1. mbcapi_2k1.ZIP Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (mbcapi_2k1.ZIP)

For Windows 2000 NDIS WAN installation:
---------------------------------------

Open the "Control Panel"
Open "System"
Click "Hardware" tab
Click "Hardware Wizard" button
Click "Next"

Click "Add/Troubleshoot a device"
Click "Next"

Click "Add a new device"
Click "Next"

Click "No, I want to select the hardware from a list"
Click "Next"

Click "Network Adapters"
Click "Next"

Click "Have a disk"

Enter the path to the "NDISWAN.WDM" directory
Click "OK"

Click "Zoltrix NDIS WAN WDM Miniport"
Click "Next"

Click "Next"
Click "Finish"


For Windows XP CAPI 2.0 / NDIS WAN WDM Miniport installation:
-----------------------------------------------------------
1. First install the ISDN Adapter into your system's PCI slot and then power up the computer.
2. After Windows XP is booted, "Found New Hardware Wizard" will be displayed.
3. Click "Install from a list or specific location(Advance)
4. Click "Search for the best driver in these location" or browse to A:\WDM to install. 
5. Click "Finish" after driver is installed.


When the above steps are finished, you have to install "Zoltrix NDIS WAN WDN Miniport" driver.  Follow the steps below:
1. Go to System in the control panel.  
2. Click Hardware tab. Click "Add Hardware" and "Next" to proceed.
3. Click "Yes, I have already connected the hardware"
4. Browse to the bottom of the scroll bar and select "Add new hardware".
5. Click "Install the hardware that I manually select from the list(Advance".
6. Select "Network Adapters" and click "Next".
7. Click "Have Disk" 
8. Browse to A:\NDISWAN.2K. Click "Open" and "OK".
9. Select "Zoltrix NDIS WAN WDM Miniport" and click "Next".
10. Click "Continue Anyway" to install driver.  Click "Finish" when done. 

Installation is completed!