1. BEN110.ZIP Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (BEN110.ZIP)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
[Identification]
	OptionType = NetAdapter

[PlatformsSupported]
	ISA
	EISA
	PCI

[LanguagesSupported]
	ENG

[FileConstants]
UtilityInf		= "UTILITY.INF"
ParamInf			= "NCPARAM.INF"
subroutineinf  = "SUBROUTN.INF"
NwSubsInf		= "NWSUBS.INF"
Exit_Code		= 0

NetEventDLL	 = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL	 = "%SystemRoot%\System32\IoLogMsg.dll"

Manufacturer			= "Novell"
ProductMajorVersion	= "1"
ProductMinorVersion	= "0"
ProductVersion			= $(ProductMajorVersion)"."$(ProductMinorVersion)
DriverName				= "OdiLoad"
OdiModules			 	= "ODI_Modules"


NetRuleHardwareType		  = "nwDriver nwAdapter"
NetRuleHardwareBindForm	  = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DriverName)"\CurrentVersion"
;
; ParamKeyname not used - not updated
; ParamKeyName	= $(!NTN_ServiceBase)"\"$(ProductHardware$(Option)Name)"\Parameters"
;

[GeneralConstants]
from	= ""
to		= ""
ExitCodeOk	 	= 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull		 		= ""
MAXIMUM_ALLOWED	= 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct	  		= ""
KeyParameters		= ""

TRUE			= 1
FALSE			= 0
NoTitle		= 0

ExitState	= "Active"
OldVersionExisted = $(FALSE)

DriverPath	  = $(!STF_NTPATH)\netware

[ODIParameters]
	ODINodeAddress = ""
	ODIDriverAdditionalParms = {}
	ODICustomList = {}
	ODITokenRing		= ""
	ODITokenRingSnap	= ""
	;
	; File specific Parameters:
	;   ISA LAN Driver file:
	;		ODISlotList = {}
	;		ODIDefaultSlot = ""
	;	 MCA and EISA LAN Driver files:
	;		ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
	;		ODIDefaultSlot = "2"
	;
	ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
	ODIDefaultSlot = ""

[date]
	Now = {} ? $(!LIBHANDLE) GetSystemDate


[Identify]
	read-syms Identification

	set Status		= STATUS_SUCCESSFUL
	set Identifier = $(OptionType)
	set Media		= #("Source Media Descriptions", 1, 1)

	Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
	set Status		= STATUS_FAILED
	set OptionList	 = {}
	set OptionTextList = {}

	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) in $(LanguageList)
		ifstr(i) $($1) == ""
			goto returnoptions
		endif

		set PlatformList = ^(PlatformsSupported, 1)
		Ifcontains(i) $($1) in $(PlatformList)
			goto returnoptions
		else
			set Status = STATUS_NOTSUPPORTED
			goto finish_ReturnOptions
		endif
	else
		set Status = STATUS_NOLANGUAGE
		goto finish_ReturnOptions
	endif

returnoptions = +
	set OptionList	 = ^(Options, 1)
	set OptionTextList = {}

	ForListDo $(OptionList)
		set OptionTempString = " ODI "#($($),Title,1)" Adapter for NetWare"
		set OptionTextList = >($(OptionTextList), $(OptionTempString) )
	EndForListDo

	set Status		 = STATUS_SUCCESSFUL

finish_ReturnOptions = +
	Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
	set Option	= $($1)
	set SrcDir	= $($2)
	set AddCopy  = $($3)
	set DoCopy	= $($4)
	set DoConfig = $($5)

	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) NOT-IN $(LanguageList)
		Return STATUS_NOLANGUAGE
	endif

	set-subst LF = "\n"
	read-syms GeneralConstants
	read-syms FileConstants
	read-syms ODIParameters
	read-syms DialogConstants$(!STF_LANGUAGE)
	ifstr(i) $(!NTN_Origination) == "NCPA"
		set Continue = "OK"
	endif
	read-syms FileConstants$(!STF_LANGUAGE)

	detect date

;	set-title  $(Function$(Option)Title)

	set to	= Begin
	set from = Begin
	set CommonStatus = STATUS_SUCCESSFUL

	EndWait

Begin = +

	Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
		goto skipmakingthelists
	else-Ifstr(i) $(!NTN_InstallMode) == Update
		set StartLabel = UpgradeSoftware
		goto skipmakingthelists
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
		goto skipmakingthelists
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set StartLabel = configureadapter
	else
		set DoCopy = YES
		set AddCopy = YES
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
	endif

	set ParameterListNames = ^(DefaultParameterLists, 1)	; NWIRQList, NWMEMList1, etc.
	set ListNames = ^(ODIListNamesSection, 1)					; List1, list2, ..., list6
	set ODIKeywordList = ^(ChoicesNamesList, 1)				; Int, mem, Port, etc.
	set ODITitleList = ^(ChoicesNamesList, 2)					; Interrupt Number, Port, etc.
	set MSParameterList = ^(ChoicesNamesList, 3)				; InterruptNumber, IOBaseAddress, etc.

	set DriverListNames = {}
	set ODINumberofDriverLists = 0
	ForListDo ^($(Option),0 )
		ifcontains(i) $($) IN $(ListNames)
			set DriverListNames = >($(DriverListNames), $($))
		else-ifstr(i) $($) == "CUSTOM"
			set ODICustomList = #($(Option), Custom, 1)
		endif
	EndForListDo

	QueryListSize ODINumberofDriverLists $(DriverListNames)

;
; DriverListNames now contains the List names the selected ODI driver has (i.e. {List1, List2})
; ODINumberofDriverLists now contains the number of lists used
;

	Debug-Output "DriverListNames = "$(DriverListNames)
	Debug-Output "Size of DriverListNames = "$(ODINumberofDriverLists)

	ForListDo $(DriverListNames)
		set $($)Keyword = #($(Option), $($), 1)
		ifstr $($($)Keyword) != ""
			set $($)Default = #($(Option), $($), 3)

			ifcontains(i) $($($)Keyword) IN $(ODIKeywordList)
				set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword)))
				set ThisListName = #($(Option), $($), 2)
				set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword)))
				set FinalList = {}

				ifcontains(i) $(ThisListName) IN $(ParameterListNames)
					ifstr(i) #($(Option), $($), 4) == "ALL"
						set FinalList = ^($(ThisListName), 1)
					else
						set CountUpTo = #($(Option), $($), 5)

						ifstr(i) $(CountUpTo) == "END"
							set CountUpTo = $(MAXIMUM_ALLOWED)
						endif

						set StartNumber = #($(Option), $($), 4))

						ForListDo ^($(ThisListName), 1)
							ifint $(#) >= $(StartNumber)
								ifint $(#) <= $(CountUpTo)
									set FinalList = >($(FinalList), $($))
								endif
							endif
						EndForListDo
					endif
				else
					;
					; User passed in the list
					;
					Debug-Output "User passed in a list"
					set $($)Title = #($(Option), $($), 2)
					set FinalList = #($(Option), $($), 4)
				endif
			else
				;
				; User passed in a new keyword
				;
				Debug-Output "User passed in a new keyword"
				set $($)Title = #($(Option), $($), 2)
				set MSParameterName$(#) = ""
				set FinalList = #($(Option), $($), 4)
			endif
		set $($)List = $(FinalList)
		endif
	Debug-Output "List"$(#)"Title = "$($($)Title)
	Debug-Output "List"$(#)"Default = "$($($)Default)
	Debug-Output "List"$(#)"Keyword = "$($($)Keyword)
	Debug-Output "List"$(#)"List = "$($($)List)
	Debug-Output "MSParameterName"$(#)" = "$(MSParameterName$(#))
	EndForListDo

skipmakingthelists = +

	set ODILANDriverTitle = #($(Option), Title, 1)
	Split-String #($(Option), DriverName, 2) "." SplitFileNameList
	set ODILANDriverName = *($(SplitFileNameList), 1)
	set ODIMediaType = #($(Option), MediaType, 1)
	Debug-Output "ODILANDriverName = "$(ODILANDriverName)
	Debug-Output "ODIMediaType = "$(ODIMediaType)

	set from = $(fatal)
	set to = $(fatal)
	goto $(StartLabel)

installadapter = +
	Ifstr(i) $(DoCopy) == "YES"
		;
		;  Get source location
		;
		Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES

		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto end
		Endif

		Set SrcDir = $($R1)
	Endif

	install "Install-Option"

	goto adapteroptions

configureadapter = +
	Ifstr $(KeyProduct) == $(KeyNull)
		OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
		Ifstr $(KeyProduct) == $(KeyNull)
			set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
			Debug-Output "OEMNADNH.INF: Cannot find component product key "$(!NTN_RegBase)
			goto fatalregistry
		Endif
	Endif

	Set AdapterNumber = ""

	Shell $(UtilityInf) FindService, $(KeyProduct)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: FindService shell failure "$($ShellCode)
		Goto ShellCodeError
	Endif
	Ifstr(i) $($R0) != NO_ERROR
		Debug-Output "OEMNADNH.INF: FindService Error "$($R0)
		Goto fatalregistry
	endif

	set KeyParameters = $($R2)
	set ServiceAreaHandle = $($R1)

	Ifstr $(KeyParameters) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMNADNH.INF: Cannot find component service "$(KeyProduct)
		goto fatalregistry
	endif

	set OldVersionExisted = $(TRUE)

	set ValueName = ""
	set ValueData = ""
	set ValueStr  = ""
	set ValueList = {}

	GetRegValue $(KeyParameters) ODILoadName ODILoadName
	Set CardInstanceName = *($(ODILoadName),4)

	Ifstr $(CardInstanceName) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMNADNH.INF: Cannot find CardInstanceName"
		goto fatalregistry
	endif

	set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
	OpenRegKey $(!REG_H_LOCAL) ""  $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey
	Ifstr $(DriverKey) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMNADNH.INF: Cannot find component product key = "$(KeyToFind)
		goto fatalregistry
	Endif

	GetRegValue $(DriverKey) Parameters ParameterList

	;  get the data portion
	set ParameterList = *($(ParameterList), 4)

	Debug-Output "parameter list = "$(ParameterList)

	ForListDo $(ParameterList)
		set ThisParameterList = $($)
		Split-String $($) " " SplitList
		set KeyToSearchFor = *($(SplitList), 1)
		set ValueToUse = *($(SplitList), 3)
		Debug-Output "Keytosearchfor = "$(KeyToSearchFor)
		Debug-Output "ValueToUse = "$(ValueToUse)
		;
		;   #1    #2     #3
		; "Parm"  " "	 "Value"
		;
		set ValueFound = 0

		;
		; check frametypes for TOKEN-RING, TOKEN-RING_SNAP
		;
		ifstr(i) $(KeyToSearchFor) == "FRAME"
			;
			; Don't append Frametypes to ODIAdditionalParms, so set ValueFound = 1
			;
			set ValueFound = 1
			QueryListSize SplitListSize $(SplitList)
			ifstr(i) *($(SplitList), 3) == "TOKEN-RING"
				set LastParameter = *($(SplitList), $(SplitListSize))
				ifstr(i) $(LastParameter) == "MSB"
					set ODITokenRing = "MSB"
				else-ifstr(i) $(LastParameter) == "LSB"
					set ODITokenRing = "LSB"
				else
					;
					; Not there, so default to MSB
					;
					set ODITokenRing = "MSB"
				endif
			else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP"
				set LastParameter = *($(SplitList), $(SplitListSize))
				ifstr(i) $(LastParameter) == "MSB"
					set ODITokenRingSnap = "MSB"
				else-ifstr(i) $(LastParameter) == "LSB"
					set ODITokenRingSnap = "LSB"
				else
					;
					; Not there, so default to MSB
					;
					set ODITokenRingSnap = "MSB"
				endif
			endif
		;
		; Check for NODE parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "NODE"
			set ODINodeAddress = $(ValueToUse)
			set ValueFound = 1
		;
		; Check for SLOT parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "SLOT"
			set ODIDefaultSlot = $(ValueToUse)
			set ValueFound = 1
		endif

		ForListDo $(DriverListNames)
			ifstr(i) $(KeyToSearchFor) == $($($)Keyword)
				set $($)Default = $(ValueToUse)
				set ValueFound = 1
				ifcontains(i) $(ValueToUse) NOT-IN $($($)List)
					set $($)List = >($($($)List), $(ValueToUse))
				endif
			endif
		EndForListDo

		Debug-Output "Value Found = "$(ValueFound)

		ifint $(ValueFound) == 0
			set FoundInCustom = 0

			ForListDo $(ODICustomList)
				ifstr(i) $($) == $(ThisParameterList)
					set FoundInCustom = 1
				endif
			EndForListDo

			Debug-Output "Found in Custom = "$(FoundInCustom)

  			ifint $(FoundInCustom) == 0
				ifstr $(ODIDriverAdditionalParms) == {}
					set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse)
				else
					set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse))
				endif
			endif
		endif
	EndForListDo

	Debug-Output "AdditionalParms = "$(ODIDriverAdditionalParms)
	Debug-Output "CustomList = "$(ODICustomList)

adaptersetup =+

	goto adapteroptions
adapteroptions = +
	set from = adapteroptions

	LoadLibrary "NetWare for MS Windows NT" nwsetup.dll NwLibHandle
	SetHelpFile "nwnthelp.hlp" $(!MinimumID) $(!MaximumID)

dothedialog = +
	ifint $(ODINumberofDriverLists) == 0
		ifstr(i) $(!NTN_InstallMode) == configure
			read-syms NoParms$(!STF_LANGUAGE)
			ui start "WorkstationDLG" $(NwLibHandle)

			ifstr(i) $(DLGEVENT) == "CONTINUE"
				Debug-Output "OK hit"
			else-ifstr(i) $(DLGEVENT) == "EXIT"
			;
			; user selected the advanced button
			;
				goto doadvancedsettings
			endif
		endif
	else
		read-syms LANDriverDlg$(!STF_LANGUAGE)

		set NotifyFields = {}
		set ComboListItemsIn = {}
		set ComboListItemsOut = {}
		ForListDo $(DriverListNames)
			set NotifyFields = >($(NotifyFields), "NO")
			set ComboListItemsIn = >($(ComboListItemsIn), $($)List)
			ifstr $($($)Value) == ""
				set $($)Value = $($($)Default)
			endif
			set ComboListItemsOut = >($(ComboListItemsOut), $($)Value)
		EndForListDo

		ui start "LANDriverParms" $(NwLibHandle)

		ifstr(i) $(DLGEVENT) == "CONTINUE"
			Debug-Output "Continue hit"
		else-ifstr(i) $(DLGEVENT) == "BACK"
			Debug-Output "Action: CANCEL. Bye."
			set CommonStatus = STATUS_USERCANCEL
			ui pop 1
			FreeLibrary $(NwLibHandle)
			goto end
		else-ifstr(i) $(DLGEVENT) == "EXIT"

doadvancedsettings =+
		;
		; user selected the advanced button
		;
			Debug-Output "Action: ADVANCED DIALOG"
			read-syms AdvancedDialog$(!STF_LANGUAGE)
			set RadioIn = {}
			set ComboListItemsIn = {}
			set ComboListItemsOut = {}
			set ComboOut = $(ODIDefaultSlot)

			ifstr(i) $(ODIMediaType) == "TOKEN-RING"
				ifstr(i) $(ODISlotList) == {}
					set DlgTemplate = "DLG_ADVANCEDDRIVER3"
				else
					set ComboListItemsIn = { ODISlotList }
					set ComboListItemsOut = { ComboOut }
					set DlgTemplate = "DLG_ADVANCEDDRIVER1"
				endif

				ifstr(i) $(ODITokenRing) == "LSB"
					set RadioIn = { 2 }
				else
					set RadioIn = { 1 }
				endif

				ifstr(i) $(ODITokenRingSnap) == "LSB"
					set RadioIn = >($(RadioIn), "4")
				else
					set RadioIn = >($(RadioIn), "3")
				endif
			else
				ifstr(i) $(ODISlotList) == {}
					set DlgTemplate = "DLG_ADVANCEDDRIVER4"
				else
					set ComboListItemsIn = { ODISlotList }
					set ComboListItemsOut = { ComboOut }
					set DlgTemplate = "DLG_ADVANCEDDRIVER2"
				endif
			endif

			ui start "AdvancedDialog" $(NwLibHandle)
			ui pop 1

			ifstr(i) $(DLGEVENT) == "CONTINUE"
				set ODINodeAddress = *($(EditTextOut), 1)
				set ODIDefaultSlot = *($(ComboOut), 1)
				ifcontains "2" IN $(RadioOut)
					set ODITokenRing = "LSB"
				else
					set ODITokenRing = "MSB"
				endif
				ifcontains "4" IN $(RadioOut)
					set ODITokenRingSnap = "LSB"
				else
					set ODITokenRingSnap = "MSB"
				endif
			else-ifstr(i) $(DLGEVENT) == "BACK"
				Debug-Output "Action: CANCEL. Bye."
			endif

			goto dothedialog
		else
			Debug-Output "Action: unknown. Bye."
			ui pop 1
			FreeLibrary $(NwLibHandle)
			goto end
		endif

		ui pop 1


		ForListDo $(DriverListNames)
			Debug-Output "List"$(#)"Value = "$($($)Value)
		EndForListDo
	endif

	FreeLibrary $(NwLibHandle)

	ifint $(OldVersionExisted) == $(TRUE)
		ifstr(i) $(!NTN_InstallMode) == configure
			goto writeparameters
		endif
	endif

	StartWait
	Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

	ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	endif

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: Cannot add hardware component "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "OEMNADNH.INF: Registry error: add hardware component "$(RegistryErrorIndex)
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
	endif

	set KeyParameters = $($R3)
	set KeyAdapterRules = $($R2)
	set AdapterNumber = $($R4)

	Set-add TempAdapterNumber = $(AdapterNumber),0

	set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)

	set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
						{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] ODI "$(ODILANDriverTitle)" Adapter for NetWare"},+
						{Description,$(NoTitle),$(!REG_VT_SZ),"ODI "$(ODILANDriverTitle)" Adapter for NetWare"},+
						{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
						{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
						{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
						{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}

	Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	CloseRegKey $($R1)

	set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
	set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
						{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
						{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

	Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "OEMNADNH.INF: AddValueList Registry error "$(RegistryErrorIndex)
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
	endif

	CloseRegKey $(KeyAdapterRules)

	SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}

	goto writeparameters
writeparameters = +
	Shell $(UtilityInf), GetBusTypeNum
	set BusTypeNum = $($R1)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: GetBusTypeNum ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
								{MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}

	ForListDo $(DriverListNames)
		ifstr $(MSParameterName$(#)) != ""
			set-hextodec DecValue = $($($)Value)
			set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle),$(!REG_VT_DWORD), $(DecValue)}
			set NewValueList = >($(NewValueList), $(ValueToAdd))
		endif
	EndForListDo
	
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

	CloseRegKey $(KeyParameters)

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "OEMNADNH.INF: AddValueList Registry error "$($ShellCode)
		goto fatalregistry
	endif

	EndWait

	set PromptForSrcRouting = "FALSE"

	Debug-Output "ODIMediaType = "$(ODIMediaType)

	Ifstr(i) $(ODIMediaType) == "ETHERNET"
		set ODIParmList = {"Frame ETHERNET_802.2", +
								 "Frame ETHERNET_802.3", +
								 "Frame ETHERNET_II", +
								 "Frame ETHERNET_SNAP"}

	else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
		set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
								 "Frame TOKEN-RING_SNAP "$(ODITokenRingSnap)}
		set PromptForSrcRouting = "TRUE"

	else-Ifstr(i) $(ODIMediaType) == "FDDI"
		set ODIParmList = {"Frame FDDI_802.2", +
								 "Frame FDDI_SNAP"}
		set PromptForSrcRouting = "TRUE"

	else
		set ODIParmList = {}
	endif

	Debug-Output "Framenames = "$(ODIParmList)


	;
	; Build List to send to ODI_MODULES\CARDNAME
	;
	ForListDo $(DriverListNames)
		set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
	EndForListDo

	ifstr $(ODINodeAddress) != ""
		set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
	endif

	ifstr $(ODIDefaultSlot) != ""
		set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
	endif

	ForListDo $(ODIDriverAdditionalParms)
		ifstr $($) != ""
			set ODIParmList = >($(ODIParmList), $($))
		endif
	EndForListDo

	ForListDo $(ODICustomList)
		ifstr $($) != ""
			set ODIParmList = >($(ODIParmList), $($))
		endif
	EndForListDo


	Debug-Output "ODIParmList = "$(ODIParmList)


	Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) $(AdapterNumber) $(ODIParmList)

	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: NwAddOdiLoadModule failure "$($ShellCode)
		Goto ShellCodeError
	Endif

	Set ErrorString = $($R0)
	Ifstr(i) $(ErrorString) != NO_ERROR
		Debug-Output "OEMNADNH.INF: NwAddOdiLoadModule "$(ErrorString)
		goto fatalregistry
	Endif

	Debug-Output "PromptForSrcRouting = "$(PromptForSrcRouting)
	Ifstr(i) $(PromptForSrcRouting) == "TRUE"
		set DlgType	  = "MessageBox"
	set STF_MB_TITLE = "Configure ODI Source Routing"
	set STF_MB_TEXT  = "Use ODI Source Routing support?"
	set STF_MB_TYPE  = 3
	set STF_MB_ICON  = 1
	set STF_MB_DEF	= 2
	ui start "SourceRoutingBox"
	ifstr(i) $(DLGEVENT) == "YES"
		 OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\ROUTE" $(MAXIMUM_ALLOWED) KeySetup
		 Ifstr(i) $(KeySetup) != ""
			  SetRegValue $(KeySetup) {Start,$(NoTitle),$(!REG_VT_DWORD), "2"}
				  CloseRegKey $(KeySetup)
				  Debug-Output "OEMNADNA.INF: Start value set to Automatic (0x2)"
		 Endif
	else
		 OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\ROUTE" $(MAXIMUM_ALLOWED) KeySetup
		 Ifstr(i) $(KeySetup) != ""
			  SetRegValue $(KeySetup) {Start,$(NoTitle),$(!REG_VT_DWORD), "4"}
				  CloseRegKey $(KeySetup)
				  Debug-Output "OEMNADNA.INF: Start value set to Disabled (0x4)"
		 Endif
	endif
	Endif

	Ifstr(i) $(!NTN_InstallMode) == install
		Set OdiAdapterInstalledOkay = "1"
	Endif
	goto successful

bindingadapter =+
	set Error = "Binding: Sorry, not yet implemented."
	goto fatal

removeadapter = +
	Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: Shell Error NwRemoveAdapter "$($ShellCode)
	Endif

	Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: NwRemoveNtAdapter "$($ShellCode)
		goto ShellCodeError
	Endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "OEMNADNH.INF: NwRemoveNtAdapter "$(RegistryErrorIndex)
		Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR"
			goto ShellCodeError
		Endif
		goto fatalregistry
	Endif

	goto end

UpgradeSoftware = +
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
		  $(MAXIMUM_ALLOWED) NetworkCardKey
	Ifstr(i) $(NetworkCardKey) != $(KeyNull)
		GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
		set ServiceName = *($(ServiceNameInfo), 4)

		OpenRegKey $(NetworkCardKey) "" "NetRules" +
			$(MAXIMUM_ALLOWED) NetRuleKey
		Ifstr(i) $(NetRuleKey) != $(KeyNull)
		else
			goto fatalregistry
		endif

		CloseRegKey $(NetRules)
		CloseRegKey $(NetworkCardKey)
	else
		goto fatalregistry
	endif
	OpenRegKey $(!REG_H_LOCAL) "" +
		  $(!NTN_ServiceBase)"\"$(ServiceName) +
		  $(MAXIMUM_ALLOWED) ServiceKey

	Ifstr(i) $(ServiceKey) != $(KeyNull)
		CloseRegKey $(ServiceKey)
	else
		goto fatalregistry
	endif

	goto end

successful = +
	goto end

abandon = +
	ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer) $($)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: NwRemoveNtAdapter "$($ShellCode)
		goto ShellCodeError
	Endif

		set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	EndForListDo

	goto end

warning = +
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(to)
	else-ifstr(i) $($R1) == "CANCEL"
		goto $(from)
	else
		goto "end"
	endif


nonfatalinfo = +
	Set CommonStatus = STATUS_USERCANCEL
	Set Severity = STATUS
	goto nonfatalmsg
nonfatal = +
	Set Severity = NONFATAL
	goto nonfatalmsg
nonfatalmsg = +
	ifstr(i) $(Error) == ""
		Set Severity = NONFATAL
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(from)
	else
		goto "end"
	endif

fatalregistry = +
	Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	set Error = $($R0)
	goto fatal

fataldetect = +
	Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADNH.INF: ShellCode error: cannot get an error string."
		goto ShellCodeError
	endif
	set Error = $($R0)
	Goto fatal
fatal = +
	ifstr(i) $(Error) == ""
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	goto setfailed

ShellCodeError = +
	set DlgType	  = "MessageBox"
	set STF_MB_TITLE = "Error: "$(Function$(Option)Title)
	set STF_MB_TEXT  = "Shell Code Error"
	set STF_MB_TYPE  = 1
	set STF_MB_ICON  = 3
	set STF_MB_DEF	= 1
	ui start "Error Message"
	goto setfailed

setfailed = +
	set CommonStatus = STATUS_FAILED
	ifstr(i) $(OEM_ABANDON_ON) == TRUE
		set OEM_ABANDON_ON = FALSE
		goto abandon
	endif
	goto end

end = +
	goto term

term = +
	Ifstr(i) $(OdiAdapterInstalledOkay) == "1"
		Shell $(NwSubsInf) GetOdiAdapterList
		ifint $($R3) < 2
			Set DlgType = "MessageBox"
			Set STF_MB_TITLE = "NetWare ODI LAN Drivers Setup"
			Set STF_MB_TEXT  = "The NetWare ODI Adapter was successfully installed.  "+
							"Your NetWare installation is COMPLETE, unless "+
					"you need to install ODINSUP or Configure the software."
			Set STF_MB_TYPE  = 1
		Set STF_MB_ICON  = 3
		Set STF_MB_DEF	= 1
		ui start "Error Message"
	Endif
	Endif

	Return $(CommonStatus)

[Install-Option]
	set STF_VITAL = ""

	ifstr(i) $(AddCopy) == "YES"
		AddSectionKeyFileToCopyList $(Option) DriverName $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
	endif

	ifstr(i) $(DoCopy) == "YES"
		set !STF_NCPA_FLUSH_COPYLIST = TRUE
		CopyFilesInCopyList
	endif

	ifstr(i) $(DoConfig) == "YES"
	endif

	Exit

;[Install-Update]
;	set STF_VITAL		= ""
;	set STF_OVERWRITE	= "VERIFYSOURCEOLDER"
;
;	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
;	AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
;	set !STF_NCPA_FLUSH_COPYLIST = TRUE
;	CopyFilesInCopyList
;
;	exit

[Source Media Descriptions]
	1  = "NetWare ODI LAN Drivers Disk"  , TAGFILE = oemsetup.inf
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386


[DialogConstantsENG]
Help		= "&Help"
;Exit		= "&Cancel"
OK		  = "OK"
HelpContext = ""
Continue	= "&Continue"
Cancel	  = "&Cancel"
Advanced = "&Advanced"
IDH_NETWAREWRKSTATIONPARMS =  901
IDH_NETWAREIPXBIND         =  902
IDH_IPXSPXPARMS            =  903
IDH_NETWORKPROTOCOL        =  904
IDH_NETWAREODISETTINGS     =  905
IDH_NETWARECLIENTINSTALL   =  906
IDH_NETWARENDISODI         =  907
IDH_NODEADDRESSOVERIDE     =  908
IDH_RESMGRCONFIG				=  951

[LANDriverDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "List"$(ODINumberofDriverLists)
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(IDH_NETWAREODISETTINGS)


[NoParmsENG]
DlgType = "RadioCombination"
DlgTemplate = "NO_PARAMETERS"
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = ""
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}
NotifyFields = {}


[AdvancedDialogENG]
DlgType = "RadioCombination"
Caption = "Advanced Settings"
EditTextIn = $(ODINodeAddress)
EditTextLim = 13
CBOptionsGreyed = {}
HelpContext = $(IDH_NODEADDRESSOVERIDE)
NotifyFields = {}


[FileConstantsENG]
ProCaption	= "NetWare ODI LAN Drivers Setup"
ProCancel	= "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed.  "+
				"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1	 = "Copying:"
ProText2	 = "To:"

[ChoicesNamesList]
"Int",				"Interrupt Number",	"InterruptNumber"
"Port",				"Port",					"IOBaseAddress"
"Mem", 				"Memory Address",		"MemoryMappedBaseAddress"
"Dma",				"DMA Channel",			"DMAChannel"

[ODIListNamesSection]
	List1
	List2
	List3
	List4
	List5
	List6

[DefaultParameterLists]
	NWIRQList1
	NWIRQList2
	NWPORTList1
	NWPORTList2
	NWPORTList3
	NWDMAList1
	NWMEMList1

[NWIRQList1]
Num1 =	2
Num2 =	3
Num3 =	4
Num4 =	5
Num5 =	6
Num6 =	7
Num7 =	9
Num8 =	10
Num9 =	11
Num10 =	15

[NWIRQList2]
Num1 =	3
Num2 =	4
Num3 =	5
Num4 =	9



[NWDMAList1]
Num1 = 1
Num2 = 2
Num3 = 3
Num4 = 4
Num5 = 5
Num6 = 6
Num7 = 7


[NWPORTList1]
Num1  = 200
Num2  = 220
Num3  = 240
Num4  = 260
Num5  = 280
Num6  = 2A0
Num7  = 2C0
Num8  = 2E0
Num9  = 300
Num10 = 320
Num11 = 340
Num12 = 360
Num13 = 380
Num14 = 3A0
Num15 = 3C0
Num16 = 3E0

[NWPORTList2]
Num1  = 200
Num2  = 220
Num3  = 240
Num4  = 260
Num5  = 280
Num6  = 300
Num7  = 320
Num8  = 340
Num9  = 360
Num10 = 380

[NWPORTList3]
Num1  = A20
Num2  = A24

[NWMEMList1]
Num1 = C0000
Num2 = C4000
Num3 = C8000
Num4 = CC000
Num5 = D0000
Num6 = D4000
Num7 = D8000
Num8 = DC000

; **************************************************************************
; *  ODI LAN DRIVER SECTION                                                *
; **************************************************************************

[Options]
	ODI_PCNETPCI
	ODI_PCNET32
	ODI_PCNETPNP
	ODI_PCNETISA


[ODI_PCNETPCI]
Title = "Boca Research Network Driver BENPCI."
DriverName = 1, BOCANW.LAN
MediaType = "ETHERNET"
Custom = {"BUSTYPE","BOARD","FDUP","LED0","LED1","LED2"}
List1 = "BUSTYPE", "Bustype Parameter", "PCI", {"PCI","PCI1","PCI2"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "FDUP", "Full Duplex Support", "DON'TCARE", {"DON'TCARE","OFF","UTP","AUI"}
List4 = "LED0","LED0 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNET32]
Title = "Boca Research Network Driver for BEN1VL."
DriverName = 1, BOCANW.LAN
MediaType = "ETHERNET"
Custom = {"BUSTYPE","BOARD","LED0","LED1","LED2","LED3"}
List1 = "BUSTYPE", "Bustype Parameter", "VESA", {"VESA"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "LED0","LED0 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List4 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED3","LED3 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNETPNP]
Title = "Boca Research Network Driver for BEN110/BEN120."
DriverName = 1, BOCANW.LAN
MediaType = "ETHERNET"
Custom = {"BUSTYPE","BOARD","FDUP","LED0","LED1","LED2"}
List1 = "BUSTYPE", "Bustype Parameter", "PNP", {"PNP"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "FDUP", "Full Duplex Support", "DON'TCARE", {"DON'TCARE","OFF","UTP","AUI"}
List4 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED3","LED3 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNETISA]
Title = "Boca Research Network Driver for BEN100."
DriverName = 1, BOCANW.LAN
MediaType = "ETHERNET"
Custom = {"LED0","LED1","LED2"}
List1 = "PORT", NWPORTList2, "300", 6, 9
List2 = "INT", NWIRQList2, "3", ALL
List3 = "DMA", "DMA Channel", "5", {3,5,6,7}
List4 = "LED0","LED0 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 0.65