[Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA PCI [Options] AMDPCI [FileConstants] GenericInfVersion = " v3.10" GenericSysName = "amdpcn.sys" GenericName = "AMDPCN" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Microsoft" ProductMajorVersion = "3" ProductMinorVersion = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "AMDPCN" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "pcntn3Sys ndisDriver pcntn3Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """pcntn3Sys"" yes no container" NetRuleSoftwareClass = {"pcntn3Driver basic"} NetRuleSoftwareBindable = {"pcntn3Driver pcntn3Adapter non exclusive 100"} ProductHardwareName = "AMDPCN" NetRuleHardwareType = "pcntn3 pcntn3Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"pcntn3Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms FileConstants$(!STF_LANGUAGE) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the PCNet family driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set IRQValue = *($(IRQList), 9) set IOBaseAddrValue = *($(IOBaseAddrList), 17) set DMAChannelValue = *($(DMAChannelList), 5) set RadioIn = {4} set BusScanValue = "ALL" set LED0Value = *($(LEDList), 1) set LED1Value = *($(LEDList), 1) set LED2Value = *($(LEDList), 1) set LED3Value = *($(LEDList), 1) set TPValue = 1 set FullDuplexValue = *($(FullDuplexList), 4) set BusTimerValue = *($(BusTimerList), 10) Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) installadapter = + set IsISA = 0 set Vendor = 4130 set CardID = 8192 Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CardID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set AdapterList = $($R0) set NewAdapterList = {} set NumNew = 0 ForListDo $(AdapterList) set BusNumber = *($($),1) set SlotNum = *($($),2) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNumber), + $(SlotNum), $(GenericPCIAdapterName), $(ProductHardwareName) ifstr(i) $($R1) != "YES" set-add NumNew = $(NumNew),1 ifstr(i) $(NewAdapterList) == {} set NewAdapterList = {$($)} else set NewAdapterList = >($(NewAdapterList),$($)) endif endif EndForListDo set AdapterList = $(NewAdapterList) ifint $(NumNew) == 0 set AdapterList = {{0,0,0}} set IsISA = 1 endif debug-output $(AdapterList) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) endif install "Install-Helpfile" endif endif SetHelpFile "pcnet.hlp" 1 11 Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" goto adaptersetup configureadapter = + SetHelpFile "pcnet.hlp" 1 11 Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "BUS_TO_SCAN" set BusScanValue = $(ValueData) else-ifstr(i) $(ValueName) == "TP" set TPValue = $(ValueData) else-ifstr(i) $(ValueName) == "LED0" set LED0Value = $(ValueData) else-ifstr(i) $(ValueName) == "LED1" set LED1Value = $(ValueData) else-ifstr(i) $(ValueName) == "LED2" set LED2Value = $(ValueData) else-ifstr(i) $(ValueName) == "LED3" set LED3Value = $(ValueData) else-ifstr(i) $(ValueName) == "IOBaseAddress" set IOBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValue = $(ValueData) else-ifstr(i) $(ValueName) == "DMAChannel" set DMAChannelValue = $(ValueData) else-ifstr(i) $(ValueName) == "FDUP" set FullDuplexValue = $(ValueData) else-ifstr(i) $(ValueName) == "BUSTIMER" set BusTimerValue = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) ifint $(BusInterfaceType) == 5 set IsISA = 0 else set IsISA = 1 endif else-ifstr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) endif EndForListDo Ifint $(TPValue) == 0 Set CheckItemsIn = {"OFF"} Else Set CheckItemsIn = {"ON"} Endif Ifstr $(BusScanValue) == "PNP" Set RadioIn = {1} Else-Ifstr $(BusScanValue) == "VESA" Set RadioIn = {2} Else-Ifstr $(BusScanValue) == "ISA" Set RadioIn = {3} Else-Ifstr $(BusScanValue) == "ALL" Set RadioIn = {4} Else-Ifstr $(BusScanValue) == "" Set RadioIn = {4} Endif Debug-Output $(InfName)" TP is "$(TPValue) ifint $(IsISA) == 1 set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValue))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 2) endif Debug-Output $(InfName)" IRQ_Level is "$(IRQValue) set DMAChannelValue = *($(DMAChannelList), ~($(DMAChannelValues),$(DMAChannelValue))) ifstr(i) $(DMAChannelValue) == "" set DMAChannelValue = *($(DMAChannelList), 2) endif Debug-Output $(InfName)" DMA is "$(DMAChannelValue) set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue) endif set LED0Value = *($(LEDList), ~($(LEDValues),$(LED0Value))) ifstr(i) $(LED0Value) == "" set LED0Value = *($(LEDList), 1) endif Debug-Output $(InfName)" LED0 is "$(LED0Value) set LED1Value = *($(LEDList), ~($(LEDValues),$(LED1Value))) ifstr(i) $(LED1Value) == "" set LED1Value = *($(LEDList), 1) endif Debug-Output $(InfName)" LED1 is "$(LED1Value) set LED2Value = *($(LEDList), ~($(LEDValues),$(LED2Value))) ifstr(i) $(LED2Value) == "" set LED2Value = *($(LEDList), 1) endif Debug-Output $(InfName)" LED2 is "$(LED0Value) set LED3Value = *($(LEDList), ~($(LEDValues),$(LED3Value))) ifstr(i) $(LED3Value) == "" set LED3Value = *($(LEDList), 1) endif Debug-Output $(InfName)" LED3 is "$(LED3Value) set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexValue))) ifstr(i) $(FullDuplexValue) == "" set FullDuplexValue = *($(FullDuplexList), 1) endif Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue) set BusTimerValue = *($(BusTimerList), ~($(BusTimerValues),$(BusTimerValue))) ifstr(i) $(BusTimerValue) == "" set BusTimerValue = *($(BusTimerList), 1) endif Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue) adaptersetup = + Set from = adapteroptions adapteroptions = + LoadLibrary "Disk 1" .\$(DialogDllName) hLib ifint $(IsISA) == 0 read-syms FileDependentDlgPCI$(!STF_LANGUAGE) Debug-Output $(InfName)" TP is "$(TPValue) Debug-Output $(InfName)" LED0 is "$(LED0Value) Debug-Output $(InfName)" LED1 is "$(LED1Value) Debug-Output $(InfName)" LED2 is "$(LED2Value) Debug-Output $(InfName)" LED3 is "$(LED3Value) Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue) Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue) ui start "Inputdlg" $(hLib) else debug-output "read the isa dialog" read-syms FileDependentDlg$(!STF_LANGUAGE) Debug-Output $(InfName)" Bus is "$(BusScanValue) Debug-Output $(InfName)" TP is "$(TPValue) Debug-Output $(InfName)" LED0 is "$(LED0Value) Debug-Output $(InfName)" LED1 is "$(LED1Value) Debug-Output $(InfName)" LED2 is "$(LED2Value) Debug-Output $(InfName)" LED3 is "$(LED3Value) Debug-Output $(InfName)" DMA is "$(DMAChannelValue) Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue) Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue) Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue) ui start "InputDlg" $(hLib) endif set ExitButton = $(ButtonPressed) Debug-Output " ButtonPressed "$(ButtonPressed) debug-output $(DLGEVENT) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" ifint $(IsISA) == 1 set IOBaseAddrValue = $(Combo1Out) set IRQValueValue = $(Combo2Out) set DMAChannelValue = $(Combo3Out) set FullDuplexValue = $(Combo4Out) set BusTimerValue = $(Combo5Out) set ExitButton = $(ButtonPressed) set BusIndex = *($(RadioOut),1) else set FullDuplexValue = $(Combo1Out) set BusTimerValue = $(Combo2Out) set ExitButton = $(ButtonPressed) set BusIndex = *($(RadioOut),1) endif Ifint $(BusIndex) == 1 Set BusScanValue = "PNP" else-Ifint $(BusIndex) == 2 Set BusScanValue = "VESA" else-Ifint $(BusIndex) == 3 Set BusScanValue = "ISA" else-Ifint $(BusIndex) == 4 Set BusScanValue = "ALL" Endif Set Chk = *($(CheckItemsOut), 1) Ifstr(i) $(Chk) == "ON" Set TPValue = 1 Else Set TPValue = 0 Endif ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif Debug-Output " Combo list out "$(ComboListItemsOut) skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) set BusNumberValue = 0 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif debug-output "before write registry" set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue))) set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue))) set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue))) set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value))) set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value))) set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value))) set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value))) set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue))) set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue))) ifint $(IsISA) == 0 set NewValueList = {{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+ {BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+ {TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) else set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+ {FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+ {BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+ {TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+ {IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif debug-output $(AdapterList) ForListDo $(AdapterList) set BusNumber = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) ifint $(IsISA) == 1 set HardwareDescription = $(GenericAdapterName) set HardwareTitle = $(GenericAdapterName) else set HardwareDescription = $(GenericPCIAdapterName) set HardwareTitle = $(GenericPCIAdapterName) endif set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) set BusNumberValue = 0 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif debug-output "before write registry" set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue))) set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue))) set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue))) set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value))) set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value))) set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value))) set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value))) set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue))) set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue))) ifint $(IsISA) == 0 set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+ {LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+ {LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+ {LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+ {FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+ {BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+ {TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),536875042},+ {SlotNumber, $(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) else set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+ {LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+ {LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+ {LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+ {FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+ {BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+ {TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+ {IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndForListDo EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\PCNTN3" $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) DeleteRegTree $(KeyProduct) "" LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "PCNTN3" set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards" OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards ifstr(i) $(IE_KeyNetcards) != "" EnumRegKey $(IE_KeyNetcards) IE_KeyNameList ForListDo $(IE_KeyNameList) OpenRegKey $(IE_KeyNetcards) "" *($($),1) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo set ProductName = *($(ProductNameInfo), 4) Debug-Output " ProductName = "$(ProductName) ifstr(i) $(ProductName) != "PCNTN3" goto nextnetcard endif GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) Debug-Output " ServiceName = "$(ServiceName) OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey DeleteRegTree $(ServiceKey) "" DeleteRegTree $(NetworkCardKey) "" endif nextnetcard = + EndForListDo endif OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\AMDPCI" $(MAXIMUM_ALLOWED) KeyProduct2 ifstr $(KeyProduct2) == $(KeyNull) LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect set !NTN_InstallMode = Install Shell "" InstallOption $(!STF_LANGUAGE) "AMDPCI" $(SrcDir) "YES" "YES" "NO" set !NTN_InstallMode = Update else endif else endif FreeLibrary $(NCPA_HANDLE) goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMNADAM.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) exit [Install-Helpfile] Debug-Output "At Install-Helpfile" set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif exit [Install-Dll] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif exit [Source Media Descriptions] 1 = "Windows NT Server CD-ROM", TAGFILE = disk1 [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-AMDPCI] 1,AMDPCN.SYS , SIZE=29296 [Files-Dll] 1,AMDDLG.DLL , SIZE=7168 [Files-hlp] 1,PCNET.HLP , SIZE=12288 [LanguagesSupported] ENG [OptionsTextENG] AMDPCI = "AMD PCNET Family Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" GenericAdapterName = "AMD PCNET ISA/VESA Ethernet Adapter" GenericPCIAdapterName = "AMD PCNET PCI Ethernet Adapter" GenericDriverName = "AMD PCNET Family Ethernet Adapter Driver" ProductSoftwareDescription = $(GenericDriverName) ProductHardwareDescription = $(GenericAdapterName) ProductHardwarePCNTN3Description="AMD PCnet Family Driver" ProductSoftwareTitle = $(GenericDriverName) ProductHardwarePCNTN3Title = $(GenericAdapterName) DialogDllName = "amddlg.dll" IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) DMAChannelList = ^(DMAChannelChoices,1) DMAChannelValues = ^(DMAChannelChoices,2) LEDList = ^(LEDChoices,1) LEDValues = ^(LEDChoices,2) FullDuplexList = ^(FullDuplexChoices,1) FullDuplexValues = ^(FullDuplexChoices,2) BusTimerList = ^(BusTimerChoices,1) BusTimerValues = ^(BusTimerChoices,2) [DialogConstantsENG] Help = "&Help" Exit = "Cance&l" OK = "&OK" HelpContext = "" Continue = "C&ontinue" Cancel = "&Cancel" [MemoryMappedChoicesENG] Map_1 = 1, "ON" Map_2 = 0, "OFF" [FileDependentDlgENG] FunctionTitle = $(GenericAdapterName)$(GenericInfVersion) DlgText = "Please select values for the following fields:" Combo1Label = "&I/O Port:" Combo2Label = "IRQ &Number:" Combo3Label = "&DMA Number:" Combo4Label = "&Full Duplex:" Combo5Label = "&Bus Timer:" BigButton = "More pcntn3 BS >>" CheckBox1 = "&TP" Group1 = "&Bus to scan" Radio1 = "&PNP" Radio2 = "&VESA" Radio3 = "&ISA" Radio4 = "&ALL" DlgType = "RadioCombination" DlgTemplate = "PCNTN3" Caption = $(FunctionTitle) CBOptionsGreyed = {} NotifyFields = {NO, NO} HelpContext = 1 Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(IRQList) Combo2Out = $(IRQValue) Combo3List = $(DMAChannelList) Combo3Out = $(DMAChannelValue) Combo4List = $(FullDuplexList) Combo4Out = $(FullDuplexValue) Combo5List = $(BusTimerList) Combo5Out = $(BusTimerValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List} ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out} EditTextIn = "" EditTextLim = "" [IRQChoices] IRQ_1 = "3",3 IRQ_2 = "4",4 IRQ_3 = "5",5 IRQ_4 = "9",9 IRQ_5 = "10",10 IRQ_6 = "11",11 IRQ_7 = "12",12 IRQ_8 = "15",15 IRQ_9 = "Auto_Scan",0 [IOBaseAddrChoices] IOBase_1 = "0x200",512 IOBase_2 = "0x220",544 IOBase_3 = "0x240",576 IOBase_4 = "0x260",608 IOBase_5 = "0x280",640 IOBase_6 = "0x2a0",672 IOBase_7 = "0x2c0",714 IOBase_8 = "0x2e0",746 IOBase_9 = "0x300",768 IOBase_10 = "0x320",800 IOBase_11 = "0x340",832 IOBase_12 = "0x360",864 IOBase_13 = "0x380",896 IOBase_14 = "0x3a0",928 IOBase_15 = "0x3c0",960 IOBase_16 = "0x3e0",992 IOBase_17 = "Auto_Scan",0 [DMAChannelChoices] DMAChannel_1 = "3",3 DMAChannel_2 = "5",5 DMAChannel_3 = "6",6 DMAChannel_4 = "7",7 DMAChannel_5 = "Auto_Scan",0 [LEDChoices] LED_1 = "Default",65536 LED_2 = "0x0",0 LED_3 = "0x2",2 LED_4 = "0x4",4 LED_5 = "0x8",8 LED_6 = "0x10",16 LED_7 = "0x20",32 LED_8 = "0x30",48 LED_9 = "0x34",52 LED_10 = "0x40",64 LED_11 = "0xc0",192 LED_12 = "0x4088",16520 LED_13 = "0xb0",176 LED_14 = "0x21",129 [FullDuplexChoices] FULLDUPLEX_1 = "OFF",1 FULLDUPLEX_2 = "AUI",2 FULLDUPLEX_3 = "UTP",3 FULLDUPLEX_4 = "Default",0 [BusTimerChoices] BUSTIMER_1 = "5",5 BUSTIMER_2 = "6",6 BUSTIMER_3 = "7",7 BUSTIMER_4 = "8",8 BUSTIMER_5 = "9",9 BUSTIMER_6 = "10",10 BUSTIMER_7 = "11",11 BUSTIMER_8 = "12",12 BUSTIMER_9 = "13",13 BUSTIMER_10 = "Default",0 [FileDependentDlgPCIENG] FunctionTitle = $(GenericPCIAdapterName)$(GenericInfVersion) DlgText = "Please select values for the following fields:" Combo1Label = "&Full Duplex:" BigButton = "More of pcntn3 >>" CheckBox1 = "&TP" DlgType = "RadioCombination" DlgTemplate = "PCNTN3PCI" Caption = $(FunctionTitle) CBOptionsGreyed = {} NotifyFields = {NO, NO} HelpContext = 1 Combo1List = $(FullDuplexList) Combo1Out = $(FullDuplexValue) Combo3List = $(LEDList) Combo3Out = $(LED0Value) Combo4List = $(LEDList) Combo4Out = $(LED1Value) Combo5List = $(LEDList) Combo5Out = $(LED2Value) Combo6List = $(LEDList) Combo6Out = $(LED3Value) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} EditTextIn = "" EditTextLim = "" [LEDChoices] LED_1 = "Default",65536 LED_2 = "0x0",0 LED_3 = "0x2",2 LED_4 = "0x4",4 LED_5 = "0x8",8 LED_6 = "0x10",16 LED_7 = "0x20",32 LED_8 = "0x30",48 LED_9 = "0x34",52 LED_10 = "0x40",64 LED_11 = "0xc0",192 LED_12 = "0x4088",16520 LED_13 = "0xb0",176 LED_14 = "0x21",129 [FullDuplexChoices] FULLDUPLEX_1 = "OFF",1 FULLDUPLEX_2 = "AUI",2 FULLDUPLEX_3 = "UTP",3 FULLDUPLEX_4 = "Default",0 [BusTimerChoices] BUSTIMER_1 = "5",5 BUSTIMER_2 = "6",6 BUSTIMER_3 = "7",7 BUSTIMER_4 = "8",8 BUSTIMER_5 = "9",9 BUSTIMER_6 = "10",10 BUSTIMER_7 = "11",11 BUSTIMER_8 = "12",12 BUSTIMER_9 = "13",13 BUSTIMER_10 = "Default",0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.