ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Trust PCI Ethernet Card 100MB Installation for SCO UNIX 5.X Driver ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A. login as root user (on maintenance mode). B. use "custom" utility to install the 840 SCO 5.x software package. 1. doscp a:/<path>/w840s5.dst /tmp/VOL.000.000. 2. execute "custom" utility, 3. select "Software" item in the "Software Manager (custom) on hostname" window to get into pull down menu, move to "Install New...", then press [Enter] button, 4. ÚÄÄÄÄÄÄÄÄÄÄÄÄ Begin Installation on hostname ÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ What host (machine) do youwant to install from? ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ <*> From scosysv ³ ³ ³ ³ < > Fraom another host ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [Continue] [Cancel] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ select from hostname and press [Continue] button, 5. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Select Media ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Insert media, and select media device. ³ ³ ³ ³ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ-ÄÄ¿ ³ ³³Media Device:|| Floppy Disk Driver 0 _______________³v³ ³ ³ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³³ *Floppy Disk Driver 0 ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄ´³ SCSI CD-ROM Driver 0 ³ ÃÄÄÄÄÄÄÄÄÄ´ ³ [Continue] ³³ Media Images ³ ³ [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÙ press [] to get into pull down menu, select "Media Images" and press [Continue] button, 6. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter Image Directory ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³Enter the full path to the directory containing media images. ³ ³ ³ ³Image Directory: | /tmp___________________________________________³ ³ ³ ³Note: media images must follow the naming convention ............ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³[OK] [Cancel] [Help]³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ input the path name where VOL.000.000 is located, and press [OK] button, 7. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter Image Directory ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Installing: Trust PCI Ethernet Card 100MB Network Driver ....... ³ ³ Do you want a FULL or PARTIAL installation? ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³[FULL] [Partial] [Cancel] [Help]³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ-Ù press [FULL] button, and wait for the following message is displayed: ÚÄÄÄÄÄÄÄÄÄÄÄ Question ÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Installation Complete ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [OK] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 8. Press [Enter] button then you will find out that "Trust PCI Ethernet Card 100MB Network Driver (version 1.0.0)" is added to the package list. C. Use "netconfig" utility to install the driver. 1. select "Hardware" item from the "Network Configuration Manager" window to get into pull down menu, move to "Add new LAN adapter", then press [Enter] button, 2. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Add new LAN adapter ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Select network adapter to be added: ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³* 3COM EtherLink 16/16TP Adapter ³ ³ ³ ³ . ³ ³ ³ ³ . ³ ³ ³ ³ . ³ ³ ³ ³ . ³ ³ ³ ³ Trust PCI Ethernet Card 100MB ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [Continue] [Cancel] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ use [] key to move to "Trust PCI Ethernet Card 100MB" and then press [Continue] button, 3. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Network Driver Configuration ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Enter the configuration of Trust PCI Ethernet Card 100MB: ³ ³ ³ ³ ------------------------------------ ³ ³ Device#: | | 0 __________________|v| ³ ³ ------------------------------------ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [Continue] [Cancel] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ you can set the Device# to select some specified 840 board. if you do not make sure this value, you do not change the value, continue the installation, this driver will search PCI Ethernet card automatically. when you finish the setting, press [Continue] button, you can click [Advanced Options] buttom to set other parameters. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Network Driver Configuration ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Enter the configuration of Trust PCI Ethernet Card 100MB: ³ ³ ³ ³ ---------------------------- ³ ³ Burst Length: | |BurstLength_is_32_long>v| ³ ³ ---------------------------- ³ ³ --------------------------- ³ ³ Cache Alignment: | |CacheAlignment_is_32_>v| ³ ³ --------------------------- ³ ³ --------------------------- ³ ³ Transmit Threshold Value: | |0_____________________|v ³ ³ --------------------------- ³ ³ --------------------------- ³ ³ Line Speed: | |AutoDetect___________|v| ³ ³ --------------------------- ³ ³ --------------------------- ³ ³ Full Duplex Function: | |AutoDetect___________|v| ³ ³ --------------------------- ³ ³ * - indicates conflict with other hardware. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ | [OK] [Cancel] [Help] | |--------------------------------------------------------------------| Parameters: 1) Burst Length: The default value is "BurstLength_is_32_longwords". Burst Length defines the maximum number of long words that can be transferred within one PCI burst transaction. The reasonable values are "BurstLength_is_1_longword", "BurstLength_is_2_longwords", "BurstLength_is_4_longwords", "BurstLength_is_8_longwords", "BurstLength_is_16_longwords", and "BurstLength_is_32_longwords". 2) Cache Alignment, The default value is "CacheAlignment_is_32_longwords". Cache Alignment defines the address boundary for data burst. The reasonable values are "CacheAlignment_is_8_longwords", "CacheAlignment_is_16_longwords" and "CacheAlignment_is_32_longwords". 3) Transmit Threshold Value, This value decides the transmit threshold level of the transmit FIFO. Transmission will start immediately after the transmit FIFO has reached the threshold level or full pkt has been transferred to the transmit FIFO if the frame length is less than the transmit threshold level. TxThreshold Transmit Threshold Level 00H full pkt 01H 16 bytes 02H 32 bytes -- -- 7FH 2032 bytes" 4) Line Speed, The default value is "AutoDetect". This adapter can be operationed in 10M or 100M Mbps. The reasonable values are "AutoDetect"(auto detect line speed by the driver), LineSpeedIs10M(set the line speed is 10M) and LineSpeedIs100M(set the line speed is 100M). 5) Full Duplex Function: This adapter can be in half or full duplex mode. In half duplex mode, the W89C840 can only either transmit or receive. In full duplex mode, the W89C840 can transmit and receive at the same time. The reasonable values are AutoDetect(auto detect full duplex function by the driver), Disable(disable full duplex), and Enable(enable full duplex). when you finish the settings, press [OK] buttom, 4. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Information ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Please verify adapter is set to the configuration just entered. ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [OK] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ press [Enter] button, 5. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Add protocol ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ elect one networking product to be added to ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ HW Trust PCI Ethernet Card 100MB ³ ³ ³ ³ * - SCO IPX/SPX ³ ³ ³ ³ - SCO TCP/IP ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [Add] [Cancel] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ use [] key to move cursor to "SCO TCP/IP" then press [Add] button, 6. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCO TCP/IP Configuration ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ³ ³ ³ ³ Local Host Name: | hostname_______________| [ Advanced ] ³ ³ IP Address: | 10.2.22.142____________| Options... ³ ³ Netmask: | 255.0.0.0______________| ³ ³ Broadcast Address: | 10.255.255.255_________| ³ ³ Domain Name: | hostname.com___________| ³ ³ TCP connections: | 256 ___________________| ³ ³ Pseudo ttys: | 32_____________________| ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [OK] [Cancel] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ input the related information then press [OK] button, 7. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Message ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ The following products were successfully configured into the system³ ³ SCO TCP/IP | ³ ³ Trust PCI Ethernet Card 100MB - Deivce #0 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [ OK] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ press [OK] button, 8. at "Hardware" item press [Enter] button to get into pull down menu then move to "Exit" then press [Enter] button, 9. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ- Question ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ The Unix Kernel must be re-linked before the changed ³ ³ ??? made here will have an effect. ³ ³ Do you want to re-link the kernel now? ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ [ YES ] [Help] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ press [YES] button to relink to kernel, 10.Do you want this kernel to boot by default (y/n) y 11.Do you want to the kernel environment rebuilt (y/n) y D. reboot this UNIX system. #shutdown -y -g0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.