1. sp2500k.zip Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (sp2500k.zip)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³	    Micronet SP2500K PCI Fast Ethernet Adapter		³
³	 NDIS/2 DRIVER FOR LANTASTIC DRIVER INSTALLATION	³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

  Content:
  --------

      A) Install NDIS 2 drivers for LANtastic 5.0

      B) Install NDIS 2 drivers for LANtastic 6.0


A) Install NDIS 2 drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using NDIS driver:
   ----------------------
   For NDIS driver, we support "ETHPCI.DOS" driver for
   SP2500K PCI (Fast) Ethernet adapter.  User can use
   "ETHPCI.DOS" driver to replace AEXNDIS.DOS which is the
   NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

	DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
	DEVICE=C:\LANTASTI\ETHPCI.DOS	   -------> from Driver Diskette


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

	C:\LANTASTI\AI-NDIS BIND_TO=ETHPCI_NIF
	C:\LANTASTI\AILANBIO
	C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

	[PROTMAN]
	   DRIVERNAME = PROTMAN$
	   DYNAMIC = YES

	[ETHPCI_NIF]
	   DRIVERNAME = ETHPCI$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install NDIS 2 drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support following driver: NDIS driver


  Using NDIS driver:
  ----------------------

   To install NDIS driver "ETHPCI.DOS", user can use
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters" then insert Driver Diskette , and type path
   "A:\NDIS\DOS".  Install program will search "ETHPCI.DOS" and
   "PROTOCOL.INI" and copy these two files to target directory.

   IF user already install LANtastic 6.0 and want to install
   SP2500K PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   the SP2500K PCI LAN adapter NDIS driver "ETHPCI.DOS" at
   CONFIG.SYS

   "ETHPCI.DOS"  is NDIS driver from driver diskette
   "AEXNDIS.DOS" is NDIS driver which supported by ARTISOFT


   Example  -----  CONFIG.SYS

	DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
	DEVICE=C:\LANTASTI\ETHPCI.DOS	     -------> from drivers diskette


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = ETHPCI_NIF
      LANABASE = 1

    [ETHPCI_NIF]
      DriverName = ETHPCI$

-----
All trademarks or brand names mentioned are properties
of their respective companies.

--- End of File ---