+ KDS Monitors +
+ Copyright 2001 KDS +
+ Windows 98/XP Driver Installation +
+++++++++++++++++++++++++++++++++++++
==================================================================
i. Windows 98/XP Installation
ii. Support Information
==================================================================
i. Windows 98
==================================================================
Installation process for Windows 98.
The self extractor will extract KDS monitor drivers to
C:\KDS folder. Follow the procedure below:
1. Close all open applications.
2. From Windows the Windows desktop, click;
START
Settings
Controll Panel
3. Double click Display Properties
4. Click the Settings tab
5. Click Advanced Properties
6. Click on the Monitor Tab
NOTE:If you don't have a MONITOR tab, refer to ii.a.
section below.
7. Click on Change
8. Click on the Show all Hardware button
9. Click Have Disk
10. Click Browse
11. Double Click on C:
12. Click c:\KDS
13. Click OK
14. Highlight KDS under Manufacturers from the List
15. Click on the Monitor that you have
16. Click Apply
You will get a message "Windows will now Adjust the
Refresh Rate. If the screen becomes garbled wait 10
seconds and your original setting will return.
17. Do You want to Keep these settings Say "YES"
18. Click OK
19. Close
20. Done
i.a NO MONITOR TAB in DIsplay Properties
==================================================
1. Close all programs
2. Click START
3. Click SETTINGS
4. Click CONTROL PANEL
5. Click SYSTEM
6. CLick DEVICE MANAGER
7. Double click MONITOR. Current device will be displayed.
8. Highlite the device
9. Double-click device
10. You will get two tabs; GENERAL and DRIVER
11. Click on DRIVER
12. Click UPDATE DRIVER
13. Click NEXT
14. Click DISPLAY LIST OF ALL DRIVERS IN A SPECIFIC LOCATION
SO YOU CAN SELECT THE DRIVERS YOU WANT.
15. Click NEXT
16. Click HAVE DISK
17. Type C:\KDS over the default A:\
18. Click OK
19. Click OK
20. Click NEXT
21. Click NEXT
22. Click FINISH
==================================================================
ii. Windows XP
==================================================================
Installation process for Windows 98.
The self extractor will extract KDS monitor drivers to
C:\KDS folder. Follow the procedure below:
1. Close all open applications.
2. From Windows the Windows desktop, click;
START
Settings
Controll Panel
3. Double click Display Properties
4. Click the Settings tab
5. Click Advanced Properties
6. Click on the Monitor Tab
NOTE:If you don't have a MONITOR tab, refer to ii.a.
section below.
7. Click on properties
8. Click on the Driver tab
9. Click on the Update Driver button
10. Click on 'Install from a list or specific location' (second option)
11. Click on the Next button
12. Click 'Don't search. I will choose the driver to install.'
13. Click on the Next button
14. Click on the Have Disk button
15. Backspace 'A:\' from the box
16. Type 'C:\KDS' in the box
17. Click on the OK button
18. Select the model of the monitor from the list
19. Click on the Next button
20. Click Continue Anyway button
21. Click on the Finish button
22. Click on the Close button
23. Click on the OK button
24. Click on the OK button
iii. SUPPORT INFORMATION
If you require additional support, call 1-800-283-1311
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.