Windows NT 3.51 and 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT v3.51,
and v4.0 driver for 32 Bits PCI Bus Fast Ethernet adapter.
Location of Driver: \WINNT\PCIND4.SYS or NT351\PCIND3.SYS
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select "<other> Requires disk from
manufacturer", and then press <Enter> button.
5. Insert the 32 Bits driver disk in drive A, enter drive and pathname
A:\WINNT or A:\NT351 which is the path where the
setup file OEMSETUP.INF is located, and then choose the OK button.
6. The screen will appear "Select Line Speed" dialog box which is provide
by PCIND.SYS driver. The default value is "auto" so that the
PCIND PCI Fast Ethernet adapter and its driver PCIND.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the PCIND.SYS is
loading. The other values, "10" or "100", are only used when you want
to forced PCIND PCI Fast Ethernet adapter to 10Mb or 100Mb.
7. NT will then perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
8. Restarting your system you will acquire network service.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.