ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Trust PCI Ethernet Card 100MB Installation for IBM LAN Server ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. Installation for IBM LAN Server
1. When installation program asks for a network drivers,
select "Other Driver". (You can also type "C:\IBMCOM\INSTALL"
to re-invoke this process)
2. Insert this driver diskette into drive A:
3. Type "A:\NDIS2\OS2" and press <Enter>. "Trust PCI Ethernet Card
100MB" will appear at Network Adapter list box.
4. Select "Trust PCI Ethernet Card 100MB" and ADD it.
5. ADD the protocol you desired.
6. Follow the direction to finish the setup procedure.
B. Installation for DOS LAN Service
1. When installation program asks for a network drivers,
select "Network card not shown in below".
2. Insert this driver diskette into drive A:
3. Type "A:\NDIS2\DOS" and press <Enter>.
4. Follow the direction to finish the setup procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.