, and is a stand-alone program. Label Wizard Memory Card Manager lets you prepare data that include TrueType fonts, graphics and label forms. It will allow you to: * Add, edit and view data, prepared for download to the memory cards. * Check the available memory card space before downloading. * Share information about the contents of the memory card between the Label Wizard Memory Card Manager and the Label Wizard label design software. * Print the downloaded data from the memory card. * Label Wizard Memory Card Manager is a Windows based program with a user-friendly and intuitive graphic interface. **** Supported Printers **** The Label Wizard Memory Card Manager currently supports memory cards on the following models of SATO Thermal printers, and others will be added as they become available. CL408 CL412 M-8460S CL608 CL612 M-8459S M-5900E M-5900L XL400 M-8480S M-8485S XL410 M-8400RV M-8490S **** Installation **** The LABEL WIZARD Memory Card Manager software is typically supplied on one diskette, although a self extracting compressed file is available on this site. The procedure for loading the software is similar for both Windows 3.1 and Windows 95/98. The description given here assumes you will be loading the software on a computer running Windows 3.1. If you are using Windows 95/98, please refer to the Windows 95/98 documentation for instructions in loading software programs. 1. Insert the diskette into the floppy disk drive, go to the Window Program Manager and select the Run command under Files menu, or from the directory that you have placed the self extracting/decompressed file in. 2. In the "Command Line" text box enter A:\INSTALL.EXE or browse to the appropriate directory example (c:\satomcm\disk1). 3. The installation procedure will ask you to install the software to the following directory:- "C:\MCMANAGE". 4. Confirm the directory with the "OK" button or enter the directory name of your choice. 5. The installation procedure will install the software and make a new program group, called MC Manager with an icon for the Memory Card Manager program. **** COMMAND REFERENCE **** This section contains a list of all the menu commands and describes their functions. ** FILE ** The commands under "File" menu open and close the memory card files and take care of the printing. <<New>> This command opens a new memory card management file and prepares the working area. The header line on the screen shows the program name and the name of the open memory card file. Initially, no file name will be shown until you have saved the first memory card file. The Command Line (second line of the menu bar) shows the command options which are available when preparing the data for download. The Icons below the Command Line graphically represents some of frequently used commands. The section below the Icons provides information about memory card: the the total memory size, the free memory available for downloading and the used memory. The next section is divided to three parts showing the names of the fonts, graphics and formats, prepared for downloading. The Information area shows the picture of the selected fonts and graphics. At the very bottom of the screen the Status Bar shows the meaning of the selected commands. <<Open>> This command opens an existing memory card file. The default directory for storing the files is "C:\WIZARD\MEMCARDS". You can change the source directory according to your needs. <<Save>> Use this command to save the memory card file to the default directory ("C:\WIZARD\MEMCARDS"). The file name automatically gets the extension *.MCM. <<Save As>> When you want to save the existing memory card file under another name (or copy the file), use this command. The file name automatically gets the extension *.MCM. <<Printer Set-up>> It is important to define on which port (LPT1, LPT2, COM1...) the SATO printer is connected. <<Exit>> This command will close the program. ** VIEW ** Under the "View" menu, there are three switches to turn the presentations of fonts, graphics and forms on and off. When you want to download fonts, only selecting "Fonts" will result in turning off the presentation of information for graphics and forms. <<Fonts>> When selected (check mark by the selection), font information will be shown. <<Graphics>> When selected (check mark by the selection), graphics information will be shown. <<Forms>> When selected (check mark by the selection), forms information will be shown. ** MEMORY CARD ** This menu allows information on the memory card description to be entered. <<Edit>> This command defines the memory card description and size. <<Format>> This command formats the memory card and erases all the data on it. <<Reload>> Use this command to retrieve the data from the memory card. The command can be used also to copy memory cards. <<Download>> Downloads the memory card data to an empty memory card. <<Status>> This command produces the printout of the memory card status on SATO printer. ** FONTS ** The commands under the "Fonts" menu help you to prepare the fonts to download to the memory card. <<Add>> When adding a new font to the memory card, a font must first be selected. You can select among all installed Windows TrueType fonts, along with all the sizes and styles (bold, italic...) from the dropdown list box. Once the font is selected, it must be decoded to be prepared for downloading. The decoding process lists pertinent information about the font: * Maximum cell size * Original orientation * Spacing * Font style * Symbol set * Total number of characters * Number of selected characters * Total space required * Selected characters space required A sample of the selected font is shown in this window. When you do not want, or need, the whole character set, you can define which characters must be downloaded. Clicking on the "Select chars" button will allow you to specify the characters that you do not want to download. Click on the hex value box for the character you do not want to download and an "X" will appear in that box. Should you want to download a specific range, click on the "Range" button and define the range. Once you are satisfied with settings, select "OK" and the selected fonts will appear on the list of fonts. <<Delete>> Use this command to delete the highlighted font from the list of fonts. <<Download>> Highlight the font name you want to download to the memory card and activate the "Download" command. The program will decode and download the font. The downloaded font will be signed with a "D" before its name. <<Remove>> Removes the highlighted down-loaded font from the memory card. The font name stays on the list, but the "D" is removed. <<Edit>> You can edit the font on the list by choosing other characters or even the font size. This command can also be activated by double-clicking on the font name on the list. Downloaded fonts cannot be modified. <<Test Print>> Prints the highlighted downloaded font on SATO printer. ** GRAPHICS ** <<Add>> This command adds the specified graphics to a list of graphics to be down-loaded. You can select files in *.BMP, *.PCX and *.WMF format. Clicking on the "OK" after selecting the appropriate file name will add the graphics name to the list. <<Delete>> Use this command to delete the highlighted graphic from the list of graphics. <<Download>> Highlight the graphics name you want to down-load to the memory card and activate the "Download" command. The program will down-load the graphic. The down-loaded graphic will be signed with a "D" before its name. <<Remove>> Removes the highlighted downloaded graphic. The graphics name stays on the list, but the "D" is removed. <<Edit>> You can edit the graphics on the list by choosing other graphics. The same dialog can be entered by double-clicking on the graphics name in the list. A downloaded graphics cannot be modified. <<Test Print>> Prints the selected downloaded graphics on the SATO printer. ** FORMS ** <<Add>> The forms, prepared in LABEL WIZARD, can be added to the list and downloaded to the memory card. Be aware of the limitations when preparing forms, graphics and TrueType fonts cannot be used. <<Delete>> Use this command to delete the highlighted form from the list. <<Download>> Highlight the form name you want to down-load on the memory card and activate the "Download" command. The program will download the form. The downloaded form will be signed with a "D" before its name. <<Remove>> Removes the highlighted downloaded form from the memory card. The form name stays on the list, but the "D" is removed. <<Edit>> You can edit the form on the list by choosing "other form" from the menu. The same dialog box can be entered by double-clicking on the form name in the list. A down-loaded form cannot be modified. <<Test Print>> Prints the selected downloaded form on the SATO printer. ** OPTIONS ** <<Settings>> This command defines the print position of the test print, the source directory for memory card files and the memory card slot number. !!!! MEMORY CARD MANAGER INSTRUCTIONS FOR EXTENDED PRINT LENGTH !!!! *************************************************************************** LISTED BELOW IS AN EXAMPLE OF HOW TO USE THE MEMORY CARD MANAGER TO FORMAT A PCMCIA CARD FOR AN EXTENDED LABEL LENGTH USING THE LABEL WIZARD 3.X PROGRAM. *************************************************************************** GO INTO YOUR PRINT MANAGER AND MAKE SURE THAT YOU HAVE THE SATO GENERIC DRIVER LOADED AND SELECTED AS YOUR DEFAULT PRINTER. IF THE SATO GENERIC PRINTER IS SELECTED, MAKE SURE THAT YOU ARE CONNECTING TO THE CORRECT PORT. IF THE DRIVER ISN’T IN THE PRINT MANAGER, THEN YOU MUST LOAD IT FROM DISK #2 OF YOUR LABEL WIZARD DISKETTES. DOUBLE CLICK ON THE MEMORY CARD MANAGER ICON. NOW THAT YOU ARE IN THE MEMORY CARD MANAGER, GO TO FILE AND SELECT NEW. GO TO OPTIONS AND SELECT SETTINGS, SELECT THE CARD SLOT THAT YOU HAVE YOUR MEMORY CARD IN. WHILE STILL IN THE SETTINGS BOX, UNDER MEMORY CARD PATH, TYPE : C:\WIZARD\MEMCARD, THEN SELECT OK. GO TO MEMORY CARD AND SELECT EDIT, IN EDIT YOU MUST SELECT YOUR MEMORY CARD SIZE. GO TO MEMORY CARD AND SELECT FORMAT. GO TO MEMORY CARD AND SELECT STATUS, YOU SHOULD HAVE SEEN THE MEMORY CARD STATUS PRINT OUT. GO TO FILE AND SAVE (YOU DO NOT HAVE TO TYPE AN EXTENSION, IT WILL AUTOMATICALLY GIVE A .MCM EXTENSION) AND THEN EXIT. LOAD UP LABEL WIZARD. ONCE IN LABEL WIZARD YOU WANT TO GET INTO THE LABEL SETUP AND SELECT MEMORY CARD IN THE BOTTOM RIGHT HAND CORNER. SELECT THE FILE THAT YOU HAVE CREATED PREVIOUSLY IN THE MEMORY CARD MANAGER AND THEN PRESS THE ACTIVATE BUTTON. BACK AT THE LABEL SETUP SELECT THE EXPANDED PRINT LENGTH AND THEN PUT THE DESIRED LABEL LENGTH IN THE LABEL HEIGHT BOX. YOU SHOULD NOW BE READY TO PRINT LONGER LABELS. ************************************************************************* Comments or Questions can be directed to: SATO America, Inc. Technical Support Department 545 Weddell Drive Sunnyvale, CA. 94089 Phone: 408-745-1379 Fax: 408-745-1309 or e-mail techsupport@satoamerica.com ******LIMITED WARRANTY AND DISCLAIMER OF WARRANTY****** THIS SOFTWARE AND ACCOMPANYING WRITTEN MATERIALS (INCLUDING INSTRUCTIONS FOR USE) ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. FURTHER, SATO AMERICA, INC. DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS OF USE, OF THE SOFTWARE OR WRITTEN MATERIALS IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF THE SOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE YOU, AND NOT SATO AMERICA INC. OR ITS DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES, ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. THE ABOVE IS THE ONLY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, THAT IS MADE BY SATO AMERICA, INC. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SATO AMERICA, INC., ITS DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. NEITHER SATO AMERICA, INC. NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT EVEN IF SATO AMERICA, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ************************************************************************** ########################################################################## ************************************************************************** Date Created: 11/01/96 By: RR Last Modification: 7/12/99Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.